Applicable Models

• HS-251+,S2
• QMiroPlus-201W
• Mustang-F100,Mustang-V100,Mustang-200-i7-1T-32G-R10,Mustang-200-i5-1T-32G-R10,Mustang-200-C-8G-R10,Mustang-200
• QBoat Sunny
• QGD-1600P,QGD-1600
• QGD-1602P,QGD-1602
• QGD-3014-16PT
• TS-453S Pro,TS-853S Pro
• TS-531P
• TS-216,TS-416
• TS-128A,TS-228A,TS-212P3,TS-130,D1 Rev-B
• TS-231P3,TS-431P3
• TS-231P2,TS-431P2
• TS-831X,TS-531X,TS-431X,TS-431X2,TS-431X3,TS-431KX
• TS-431XU,TS-831XU,TS-1231XU,TS-431XU-RP,TS-831XU-RP,TS-1231XU-RP,TS-431XeU
• TS-932X,TS-832X,TS-332X,TS-532X,TS-932PX,TS-832PX,TS-432X,TS-632X
• TS-432XU-RP,TS-432XU,TS-832XU-RP,TS-832XU,TS-1232XU-RP,TS-1232XU,TS-432PXU,TS-432PXU-RP,TS-832PXU,TS-832PXU-RP,TS-1232PXU,TS-1232PXU-RP
• TS-133,TS-233,TS-433,D4 Rev-C,TS-216G
• TS-1635
• TS-1635AX
• TS-435XeU
• TS-231+,TS-431+,TS-131P,TS-231P,TS-431P,TS-131K,TS-231K,TS-431K,D2,D4,D4 Rev-B
• TS-251,TS-451,TS-651,TS-851,TS-451S,TS-251+,TS-451+,TS-351,D2 Pro Rev-B,D4 Pro Rev-B
• TS-251A,TS-451A,D2 Pro,D4 Pro
• TS-251B
• TS-451DeU,TS-453DU,TS-453DU-RP,TS-853DU-RP,TS-1253DU-RP
• TS-451U
• TS-253 Pro,TS-453 Pro,TS-653 Pro,TS-853 Pro,TS-453mini,IS-453S
• TS-453Bmini,TS-253B,TS-453B,TS-653B,TS-453BT3,TS-253Be,TS-453Be
• TS-853BU,TS-853BU-RP,TS-1253BU,TS-1253BU-RP,TS-453BU,TS-453BU-RP
• HS-453DX,TBS-453DX,TS-251D,TS-253D,TS-653D,TS-453D,TS-451D,TS-453Dmini,TS-451D2
• TBS-453A,TS-253A,TS-453A,TS-653A,TS-853A,D6 Pro,D8 Pro
• TS-453U,TS-853U,TS-1253U,TS-453U-RP,TS-853U-RP,TS-1253U-RP,R4
• TVS-463,TVS-663,TVS-863,TVS-863+,TS-563,TS-963X,TS-963N
• TS-463U,TS-463U-RP,TS-863U,TS-863U-RP,TS-1263U,TS-1263U-RP,TS-463XU,TS-463XU-RP,TS-863XU,TS-863XU-RP,TS-1263XU,TS-1263XU-RP
• TS-564,HS-264,TBS-464,TS-262C,TS-462C,TS-264C,TS-464C,TS-364,TS-464,TS-664,TS-262,TS-462,TS-264,TS-464C2
• TS-464U,TS-464U-RP,TS-1264U-RP,TS-464eU,TS-864eU,TS-864eU-RP
• TVS-471,TVS-671,TVS-871,TVS-871T
• TVS-871U-RP,TVS-1271U-RP,TVS-471U-RP,TVS-471U,R8
• TVS-672N,TVS-872N,TVS-872X,TVS-672X,TVS-472X,TVS-472XT,TVS-672XT,TVS-872XT
• TVS-872XU,TVS-872XU-RP,TVS-1272XU-RP,TVS-1672XU-RP,TVS-2472XU-RP,TVS-972XU,TVS-972XU-RP
• TVS-473,TVS-673,TVS-873,TVS-473e,TVS-673e,TVS-873e
• TS-h973AX,TS-473A,TS-673A,TS-873A
• TS-873AU,TS-873AU-RP,TS-1273AU-RP,TS-1673AU-RP,TS-873AeU,TS-873AeU-RP
• TS-873U,TS-1273U,TS-1673U,TS-873U-RP,TS-1273U-RP,TS-1673U-RP
• TVS-675
• TVS-h875U,TVS-h875U-RP,TVS-h1275U-RP,TVS-h1675U-RP
• TS-1277,TS-877,TS-677,TS-1677X
• TS-877XU,TS-877XU-RP,TS-1277XU-RP,TS-1677XU-RP,TS-2477XU-RP,TS-977XU-RP,TS-977XU,TS-h1277XU-RP,TS-h977XU-RP,TS-h1677XU-RP,TS-h2477XU-RP
• TS-EC880 Pro,TS-EC1080 Pro,TVS-EC880,TVS-EC1080,TVS-EC1080+
• TS-EC880U,TS-EC1280U,TS-EC1680U,TS-EC2480U R2,TVS-EC1280U-SAS-RP R2,TVS-EC1580MU-SAS-RP R2,TVS-EC1680U-SAS-RP R2,TVS-EC2480U-SAS-RP R2,TS-EC2480U,TS-EC880U R2,TS-EC1280U R2,TS-EC1680U R2,TVS-EC1280U-SAS-RP,TVS-EC1580MU-SAS-RP,TVS-EC1680U-SAS-RP,TVS-EC2480U-SAS-RP,R12,R16,R24
• TVS-882T,TVS-1282T,TVS-682,TVS-882,TVS-1282,TVS-682T,TVS-1282T3,TVS-882BR,TVS-882BRT3
• TVS-882ST,TVS-882ST3
• TVS-1582TU
• TS-883XU,TS-883XU-RP,TS-1283XU-RP,TS-1683XU-RP,TS-983XU,TS-983XU-RP,TS-2483XU-RP,TS-h1283XU-RP,TS-h2483XU-RP,TS-h1683XU-RP
• TS-1685,TS-h886,TS-h686
• TES-3085U,TES-1885U,TS-1886XU-RP,TS-h1886XU-RP,TS-h1886XU-RP R2
• TS-2888X,TVS-h1688X,TVS-h1288X
• TS-h3088XU-RP
• TDS-16489U
• TS-h2490FU,TS-h1090FU
• TS-328,TS-428,TS-230,D2 Rev-B
• TS-551
• TS-473,TS-673,TS-873
• TVS-951X,TVS-951N
• GM-1000,TNS-h1083X,TNS-h1083X (A Side),TNS-h1083X (B Side)
• TS-i410X, TS-410E
• TS-253E,TS-453E
• TS-h1290FX
• TS-h987XU-RP,TS-h1887XU-RP,TS-h2287XU-RP,TS-h3087XU-RP
• TVS-h474,TVS-h674,TVS-h874,TVS-h874X,TVS-h674T,TVS-h874T
• TDS-h2489FU
• TS-1655, TS-855X
• TS-855eU, TS-855eU-RP
• TS-466C
• TS-AI642
• TBS-h574TX
• TS-h1277AXU-RP, TS-h1677AXU-RP, TS-h3077AFU
• TS-433eU

Important Notes

• If you are using an NVIDIA GPU card and have updated the firmware to QTS 5.2.1 (or their later versions), please update NVIDIA GPU Driver in the App Center.
• Due to certain compatibility issues, ARM-based NAS models are unable to run certain third-party applications in QTS 5.2.1. We recommend users of the following applications on an ARM-based NAS to wait until new versions of the applications are released before updating to QTS 5.2.1 or later:
• AhsayOBM (9.7.0.200)
• CloudBackoGo (9.7.2.0 or earlier)
• Qfinder Discovery Service uses UDP port 8097 for communication. To ensure the service functions properly, allow devices in your internal network to access port 8097 through your firewall before enabling the service. We recommend blocking external access to this port if your device permits external connections.

Security Updates

• Applied multiple security updates to further enhance system security.

New Features

System

• Starting from QTS 5.2.1, certain QTS NAS models now also support the QuTS hero operating system. After updating to QTS 5.2.1, you can switch to QuTS hero by reinitializing the NAS. Applicable NAS models: HS-264, TBS-464, TS-253E, TS-453E, TS-264, TS-364, TS-464, TS-464C2, TS-664, and TS-466C.

Control Panel

• Administrators can now edit the user ID (UID) of an administrator in Control Panel > Privilege > Users > Edit Account Profile.

Storage & Snapshots

• Storage & Snapshots now displays Qfiling-related storage information on shared folders that are configured as Qfiling space recycling folders.

Enhancement

SSH

• Improved SSH connectivity and added support for additional encryption algorithms such as ECDSA and ED25519. To give users more transition time, we have also temporarily reinstated support for umac-64@openssh.com and hmac-sha1; however, we highly recommend users to switch to other algorithms as soon as possible to ensure greater security.

Control Panel

• Upgraded Apache HTTP Server to version 2.4.62 for improved security.
• Improved the shared folder name sorting method in Control Panel for easier browsing.

Domain Security

• Enhanced LDAP client functionality by providing "one" and "subtree" as search scope options.

Storage & Snapshots

• Improved the write performance of the read-only cache type.
• Enhanced the "Time since last snapshot" UI design in Storage & Snapshots > Data Protection > Snapshot.

File Station

• Users can update to File Station 5 by opening App Center and clicking update on the File Station 5 app icon.
• File Station can now access your Personal Vault in myQNAPcloud Storage. Note: You will need to provide your Personal Vault's encryption key.
• File Station now displays information about Qfiling space recycling tasks for folders.
• Improved the loading time when opening video files.
  • Since File Station can now be manually updated in App Center starting from QTS 5.2.1, you can read detailed release information for the application at: https://www.qnap.com/en/app_releasenotes/list.php?app_choose=FileStation5

Fixed Issues

• Fixed an issue for some users where after installing certain memory modules that were not on the compatibility list, the desktop screen would be stuck on "Loading..." after login.
• Fixed an issue where non-root users could not access their home folder on the NAS via SSH.
• Resolved an issue where under certain circumstances some users could not access a folder in File Station even though they had the permissions and could access the folder via a network protocol.
• Addressed an issue in Notification Center where when creating or editing an alert notification rule, configuring the setting "Notify me when the number of log entries generated per minute exceeds this threshold" would cause unexpected issues.
• Resolved an issue where after creating an LDAP user with the setting "User must change the password at first logon" enabled, the LDAP user could not successfully change the password after logging in.
• Fixed an issue where under certain conditions, restarting the NAS might sometimes cause the default gateway to become disconnected.
• Fixed an issue for users in certain time zones, where the NAS would display an incorrect time after the user chose to automatically synchronize the NAS with a time server during NAS initialization.
• In Storage & Snapshots, the "Data Protection > Snapshot" page now shows the correct snapshot protection status for a storage pool even when the storage pool contains a storage space that does not support snapshots.
• Fixed an issue where creating a virtual switch after port trunking had been set up might occasionally cause the NAS to become inaccessible.
• Fixed an issue where Qsync Client could not access the NAS after a user disabled the recycle bin function in Control Panel.
• Fixed an issue in the myQNAPcloud web interface where devices in the Device Management page that have firmware updates available sometimes did not display the correct update version number.
• Resolved an issue on certain NAS models with HDMI ports where some users could not start HybridDesk Station properly after a firmware update.
• Fixed an issue on certain NAS models where users were able to configure USB One Touch Copy in HBS even though the NAS did not have a USB One Touch Copy button.
• Improved the folder permission mechanism for domain users.
• Resolved an issue where under certain circumstances the system would incorrectly log drive error messages for an SES device on a JBOD enclosure.
• Fixed an issue on certain NAS models where "System Status > Hardware Information" might incorrectly indicate that a healthy redundant power supply unit had failed.
• Fixed an issue in Control Panel where a user's access to Microsoft Networking service could not be successfully disabled.
• Resolved an issue where Helpdesk sometimes could not generate a support ticket if the log size was too large, even when users selected "I am allowing QNAP support to access my system logs" instead of uploading a file.
• Addressed an issue where when creating a new user in Control Panel, the email message for the setting "Send a notification email to the newly created user" would contain some characters in Traditional Chinese even though the system language was set to Simplified Chinese.
• The system now alerts users that they cannot use a system reserved name when trying to create a new folder.
• Resolved an issue where after dragging the "Storage" tab from the Dashboard to the desktop, all tabs that had been dragged to the desktop would no longer display correctly after logging in again.
• Fixed an issue on the login screen where the checkbox setting "Keep me logged in" would be skipped when pressing the tab key to move between elements on the webpage.
• Fixed an issue in QuLog Center where the "Local Device > Access Log" page did not correctly display the source IP address when a user logged in via SSH.
• Fixed an issue where users could not open QVPN Service under certain circumstances.
• Resolved an issue where LDAP users could not change their own passwords.
• Addressed an issue in Storage & Snapshots where if a volume name contained spaces, the volume's snapshot vault would not include the full volume name in its vault name.
• Fixed an issue where if a volume's capacity was too large, there was a chance that a user could not access the @Recently-Snapshot folder in File Station.
• Improved the stability of iSCSI connections.
• Resolved an issue where iSCSI service occasionally remained active even though users had disabled the service.
• Improved the LUN access permission mechanism.
• Fixed an issue where users could not see previous versions of a snapshot when accessing via Windows Samba.
• Fixed a rare issue where after a Snapshot Replica job finished successfully, the newly transferred snapshots were not visible in File Station on the destination NAS.
• Fixed an issue in iSCSI & Fibre Channel where after a system restart, a target's checksum setting might change, causing possible connection issues.
• Resolved an issue where users could not modify via Samba the file attributes of any files copied from the NAS to a USB drive that was formatted in NTFS or FAT32.
• Fixed an issue where when the NAS became disconnected from the internet, it might lose its system default gateway settings.
• Resolved an issue on the TVS-h874 where Network & Virtual Switch did not correctly display the active ports on a QM2-2P410G2T expansion card.
• Fixed an issue where after failing to move files from an external drive to a shared folder due to lack of free space, the files might be deleted from the external drive.
• Resolved an issue in File Station where share links that were set to "Always Valid" sometimes became invalid after several days.
• Fixed an issue in HBS where some users could not create a storage space with a CentOS rsync server, and the "Test Connection" and "Speed Test" functions would unexpectedly return a "Permission denied" message.
• Addressed an issue where some users could not use VLC for iOS to play video files on the NAS via SMB.

Other Changes

Network & Virtual Switch

• Starting from QTS 5.2.1, IPv6 is disabled by default in Network & Virtual Switch.

Gældende modeller

• HS-251+,S2
• QMiroPlus-201W
• Mustang-F100,Mustang-V100,Mustang-200-i7-1T-32G-R10,Mustang-200-i5-1T-32G-R10,Mustang-200-C-8G-R10,Mustang-200
• QBoat Sunny
• QGD-1600P,QGD-1600
• QGD-1602P,QGD-1602
• QGD-3014-16PT
• TS-453S Pro,TS-853S Pro
• TS-531P
• TS-216,TS-416
• TS-128A,TS-228A,TS-212P3,TS-130,D1 Rev-B
• TS-231P3,TS-431P3
• TS-231P2,TS-431P2
• TS-831X,TS-531X,TS-431X,TS-431X2,TS-431X3,TS-431KX
• TS-431XU,TS-831XU,TS-1231XU,TS-431XU-RP,TS-831XU-RP,TS-1231XU-RP,TS-431XeU
• TS-932X,TS-832X,TS-332X,TS-532X,TS-932PX,TS-832PX,TS-432X,TS-632X
• TS-432XU-RP,TS-432XU,TS-832XU-RP,TS-832XU,TS-1232XU-RP,TS-1232XU,TS-432PXU,TS-432PXU-RP,TS-832PXU,TS-832PXU-RP,TS-1232PXU,TS-1232PXU-RP
• TS-133,TS-233,TS-433,D4 Rev-C,TS-216G
• TS-1635
• TS-1635AX
• TS-435XeU
• TS-231+,TS-431+,TS-131P,TS-231P,TS-431P,TS-131K,TS-231K,TS-431K,D2,D4,D4 Rev-B
• TS-251,TS-451,TS-651,TS-851,TS-451S,TS-251+,TS-451+,TS-351,D2 Pro Rev-B,D4 Pro Rev-B
• TS-251A,TS-451A,D2 Pro,D4 Pro
• TS-251B
• TS-451DeU,TS-453DU,TS-453DU-RP,TS-853DU-RP,TS-1253DU-RP
• TS-451U
• TS-253 Pro,TS-453 Pro,TS-653 Pro,TS-853 Pro,TS-453mini,IS-453S
• TS-453Bmini,TS-253B,TS-453B,TS-653B,TS-453BT3,TS-253Be,TS-453Be
• TS-853BU,TS-853BU-RP,TS-1253BU,TS-1253BU-RP,TS-453BU,TS-453BU-RP
• HS-453DX,TBS-453DX,TS-251D,TS-253D,TS-653D,TS-453D,TS-451D,TS-453Dmini,TS-451D2
• TBS-453A,TS-253A,TS-453A,TS-653A,TS-853A,D6 Pro,D8 Pro
• TS-453U,TS-853U,TS-1253U,TS-453U-RP,TS-853U-RP,TS-1253U-RP,R4
• TVS-463,TVS-663,TVS-863,TVS-863+,TS-563,TS-963X,TS-963N
• TS-463U,TS-463U-RP,TS-863U,TS-863U-RP,TS-1263U,TS-1263U-RP,TS-463XU,TS-463XU-RP,TS-863XU,TS-863XU-RP,TS-1263XU,TS-1263XU-RP
• TS-564,HS-264,TBS-464,TS-262C,TS-462C,TS-264C,TS-464C,TS-364,TS-464,TS-664,TS-262,TS-462,TS-264,TS-464C2
• TS-464U,TS-464U-RP,TS-1264U-RP,TS-464eU,TS-864eU,TS-864eU-RP
• TVS-471,TVS-671,TVS-871,TVS-871T
• TVS-871U-RP,TVS-1271U-RP,TVS-471U-RP,TVS-471U,R8
• TVS-672N,TVS-872N,TVS-872X,TVS-672X,TVS-472X,TVS-472XT,TVS-672XT,TVS-872XT
• TVS-872XU,TVS-872XU-RP,TVS-1272XU-RP,TVS-1672XU-RP,TVS-2472XU-RP,TVS-972XU,TVS-972XU-RP
• TVS-473,TVS-673,TVS-873,TVS-473e,TVS-673e,TVS-873e
• TS-h973AX,TS-473A,TS-673A,TS-873A
• TS-873AU,TS-873AU-RP,TS-1273AU-RP,TS-1673AU-RP,TS-873AeU,TS-873AeU-RP
• TS-873U,TS-1273U,TS-1673U,TS-873U-RP,TS-1273U-RP,TS-1673U-RP
• TVS-675
• TVS-h875U,TVS-h875U-RP,TVS-h1275U-RP,TVS-h1675U-RP
• TS-1277,TS-877,TS-677,TS-1677X
• TS-877XU,TS-877XU-RP,TS-1277XU-RP,TS-1677XU-RP,TS-2477XU-RP,TS-977XU-RP,TS-977XU,TS-h1277XU-RP,TS-h977XU-RP,TS-h1677XU-RP,TS-h2477XU-RP
• TS-EC880 Pro,TS-EC1080 Pro,TVS-EC880,TVS-EC1080,TVS-EC1080+
• TS-EC880U,TS-EC1280U,TS-EC1680U,TS-EC2480U R2,TVS-EC1280U-SAS-RP R2,TVS-EC1580MU-SAS-RP R2,TVS-EC1680U-SAS-RP R2,TVS-EC2480U-SAS-RP R2,TS-EC2480U,TS-EC880U R2,TS-EC1280U R2,TS-EC1680U R2,TVS-EC1280U-SAS-RP,TVS-EC1580MU-SAS-RP,TVS-EC1680U-SAS-RP,TVS-EC2480U-SAS-RP,R12,R16,R24
• TVS-882T,TVS-1282T,TVS-682,TVS-882,TVS-1282,TVS-682T,TVS-1282T3,TVS-882BR,TVS-882BRT3
• TVS-882ST,TVS-882ST3
• TVS-1582TU
• TS-883XU,TS-883XU-RP,TS-1283XU-RP,TS-1683XU-RP,TS-983XU,TS-983XU-RP,TS-2483XU-RP,TS-h1283XU-RP,TS-h2483XU-RP,TS-h1683XU-RP
• TS-1685,TS-h886,TS-h686
• TES-3085U,TES-1885U,TS-1886XU-RP,TS-h1886XU-RP,TS-h1886XU-RP R2
• TS-2888X,TVS-h1688X,TVS-h1288X
• TS-h3088XU-RP
• TDS-16489U
• TS-h2490FU,TS-h1090FU
• TS-328,TS-428,TS-230,D2 Rev-B
• TS-551
• TS-473,TS-673,TS-873
• TVS-951X,TVS-951N
• GM-1000,TNS-h1083X,TNS-h1083X (A Side),TNS-h1083X (B Side)
• TS-i410X, TS-410E
• TS-253E,TS-453E
• TS-h1290FX
• TS-h987XU-RP,TS-h1887XU-RP,TS-h2287XU-RP,TS-h3087XU-RP
• TVS-h474,TVS-h674,TVS-h874,TVS-h874X,TVS-h674T,TVS-h874T
• TDS-h2489FU
• TS-1655, TS-855X
• TS-855eU, TS-855eU-RP
• TS-466C
• TS-AI642
• TBS-h574TX
• TS-h1277AXU-RP, TS-h1677AXU-RP, TS-h3077AFU
• TS-433eU

Vigtige bemærkninger

• Hvis du bruger et NVIDIA GPU-kort og har opdateret firmwaren til QTS 5.2.1 (eller deres nyere versioner), skal du opdatere NVIDIA GPU-driveren i App Center.
• På grund af visse kompatibilitetsproblemer er ARM-baserede NAS-modeller ikke i stand til at køre visse tredjepartsapplikationer i QTS 5.2.1. Vi anbefaler brugere af følgende applikationer på en ARM-baseret NAS at vente, indtil nye versioner af applikationerne er frigivet, før de opdaterer til QTS 5.2.1 eller nyere:
• AhsayOBM (9.7.0.200)
• CloudBackoGo (9.7.2.0 eller tidligere)
• Qfinder Discovery Service bruger UDP-port 8097 til kommunikation. For at sikre, at tjenesten fungerer korrekt, skal du give enheder i dit interne netværk adgang til port 8097 gennem din firewall, før du aktiverer tjenesten. Vi anbefaler at blokere ekstern adgang til denne port, hvis din enhed tillader eksterne forbindelser.

Sikkerhedsopdateringer

• Anvendt flere sikkerhedsopdateringer for yderligere at forbedre systemsikkerheden.

Nye funktioner

System

• Fra og med QTS 5.2.1 understøtter visse QTS NAS-modeller nu også QuTS hero-operativsystemet. Efter opdatering til QTS 5.2.1 kan du skifte til QuTS hero ved at geninitialisere NAS'en. Gældende NAS-modeller: HS-264, TBS-464, TS-253E, TS-453E, TS-264, TS-364, TS-464, TS-464C2, TS-664 og TS-466C.

Kontrolpanel

• Administratorer kan nu redigere bruger-id'et (UID) for en administrator i Kontrolpanel > Privilegium > Brugere > Rediger kontoprofil.

Opbevaring & Snapshots

• Storage & Snapshots viser nu Qfiling-relateret lagerinformation på delte mapper, der er konfigureret som Qfiling-pladsgenbrugsmapper.

Forbedring

SSH

• Forbedret SSH-forbindelse og tilføjet understøttelse af yderligere krypteringsalgoritmer såsom ECDSA og ED25519. For at give brugerne mere overgangstid, har vi også midlertidigt genoprettet understøttelse af umac-64@openssh.com og hmac-sha1; dog anbefaler vi stærkt brugere at skifte til andre algoritmer så hurtigt som muligt for at sikre større sikkerhed.

Kontrolpanel

• Opgraderet Apache HTTP Server til version 2.4.62 for forbedret sikkerhed.
• Forbedret sorteringsmetoden for delt mappenavn i kontrolpanelet for lettere browsing.

Domænesikkerhed

• Forbedret LDAP-klientfunktionalitet ved at give "én" og "undertræ" som søgeomfangsmuligheder.

Opbevaring & Snapshots

• Forbedret skriveydeevne for den skrivebeskyttede cache-type.
• Forbedret UI-designet "Tid siden sidste øjebliksbillede" i Lagring & Snapshots > Databeskyttelse > Snapshot.

File Station

• Brugere kan opdatere til File Station 5 ved at åbne App Center og klikke på opdater på File Station 5 app-ikonet.
• File Station kan nu få adgang til din personlige boks i myQNAPcloud Storage. Bemærk: Du skal angive din personlige boks krypteringsnøgle.
• File Station viser nu oplysninger om Qfiling-pladsgenbrugsopgaver for mapper.
• Forbedret indlæsningstiden ved åbning af videofiler.
  • Da File Station nu kan opdateres manuelt i App Center fra QTS 5.2.1, kan du læse detaljerede udgivelsesoplysninger for applikationen på: https://www.qnap.com/en/app_releasenotes/list.php?app_choose= FileStation5

Løstede problemer

• Rettede et problem for nogle brugere, hvor efter installation af visse hukommelsesmoduler, der ikke var på kompatibilitetslisten, ville skrivebordsskærmen sidde fast på "Indlæser..." efter login.
• Rettede et problem, hvor ikke-root-brugere ikke kunne få adgang til deres hjemmemappe på NAS'en via SSH.
• Løste et problem, hvor nogle brugere under visse omstændigheder ikke kunne få adgang til en mappe i File Station, selvom de havde tilladelserne og kunne få adgang til mappen via en netværksprotokol.
• Har løst et problem i Notifikationscenter, hvor konfiguration af indstillingen "Giv mig besked, når antallet af logposter genereret pr. minut overstiger denne tærskel" ville forårsage uventede problemer, når der oprettes eller redigeres en advarselsregel.
• Løste et problem, hvor efter oprettelse af en LDAP-bruger med indstillingen "Bruger skal ændre adgangskoden ved første login" aktiveret, kunne LDAP-brugeren ikke ændre adgangskoden efter at have logget ind.
• Rettede et problem, hvor genstart af NAS'en under visse betingelser kan medføre, at standardgatewayen afbrydes.
• Rettede et problem for brugere i visse tidszoner, hvor NAS'en ville vise en forkert tid, efter at brugeren valgte automatisk at synkronisere NAS'en med en tidsserver under NAS-initialisering.
• I Storage & Snapshots viser siden "Databeskyttelse > Snapshot" nu den korrekte snapshot-beskyttelsesstatus for en lagerpulje, selv når lagerpuljen indeholder en lagerplads, der ikke understøtter snapshots.
• Rettede et problem, hvor oprettelse af en virtuel switch, efter at porttrunking var blevet sat op, lejlighedsvis kunne få NAS'en til at blive utilgængelig.
• Rettede et problem, hvor Qsync Client ikke kunne få adgang til NAS'en, efter at en bruger deaktiverede papirkurvsfunktionen i kontrolpanelet.
• Rettede et problem i myQNAPcloud-webgrænsefladen, hvor enheder på siden Device Management, der har firmwareopdateringer til rådighed, nogle gange ikke viste det korrekte opdateringsversionsnummer.
• Løste et problem på visse NAS-modeller med HDMI-porte, hvor nogle brugere ikke kunne starte HybridDesk Station korrekt efter en firmwareopdatering.
• Rettede et problem på visse NAS-modeller, hvor brugere var i stand til at konfigurere USB One Touch Copy i HBS, selvom NAS'en ikke havde en USB One Touch Copy-knap.
• Forbedret mappetilladelsesmekanisme for domænebrugere.
• Løste et problem, hvor systemet under visse omstændigheder fejlagtigt loggede drevfejlmeddelelser for en SES-enhed på et JBOD-kabinet.
• Rettede et problem på visse NAS-modeller, hvor "Systemstatus > Hardwareoplysninger" forkert kunne indikere, at en sund redundant strømforsyningsenhed var fejlet.
• Rettede et problem i kontrolpanelet, hvor en brugers adgang til Microsoft Networking-tjenesten ikke kunne deaktiveres.
• Løste et problem, hvor Helpdesk nogle gange ikke kunne generere en supportbillet, hvis logstørrelsen var for stor, selv når brugere valgte "Jeg tillader QNAP-support at få adgang til mine systemlogfiler" i stedet for at uploade en fil.
• Løste et problem, hvor e-mail-meddelelsen for indstillingen "Send en notifikations-e-mail til den nyoprettede bruger" ved oprettelse af en ny bruger i kontrolpanelet ville indeholde nogle tegn på traditionel kinesisk, selvom systemsproget var indstillet til forenklet kinesisk.
• Systemet advarer nu brugere om, at de ikke kan bruge et system reserveret navn, når de forsøger at oprette en ny mappe.
• Løste et problem, hvor efter at have trukket fanen "Opbevaring" fra Dashboard til skrivebordet, ville alle faner, der var blevet trukket til skrivebordet, ikke længere vises korrekt efter at have logget ind igen.
• Rettede et problem på login-skærmen, hvor afkrydsningsfeltet "Hold mig logget på" blev sprunget over, når du trykker på tabulatortasten for at flytte mellem elementer på websiden.
• Rettede et problem i QuLog Center, hvor siden "Lokal enhed > Adgangslog" ikke viste kildens IP-adresse korrekt, da en bruger loggede på via SSH.
• Rettede et problem, hvor brugere ikke kunne åbne QVPN Service under visse omstændigheder.
• Løste et problem, hvor LDAP-brugere ikke kunne ændre deres egne adgangskoder.
• Løste et problem i Storage & Snapshots, hvor hvis et volumennavn indeholdt mellemrum, ville volumenets snapshot-boks ikke inkludere det fulde volumennavn i dets vault-navn.
• Rettede et problem, hvor hvis en volumens kapacitet var for stor, var der en chance for, at en bruger ikke kunne få adgang til mappen @Recently-Snapshot i File Station.
• Forbedret stabiliteten af ​​iSCSI-forbindelser.
• Løste et problem, hvor iSCSI-tjenesten lejlighedsvis forblev aktiv, selvom brugere havde deaktiveret tjenesten.
• Forbedret LUN-adgangstilladelsesmekanismen.
• Rettede et problem, hvor brugere ikke kunne se tidligere versioner af et snapshot, når de fik adgang via Windows Samba.
• Rettede et sjældent problem, hvor de nyligt overførte snapshots ikke var synlige i File Station på destinations-NAS'en, efter at et Snapshot Replica-job blev afsluttet.
• Rettede et problem i iSCSI & Fibre Channel, hvor efter en systemgenstart kan et måls kontrolsum-indstilling ændre sig, hvilket forårsager mulige forbindelsesproblemer.
• Løste et problem, hvor brugere ikke via Samba kunne ændre filattributterne for filer kopieret fra NAS'en til et USB-drev, der var formateret i NTFS eller FAT32.
• Rettede et problem, hvor når NAS'en blev afbrudt fra internettet, kunne den miste sine standardindstillinger for systemets gateway.
• Løste et problem på TVS-h874, hvor Network & Virtual Switch ikke viste de aktive porte korrekt på et QM2-2P410G2T udvidelseskort.
• Rettede et problem, hvor filerne muligvis blev slettet fra det eksterne drev efter undladelse af at flytte filer fra et eksternt drev til en delt mappe på grund af mangel på ledig plads.
• Løste et problem i File Station, hvor delelinks, der var indstillet til "Always Valid", nogle gange blev ugyldige efter flere dage.
• Rettede et problem i HBS, hvor nogle brugere ikke kunne oprette en lagerplads med en CentOS rsync-server, og funktionerne "Test forbindelse" og "Hastighedstest" ville uventet returnere en "Permission denied"-meddelelse.
• Løste et problem, hvor nogle brugere ikke kunne bruge VLC til iOS til at afspille videofiler på NAS'en via SMB.

Andre ændringer

Netværk og virtuel switch

• Fra QTS 5.2.1 er IPv6 deaktiveret som standard i Network & Virtual Switch.