Indholdet er maskineoversat. Se Ansvarsfraskrivelse for maskinoversættelse.

Why am I still able to delete files in a WORM shared folder?

Hvorfor kan jeg stadig slette filer i en WORM delt mappe?

Last modified date: 2024-04-10

Applicable Products

QuTS hero
QES

Root Cause

In a shared folder which has WORM (Write Once Read Many) enabled, you can modify or delete a newly created file under one of the following conditions:

Lock delay is enabled, and the file is still within its lock delay period.
Manual lock is enabled (QuTS hero) or lock delay is disabled (QES), and you have not manually locked the file yet.

Lock Delay

If lock delay is enabled, after a file is created it can still be modified or deleted if the lock delay period has not passed. However, note that the lock delay period resets every time you modify the file within its current lock delay period.

For example, if you configured a lock delay period of 5 minutes, and you created a file at 10:00 AM and do not make any further modifications, the file will be locked at 10:05 AM. However, if you make one modification within the first 5 minutes, let's say at 10:03 AM, then the file will be locked at 10:08 AM.

Note

The time a file actually becomes locked might vary from the specified time by +/- 1 minute.

Configuring lock delay in QuTS hero

Note

You can only configure WORM settings during shared folder creation.
For details on shared folder creation, see "Creating a Shared Folder" in the QuTS hero User Guide.

In the Create Shared Folder Wizard window, go to Storage Settings.
Under WORM Settings, select WORM.
Under Lock setting, select Lock automatically after this amount of time.
Specify the lock delay period.
The maximum lock delay is 168 hours and 59 minutes.

Configuring lock delay in QES

Note

You can only configure WORM settings during shared folder creation.
For details on shared folder creation, see "Creating a Shared Folder" in the QES User Guide.

In the Create a Shared Folder window, go to WORM Settings.
Select WORM.
Select Lock delay.
Specify the lock delay period.
The maximum lock delay is 168 hours and 59 minutes.

Manual Lock

You can also configure files and subfolders in the shared folder to be manually locked from a remote client. In this case, a file or subfolder can be modified and deleted any time as long as you have not manually locked it yet.

Configuring manual lock in QuTS hero

Note

You can only configure WORM settings during shared folder creation.
For details on shared folder creation, see "Creating a Shared Folder" in the QuTS hero User Guide.

In the Create Shared Folder Wizard window, go to Storage Settings.
Under WORM Settings, select WORM.
Under Lock setting, select Lock manually (set file permission to read-only).

Configuring manual lock in QES

Note

You can only configure WORM settings during shared folder creation.
For details on shared folder creation, see "Creating a Shared Folder" in the QES User Guide.

In the Create a Shared Folder window, go to WORM Settings.
Select WORM.
Deselect Lock delay.
When lock delay is disabled, manual lock is enabled by default.

Manually locking a file or folder from Windows File Explorer

In Windows, open File Explorer.
Go to the file or folder you want to lock.
Right-click the file or folder and select Properties.
Go to the General tab.
Next to Attributes, select Read-only.
Click Apply.

Manually locking a file or folder from Linux

In Linux, open a terminal.
Go to the parent folder of the file or folder you want to lock.
Enter the following command to change the file or folder permissions to read-only:
```
chmod -R 444 [file_or_folder_name]
```
For example, if you want to lock a folder and the folder name is "RO01/", enter "chmod -R 444 RO01/".

Gældende produkter

QuTS hero
QES

Rodårsag

I en delt mappe, som har WORM (Write Once Read Many) aktiveret, kan du ændre eller slette en nyoprettet fil under en af følgende betingelser:

Låseforsinkelse er aktiveret, og filen er stadig inden for sin låseforsinkelsesperiode.
Manuel lås er aktiveret ( QuTS hero ) eller låseforsinkelse er deaktiveret (QES), og du har endnu ikke manuelt låst filen.

Låseforsinkelse

Hvis låseforsinkelse er aktiveret, kan en fil stadig ændres eller slettes, hvis låseforsinkelsesperioden ikke er passeret. Bemærk dog, at låseforsinkelsesperioden nulstilles hver gang du ændrer filen inden for dens nuværende låseforsinkelsesperiode.

For eksempel, hvis du har konfigureret en låseforsinkelsesperiode på 5 minutter, og du opretter en fil kl. 10:00 og ikke foretager yderligere ændringer, vil filen blive låst kl. 10:05. Hvis du dog foretager en ændring inden for de første 5 minutter, lad os sige kl. 10:03, så vil filen blive låst kl. 10:08.

Bemærk

Den tid en fil faktisk bliver låst kan variere fra den angivne tid med +/- 1 minut.

Konfigurering af låseforsinkelse i QuTS hero

Bemærk

Du kan kun konfigurere WORM-indstillinger under oprettelse af delt mappe.
For detaljer om oprettelse af delt mappe, se "Oprettelse af en delt mappe" i QuTS hero Brugervejledning .

I Opret delt mappe guiden vinduet, gå til Lager Indstillinger.
Under WORM Indstillinger, vælg WORM.
Under Låseindstilling, vælg Lås automatisk efter denne mængde tid.
Angiv låseforsinkelsesperioden.
Den maksimale låseforsinkelse er 168 timer og 59 minutter.

Konfigurering af låseforsinkelse i QES

Bemærk

Du kan kun konfigurere WORM-indstillinger under oprettelse af delt mappe.
For detaljer om oprettelse af delt mappe, se "Oprettelse af en delt mappe" i QES Brugervejledning .

I Opret en delt mappe vinduet, gå til WORM Indstillinger.
Vælg WORM.
Vælg Låseforsinkelse.
Angiv låseforsinkelsesperioden.
Den maksimale låseforsinkelse er 168 timer og 59 minutter.

Manuel Lås

Du kan også konfigurere filer og undermapper i den delte mappe til manuelt at blive låst fra en fjernklient. I dette tilfælde kan en fil eller undermappe ændres og slettes når som helst, så længe du endnu ikke har låst den manuelt.

Konfigurering af manuel lås i QuTS hero

Bemærk

Du kan kun konfigurere WORM-indstillinger under oprettelsen af den delte mappe.
For detaljer om oprettelse af delt mappe, se "Oprettelse af en delt mappe" i QuTS hero Brugervejledning .

I vinduet Opret delt mappe guiden, gå til Lager Indstillinger.
Under WORM Indstillinger, vælg WORM.
Under Låseindstilling, vælg Lås manuelt (sæt filrettighed til skrivebeskyttet).

Konfigurering af manuel lås i QES

Bemærk

Du kan kun konfigurere WORM-indstillinger under oprettelsen af den delte mappe.
For detaljer om oprettelse af delt mappe, se "Oprettelse af en delt mappe" i QES Brugervejledning .

I vinduet Opret en delt mappe , gå til WORM Indstillinger.
Vælg WORM.
Fravælg Låseforsinkelse.
Når låseforsinkelse er deaktiveret, er manuel lås som standard aktiveret.

Manuel låsning af en fil eller mappe fra Windows Stifinder

I Windows, åbn Stifinder.
Gå til filen eller mappen, du ønsker at låse.
Højreklik på filen eller mappen og vælg Egenskaber.
Gå til Generelt fanebladet.
Ved siden af Attributter, vælg Skrivebeskyttet.
Klik på Anvend.

Manuel låsning af en fil eller mappe fra Linux

I Linux, åbn en terminal.
Gå til overmappen for filen eller mappen, du ønsker at låse.
Indtast følgende kommando for at ændre fil- eller mappe tilladelserne til skrivebeskyttet:
```
chmod -R 444 [fil_eller_mappenavn]
```
For eksempel, hvis du ønsker at låse en mappe, og mappenavnet er "RO01/", indtast "chmod -R 444 RO01/".

Yderligere læsning

How does WORM retention period count in QuTS Hero and QES?

Was this article helpful?

Yes. No.

33% of people think it helps.

Please tell us how this article can be improved:

The article is missing important information
The article's solutions do not work
The article is too complicated
The article contains incorrect information
The article is out-of-date

If you want to provide additional feedback, please include it below.

Lager

Netværk

Udvidelsestilbehør

Overvågning

NAS

Netværk

Overvågning

Applicable Products

Root Cause

Lock Delay

Manual Lock

Further Reading

Gældende produkter

Rodårsag

Låseforsinkelse

Manuel Lås

Yderligere læsning

Choose Your Country or Region

Asia

Europe

America