Important Notes

• To add the router to the QuWAN network, users must bind their QNAP ID in the QuWAN Settings page or log in to QuRouter with their QNAP ID.
  • QuWAN -> QuWAN Settings -> Log in with QNAP ID
• 

New Features

• Added support for IPv6 in WAN, VLAN, and static route settings.
  • IPv6 in WAN
• 
  • IPv6 in VLAN
• 
  • IPv6 in Static Route
• 
• Added support for MTU in VLAN settings.
  • MTU on VLAN
• 
• Added the WAN IP attribute feature in QuWAN settings: Public IP, Behind NAT, Behind NAT (Device role - Hub or edge), Public IP (IPSec / IKE passthrough failure)
• Users can reset the local account and password by pressing the reset button for 5 seconds, and reset the router settings to default settings by pressing the reset button for 10 seconds.

Enhancements

• Modified several user interface strings and the user interface workflow in the QuRouter user interface.
• QuRouter prompts the users to specify a strong pre-shared key when configuring the VPN server settings.
• Added access and trunk mode description in the WAN & LAN Settings page.
  • Network -> WAN & LAN Settings -> LAN Settings
• 
• Users can specify the primary and secondary DNS IP address in two different fields when configuring the WAN port settings in the WAN & LAN Settings page.
  • Network -> WAN & LAN Settings -> WAN Settings
• 
• If there are no user accounts created in QuRouter, users are reminded to create a VPN user account in the QVPN User Management page when they access the QVPN Settings page in the QVPN Server section.
  • QVPN Servers -> QVPN Settings
• 

Fixed Issues

• Due to myQNAPcloud retry interval issues, users could not access the internet for 24 hours after enabling DDNS (MyDDNS) and changing the WAN IP address in QuRouter.
• QuRouter would allow users to enter an MTU value less than 576 bytes in the WAN settings page.
• QuRouter would display an incoherent message if users added a VLAN in the VLAN & DHCP Server Service Settings page.
• Users were unable to access the internet via LAN trunk mode after adding the router to the QuWAN network.
• When the WAN connection is configured using PPPoE settings, QuRouter would not display the external FTP link in the USB Settings page.
• Users could not disable the "Local management via HTTP" setting when the device is in access point (AP) mode.
• Users could not perform firmware checks and update the firmware version using the "Live Update" function in the QuRouter Firmware page when the device is in access point (AP) mode.
• QuRouter would display a "TOKEN_IS_EXPIRED" error message when configuring the router WAN connection with PPPoE settings during the router initialization process.