TR-004U Specification

  1. TR-004U

    JBOD Connection Interface USB
    Main chip ハードウェアRAID付きマイクロプロセッサ
    Drive Bay 4 x 3.5インチ
    システムは HDD なしで出荷されます。
    HDD 互換性リストについては、https://www.qnap.com/compatibility/ をご覧ください
    Drive Compatibility 3.5インチ SATA 3Gb/s スロット (SATA 6Gb/sハードドライブをサポート、下位互換性あり、性能は3Gb/sに制限)
    2.5インチ SATA 3Gb/s スロット (SATA 6Gb/sハードドライブをサポート、下位互換性あり、性能は3Gb/sに制限)
    2.5インチ SATA 3Gb/s スロット (SATA 6Gb/s ソリッドステートハードドライブをサポート、下位互換性あり、性能は3Gb/sに制限)
    RAID グループには、一つのディスクタイプ(HDD または SSD)のみを使用できます。異なるタイプのディスクを一つの RAID グループに組み合わせることはサポートされていません。

    TR-004U は QDA-A2AR/QDA-A2MAR をサポートしていません。
    Hot-swappable
    USB 3.2 Gen 1 Port 1 x タイプ C USB 3.2 Gen 1 (USB 3.2 Gen 1)
    Form Factor 1U ショートデプスラックマウント
    Dimensions (HxWxD) 44 × 439 × 291 mm
    電源ユニットのイヤーフックと突出部を除く。
    Weight (Net) 4.77 kg
    Weight (Gross) 5.67 kg
    Operating Temperature 0 - 40°C (32°F - 104°F)
    Storage Temperature -20 - 70°C (-4°F - 158°F)
    Relative Humidity 5~95% RH 結露なきこと、湿球温度: 27℃ (80.6°F)
    Power Supply Unit オープンフレーム 100W、入力: 100V-240V ~ / 3.5A、50Hz-60Hz
    Power Consumption: HDD Sleep Mode 4.79 W
    Power Consumption: Operating Mode, Typical 18.9 W
    ドライブを全部取り付けた状態でテスト
    Fan 2 x 40mm、12VDC
    System Warning ブザー
    Kensington Security Slot
    QTS / QuTS hero
    Windows
    Ubuntu
    Mac
    Used as Hardware RAID (DAS)
    Standard Warranty 3
    RAID 10
    RAID 5+ Spare
    RAID 5
    RAID 1
    RAID 0
    JBOD
    Single Disk
    注:システムの性能と安定性を維持するため、QNAPメモリモジュールのみを使用してください。2つ以上のメモリスロットを持つNASデバイスの場合は、同じ仕様のQNAPモジュールを使用し、ハードウェアのユーザーマニュアルを参照して互換性のあるQNAPメモリモジュールを取り付けてください。
    警告:サポートされていないモジュールを使用すると、性能低下やエラーの発生、あるいはオペレーティングシステムが起動しないなどの問題が生じることがあります。
    QNAPは、オリジナルがメーカー/サプライヤから入手できなくなった場合、部分的な部品またはアクセサリを交換する権利を留保します。いかなる交換品も、厳格な互換性および安定性ガイドラインを満たすようテストおよび検証され、オリジナルと同一の性能を提供します。
    The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
    製品の画像は例示のみの目的で、実際の製品とは異なる場合があります。モニタの差異により、サイト上に表示あされる製品のカラーも違って見える場合があります。
    設計と仕様は予告なく変更されることがあります。
System modes

Individual, JBOD, hardware RAID 0/1/5/10, Software control (Software control requires a QNAP NAS or Windows/macOS utility)

Note: QNAP recommends using only one disk type (HDD or SSD) in a RAID group.

Features
  1. RAID rebuild in RAID 1/5/10.
  2. System, fan, and drive failure monitoring with LED and audio alerts.
  3. System sleep during USB cable disconnection and host device hibernation* or shut down.
    *Some hosts may not be supported.
  4. The unused disk drives automatically become the hot spare ones for the RAID 1 and RAID 5 types.
Minimum system requirements

QNAP NAS or PC with a USB Type-A or Type-C port

Minimum operating system requirements
  1. QNAP NAS: QTS 4.3.6 (or later)
  2. Windows: Windows 8.1 (or later), Windows Server 2012 R2 (or later)
  3. Mac: macOS X 10.13 (or later)
System fan

5-speed automatic fan control

Software utility

Windows/macOS: QNAP External RAID Manager

Supported File Systems

NAS storage (EXT4), External hard drive (EXT3, EXT4, NTFS, FAT32, HFS+, and exFAT*)

* Purchase of an exFAT driver license from the License Center is required.

QTS Storage Management Features
  1. General & Extenal Storage Mode
    • Overview device, disks, and RAID info and status
    • Support for disk’s S.M.A.R.T. monitoring
    • Determine location of drives using LEDs and system speakers
    • External RAID software configuration
    • RAID rebuild - Hot spare disk configuration
    • RAID recovery
    • Firmware update
    • Format partition
    • Erase partition and device
  2. NAS Storage Mode
    • The storage pools and volumes in the expansion enclosures are configured via the QTS operating system.
    • Volume and LUN snapshots - Snapshot Manager
    • Snapshot Cloning - Snapshot Replica - Snapshot Vault
    • Support for Windows Previous Versions (CIFS/SMB)
Show more...
Software utility Features
  1. QNAP External RAID Manager
    • Overview device, disks, and RAID info and status
    • Support for disk’s S.M.A.R.T. monitoring
    • Determine location of drives using LEDs and system speakers
    • Desktop notifications for device alerts
    • External RAID software configuration
    • RAID rebuild - RAID rebuild speed customization
    • RAID recovery - Firmware update
    • Notifications when new firmware and application versions are available
    • System event logs for troubleshooting
    • Export event logs to .csv file

Note: Actual performance may vary depending on operating environment and other factors, such as RAID mode, RAID configuration, disk model and capacity.

Show more...
Note:
QTS does not support DRM content and some IPv6 services.
Some data encryption features may be unavailable because of country-specific legislative restrictions.
Some features may vary by model.
Designs and specifications are subject to change without notice.
TR-004U external RAID enclosure

TR-004U external RAID enclosure

Power cord x 1

Power cord x 1

USB 3.2 Gen 1 Type-C to Type-A connector cable

USB 3.2 Gen 1 Type-C to Type-A connector cable

Drive tray keys x 2

Drive tray keys x 2

USB cable clip x 1

USB cable clip x 1

Screws x 12 (for 2.5-inch drives)

Screws x 12 (for 2.5-inch drives)

Screws x 16 (for 3.5-inch drives)

Screws x 16 (for 3.5-inch drives)

Quick Installation Guide (QIG)

Quick Installation Guide (QIG)

Hanger x 2

Hanger x 2

Holder x 2

Holder x 2

オプショナルアクセサリ

製品に同梱されている拡張カード、電源アダプター、アクセサリーなどの付属品については、1年間の保証となります。

仕様を選択

      もっと見る 閉じる

      当ページを他の国/地域で見る:

      気軽にお問い合わせ! show inquiry button
      open menu
      back to top