Applicable Models

• HS-251+,S2
• QMiroPlus-201W
• Mustang-F100,Mustang-V100,Mustang-200-i7-1T-32G-R10,Mustang-200-i5-1T-32G-R10,Mustang-200-C-8G-R10,Mustang-200
• QBoat Sunny
• QGD-1600P, QGD-1600
• QGD-1602P
• QGD-3014-16PT
• TS-453S Pro,TS-853S Pro
• TS-216,TS-416
• TS-128A,TS-228A,TS-212P3,TS-130,D1 Rev-B
• TS-231P2,TS-431P2
• TS-831X,TS-531X,TS-431X,TS-431X2,TS-431X3,TS-431KX
• TS-932X,TS-832X,TS-332X,TS-532X,TS-932PX,TS-832PX
• TS-432XU-RP,TS-432XU,TS-832XU-RP,TS-832XU,TS-1232XU-RP,TS-1232XU,TS-432PXU,TS-432PXU-RP,TS-832PXU,TS-832PXU-RP,TS-1232PXU,TS-1232PXU-RP
• TS-133,TS-233,TS-433, D4 Rev-C
• TS-1635AX
• TS-435XeU
• TS-231+,TS-431+,TS-131P,TS-231P,TS-431P,TS-131K,TS-231K,TS-431K,D2,D4,D4 Rev-B
• TS-251,TS-451,TS-651,TS-851,TS-451S,TS-251+,TS-451+,TS-351,D2 Pro Rev-B,D4 Pro Rev-B
• TS-251A,TS-451A,D2 Pro,D4 Pro
• TS-251B
• TS-451DeU,TS-453DU,TS-453DU-RP,TS-853DU-RP,TS-1253DU-RP
• TS-451U
• TS-253 Pro,TS-453 Pro,TS-653 Pro,TS-853 Pro,TS-453mini,IS-453S
• TS-453Bmini,TS-253B,TS-453B,TS-653B,TS-253Be,TS-453Be,TS-453BT3
• TS-853BU,TS-853BU-RP,TS-1253BU,TS-1253BU-RP,TS-453BU,TS-453BU-RP
• HS-453DX,TBS-453DX,TS-251D,TS-253D,TS-653D,TS-453D,TS-451D,TS-453Dmini,TS-451D2
• TBS-453A,TS-253A,TS-453A,TS-653A,TS-853A,D6 Pro,D8 Pro
• TS-453U,TS-853U,TS-1253U,TS-453U-RP,TS-853U-RP,TS-1253U-RP,R4
• TVS-463,TVS-663,TVS-863,TVS-863+,TS-563,TS-963X,TS-963N
• TS-463U,TS-463U-RP,TS-863U,TS-863U-RP,TS-1263U,TS-1263U-RP,TS-463XU,TS-463XU-RP,TS-863XU,TS-863XU-RP,TS-1263XU,TS-1263XU-RP
• TS-564,HS-264,TBS-464,TS-262C,TS-462C,TS-264C,TS-464C,TS-364,TS-464,TS-664,TS-262,TS-462,TS-264
• TS-464U,TS-464U-RP,TS-1264U-RP,TS-464eU,TS-864eU,TS-864eU-RP
• TVS-471,TVS-671,TVS-871,TVS-871T
• TVS-871U-RP,TVS-1271U-RP,TVS-471U-RP,TVS-471U,R8
• TVS-672N,TVS-872N,TVS-872X,TVS-672X,TVS-472X,TVS-472XT,TVS-672XT,TVS-872XT
• TVS-872XU,TVS-872XU-RP,TVS-1272XU-RP,TVS-1672XU-RP,TVS-2472XU-RP,TVS-972XU,TVS-972XU-RP
• TVS-473,TVS-673,TVS-873,TVS-473e,TVS-673e,TVS-873e
• TS-h973AX,TS-473A,TS-673A,TS-873A
• TS-873AU,TS-873AU-RP,TS-1273AU-RP,TS-1673AU-RP,TS-873AeU,TS-873AeU-RP
• TS-873U,TS-1273U,TS-1673U,TS-873U-RP,TS-1273U-RP,TS-1673U-RP
• TVS-675
• TVS-h875U,TVS-h875U-RP,TVS-h1275U-RP,TVS-h1675U-RP
• TS-1277,TS-877,TS-677,TS-1677X
• TS-877XU,TS-877XU-RP,TS-1277XU-RP,TS-1677XU-RP,TS-2477XU-RP,TS-977XU-RP,TS-977XU,TS-h1277XU-RP,TS-h977XU-RP,TS-h1677XU-RP,TS-h2477XU-RP
• TS-EC880 Pro,TS-EC1080 Pro,TVS-EC880,TVS-EC1080,TVS-EC1080+
• TS-EC880U,TS-EC1280U,TS-EC1680U,TS-EC2480U R2,TVS-EC1280U-SAS-RP R2,TVS-EC1580MU-SAS-RP R2,TVS-EC1680U-SAS-RP R2,TVS-EC2480U-SAS-RP R2,TS-EC2480U,TS-EC880U R2,TS-EC1280U R2,TS-EC1680U R2,TVS-EC1280U-SAS-RP,TVS-EC1580MU-SAS-RP,TVS-EC1680U-SAS-RP,TVS-EC2480U-SAS-RP,R12,R16,R24
• TVS-682,TVS-882,TVS-1282,TVS-882BR,TVS-882T,TVS-1282T,TVS-682T,TVS-1282T3,TVS-882BRT3
• TVS-1582TU
• TS-883XU,TS-883XU-RP,TS-1283XU-RP,TS-1683XU-RP,TS-983XU,TS-983XU-RP,TS-2483XU-RP,TS-h1283XU-RP,TS-h2483XU-RP,TS-h1683XU-RP
• TS-1685,TS-h886,TS-h686
• TES-3085U,TES-1885U,TS-1886XU-RP,TS-h1886XU-RP,TS-h1886XU-RP R2
• TS-2888X,TVS-h1688X,TVS-h1288X
• TS-h3088XU-RP
• TDS-16489U
• TS-h2490FU,TS-h1090FU
• TS-328,TS-428,TS-230,D2 Rev-B
• TS-551
• TS-473,TS-673,TS-873
• TVS-951X,TVS-951N
• GM-1000,TNS-h1083X,TNS-h1083X (A Side),TNS-h1083X (B Side)
• TS-i410X, TS-410E
• TS-253E,TS-453E
• TS-h1290FX
• TVS-882ST,TVS-882ST3
• TS-h987XU-RP,TS-h1887XU-RP,TS-h2287XU-RP,TS-h3087XU-RP
• TVS-h474,TVS-h674,TVS-h874, TVS-h874X
• TS-1655, TS-855X
• TDS-h2489FU
• TS-855eU, TS-855eU-RP
• TS-466C
• TS-AI642
• TBS-h574TX
• TS-h1277AXU-RP, TS-h1677AXU-RP, TS-h3077AFU

Important Notes

• Apple recently fixed an issue that caused macOS computers with an M1 or M2 CPU to occasionally disconnect from Thunderbolt 4 connections. Please update your macOS to version 13.5.1 or later to ensure a stable connection with your QNAP Thunderbolt 4 devices.

Security Updates

• Applied multiple security updates to further enhance system security.

Enhancement

Storage & Snapshots

• By default, disable the "EPC feature" for specific SATA drives that exhibit an increase in "Load Cycle Count" even when Standby mode is disabled.

Fixed Issues

• QuLog Center now records log messages for scheduled restarts.
• Fixed an issue where Storage & Snapshots did not correctly display disk slot information on the IS-453s.
• QuLog Center now records log messages when snapshots exceeding their retention period are automatically deleted.
• Fixed an issue where some users could not open Microsoft Office files via SMB if those files had an alternate data stream (ADS).
• Resolved an issue in HybridMount where uploading a file from a PC file manager to a remote mount via Samba would cause the file modification time to be updated.
• Improved file upload speeds.
• Resolved an issue where after configuring a one-time power schedule, opening the "Application Management" panel in Qboost would cause the desktop browser page to stop responding.
• Resolved an issue where a Snapshot Replica job would fail to log in to the remote NAS after a user changed the SSH port of the remote NAS and then restarted the remote NAS.
• Fixed an issue where if a local NAS account username was identical to a domain account username, after changing the password of the local NAS account, the user could not use the new password to log in to the NAS via Samba.
• Fixed an issue where a user configuring 2-step verification could not view the security key clearly if the interface language was set to German.
• Improved the special permission mechanism for shared folders.
• Addressed an issue where under certain rare conditions DA Drive Analyzer would fail to upload disk analysis data.
• Fixed an issue in Resource Monitor > Storage Resource > Storage Space, where under certain conditions an incorrect value would be displayed under "Other".
• Improved the keyword filter exclusion mechanism in Notification Center notification rules.
• Fixed an issue in Notification Center where an alert notification rule created from an existing event log might fail to apply as expected if the keyword filters in the rule were too long.
• Resolved an issue for some users where after updating the firmware, shutting down the NAS would result in a restart.
• Improved storage performance by optimizing temporary file management.
• Addressed an issue in Resource Monitor > Storage Resource where the "Volume/LUN Activity" page would display the same activity between two volumes or LUNs even though one of the volumes or LUNs' parent storage pools was offline.
• Fixed an issue on NAS models with HDMI output where after connecting the NAS to an HDMI device and installing HybridDesk Station, the NAS would stop responding after a restart.
• Fixed an issue in Notification Center where a notification rule would fail to send email notifications from certain SMTP servers if the setting "Send email as plain text" was enabled.
• Fixed an issue where after updating the firmware on a TL-R400S JBOD enclosure, storage pools on the enclosure would enter an "Error" status.
• Resolved an issue in Storage & Snapshots where after running a disk test that resulted in a read failure, the disk health summary page occasionally did not display the correct warning description.
• Addressed an issue where under rare conditions File Station could not create a share link for a file or folder.
• Fixed an issue in File Station where certain table columns in the Background Task window were incorrectly named and could not be hidden.
• Storage & Snapshots now correctly displays the disk mode for SSDs as "Active" or "Standby" (previously "Active (Spinning)" or "Standby (Spindown)").
• Fixed a Hungarian translation issue on the desktop dashboard.
• Fixed a rare problem where under certain conditions File Station disappeared from Main Menu.
• Improved the file access permission mechanism for folders with symbolic links.
• Fixed an issue where QuLog Center recorded multiple logs for each failed RADIUS user login attempt.
• Resolved an issue where the system might not function normally if after a firmware update, the user manually shut down the NAS, removed a disk from an existing RAID group, and then started the NAS again.
• Fixed an issue where if a storage pool's resync priority was set to "Resync First", and "Share my analysis data with QNAP" was enabled in Storage & Snapshots > Global Settings > Disk Health, whenever the system finished resyncing it would fail to generate a corresponding log.
• Addressed an issue on the TS-1635AX where after shutting down the NAS from the desktop, the NAS would automatically start again.
• Resolved an issue in Storage & Snapshots where a disk's SED status was inconsistent between the "Overview" page and the "Disks/VJBOD > Disks" page.
• Improved the stability of NTFS ADS metadata after a NAS restart.
• Fixed a Danish translation issue in QuFTP Service.
• Resolved an issue where some users could not connect to an iSCSI LUN from Ubuntu if CHAP authentication was enabled.
• Fixed an issue for some users where after a firmware update, SATA M.2 SSDs on the QM2-2S-220A expansion card could not wake up from standby mode.
• Resolved an issue in QuLog Center where when grouping log entries by date, some entries would be grouped under the wrong date.
• Fixed an issue where the NAS would stop responding for some users after they connected the NAS to a Fibre Channel switch.
• Resolved a rare issue for some users where when searching files in a NAS shared folder using Windows File Explorer, the search results might display incorrect file creation and modification dates.
• Resolved an issue where when searching NAS files and folders using Windows File Explorer, empty folders in the search results could not be opened.
• Fixed an issue on the TS-431K where if the NAS contained a RAID 5 group, after restarting the NAS there was a chance that users could not connect to the NAS.
• Addressed an issue on NAS models with dual Thunderbolt ports where after removing an installed Thunderbolt host bus adapter, Mac computers could no longer connect to the NAS via Thunderbolt.
• Resolved an issue for some users where file transfers via SMB could sometimes fail to transfer all files when hidden files were included.

Gældende modeller

• HS-251+,S2
• QMiroPlus-201W
• Mustang-F100,Mustang-V100,Mustang-200-i7-1T-32G-R10,Mustang-200-i5-1T-32G-R10,Mustang-200-C-8G-R10,Mustang-200
• QBoat Sunny
• QGD-1600P, QGD-1600
• QGD-1602P
• QGD-3014-16PT
• TS-453S Pro,TS-853S Pro
• TS-216,TS-416
• TS-128A,TS-228A,TS-212P3,TS-130,D1 Rev-B
• TS-231P2,TS-431P2
• TS-831X,TS-531X,TS-431X,TS-431X2,TS-431X3,TS-431KX
• TS-932X,TS-832X,TS-332X,TS-532X,TS-932PX,TS-832PX
• TS-432XU-RP,TS-432XU,TS-832XU-RP,TS-832XU,TS-1232XU-RP,TS-1232XU,TS-432PXU,TS-432PXU-RP,TS-832PXU,TS-832PXU-RP,TS-1232PXU,TS-1232PXU-RP
• TS-133,TS-233,TS-433, D4 Rev-C
• TS-1635AX
• TS-435XeU
• TS-231+,TS-431+,TS-131P,TS-231P,TS-431P,TS-131K,TS-231K,TS-431K,D2,D4,D4 Rev-B
• TS-251,TS-451,TS-651,TS-851,TS-451S,TS-251+,TS-451+,TS-351,D2 Pro Rev-B,D4 Pro Rev-B
• TS-251A,TS-451A,D2 Pro,D4 Pro
• TS-251B
• TS-451DeU,TS-453DU,TS-453DU-RP,TS-853DU-RP,TS-1253DU-RP
• TS-451U
• TS-253 Pro,TS-453 Pro,TS-653 Pro,TS-853 Pro,TS-453mini,IS-453S
• TS-453Bmini,TS-253B,TS-453B,TS-653B,TS-253Be,TS-453Be,TS-453BT3
• TS-853BU,TS-853BU-RP,TS-1253BU,TS-1253BU-RP,TS-453BU,TS-453BU-RP
• HS-453DX,TBS-453DX,TS-251D,TS-253D,TS-653D,TS-453D,TS-451D,TS-453Dmini,TS-451D2
• TBS-453A,TS-253A,TS-453A,TS-653A,TS-853A,D6 Pro,D8 Pro
• TS-453U,TS-853U,TS-1253U,TS-453U-RP,TS-853U-RP,TS-1253U-RP,R4
• TVS-463,TVS-663,TVS-863,TVS-863+,TS-563,TS-963X,TS-963N
• TS-463U,TS-463U-RP,TS-863U,TS-863U-RP,TS-1263U,TS-1263U-RP,TS-463XU,TS-463XU-RP,TS-863XU,TS-863XU-RP,TS-1263XU,TS-1263XU-RP
• TS-564,HS-264,TBS-464,TS-262C,TS-462C,TS-264C,TS-464C,TS-364,TS-464,TS-664,TS-262,TS-462,TS-264
• TS-464U,TS-464U-RP,TS-1264U-RP,TS-464eU,TS-864eU,TS-864eU-RP
• TVS-471,TVS-671,TVS-871,TVS-871T
• TVS-871U-RP,TVS-1271U-RP,TVS-471U-RP,TVS-471U,R8
• TVS-672N,TVS-872N,TVS-872X,TVS-672X,TVS-472X,TVS-472XT,TVS-672XT,TVS-872XT
• TVS-872XU,TVS-872XU-RP,TVS-1272XU-RP,TVS-1672XU-RP,TVS-2472XU-RP,TVS-972XU,TVS-972XU-RP
• TVS-473,TVS-673,TVS-873,TVS-473e,TVS-673e,TVS-873e
• TS-h973AX,TS-473A,TS-673A,TS-873A
• TS-873AU,TS-873AU-RP,TS-1273AU-RP,TS-1673AU-RP,TS-873AeU,TS-873AeU-RP
• TS-873U,TS-1273U,TS-1673U,TS-873U-RP,TS-1273U-RP,TS-1673U-RP
• TVS-675
• TVS-h875U,TVS-h875U-RP,TVS-h1275U-RP,TVS-h1675U-RP
• TS-1277,TS-877,TS-677,TS-1677X
• TS-877XU,TS-877XU-RP,TS-1277XU-RP,TS-1677XU-RP,TS-2477XU-RP,TS-977XU-RP,TS-977XU,TS-h1277XU-RP,TS-h977XU-RP,TS-h1677XU-RP,TS-h2477XU-RP
• TS-EC880 Pro,TS-EC1080 Pro,TVS-EC880,TVS-EC1080,TVS-EC1080+
• TS-EC880U,TS-EC1280U,TS-EC1680U,TS-EC2480U R2,TVS-EC1280U-SAS-RP R2,TVS-EC1580MU-SAS-RP R2,TVS-EC1680U-SAS-RP R2,TVS-EC2480U-SAS-RP R2,TS-EC2480U,TS-EC880U R2,TS-EC1280U R2,TS-EC1680U R2,TVS-EC1280U-SAS-RP,TVS-EC1580MU-SAS-RP,TVS-EC1680U-SAS-RP,TVS-EC2480U-SAS-RP,R12,R16,R24
• TVS-682,TVS-882,TVS-1282,TVS-882BR,TVS-882T,TVS-1282T,TVS-682T,TVS-1282T3,TVS-882BRT3
• TVS-1582TU
• TS-883XU,TS-883XU-RP,TS-1283XU-RP,TS-1683XU-RP,TS-983XU,TS-983XU-RP,TS-2483XU-RP,TS-h1283XU-RP,TS-h2483XU-RP,TS-h1683XU-RP
• TS-1685,TS-h886,TS-h686
• TES-3085U,TES-1885U,TS-1886XU-RP,TS-h1886XU-RP,TS-h1886XU-RP R2
• TS-2888X,TVS-h1688X,TVS-h1288X
• TS-h3088XU-RP
• TDS-16489U
• TS-h2490FU,TS-h1090FU
• TS-328,TS-428,TS-230,D2 Rev-B
• TS-551
• TS-473,TS-673,TS-873
• TVS-951X,TVS-951N
• GM-1000,TNS-h1083X,TNS-h1083X (A Side),TNS-h1083X (B Side)
• TS-i410X, TS-410E
• TS-253E,TS-453E
• TS-h1290FX
• TVS-882ST,TVS-882ST3
• TS-h987XU-RP,TS-h1887XU-RP,TS-h2287XU-RP,TS-h3087XU-RP
• TVS-h474,TVS-h674,TVS-h874, TVS-h874X
• TS-1655, TS-855X
• TDS-h2489FU
• TS-855eU, TS-855eU-RP
• TS-466C
• TS-AI642
• TBS-h574TX
• TS-h1277AXU-RP, TS-h1677AXU-RP, TS-h3077AFU

Vigtige bemærkninger

• Apple løste for nylig et problem, der fik macOS-computere med en M1- eller M2-CPU til lejlighedsvis at afbryde forbindelsen fra Thunderbolt 4-forbindelser. Opdater venligst din macOS til version 13.5.1 eller nyere for at sikre en stabil forbindelse med dine QNAP Thunderbolt 4-enheder.

Sikkerhedsopdateringer

• Anvendt flere sikkerhedsopdateringer for yderligere at forbedre systemsikkerheden.

Forbedring

Opbevaring & Snapshots

• Som standard deaktiveres "EPC-funktionen" for specifikke SATA-drev, der udviser en stigning i "Load Cycle Count", selv når Standby-tilstand er deaktiveret.

Løstede problemer

• QuLog Center registrerer nu logmeddelelser til planlagte genstarter.
• Rettede et problem, hvor Storage & Snapshots ikke viste diskslotoplysninger korrekt på IS-453s.
• QuLog Center registrerer nu logmeddelelser, når øjebliksbilleder, der overskrider deres opbevaringsperiode, automatisk slettes.
• Rettede et problem, hvor nogle brugere ikke kunne åbne Microsoft Office-filer via SMB, hvis disse filer havde en alternativ datastrøm (ADS).
• Løste et problem i HybridMount, hvor upload af en fil fra en pc-filhåndtering til en fjernmontering via Samba ville medføre, at filændringstiden blev opdateret.
• Forbedrede filoverførselshastigheder.
• Løste et problem, hvor efter konfiguration af en engangs strømplan, åbning af "Application Management" panelet i Qboost ville få desktop browser-siden til at stoppe med at reagere.
• Løste et problem, hvor et Snapshot Replica-job ikke kunne logge ind på den eksterne NAS, efter at en bruger ændrede SSH-porten på den eksterne NAS og derefter genstartede den eksterne NAS.
• Rettede et problem, hvor hvis et lokalt NAS-brugernavn var identisk med et domænekontobrugernavn, efter at have ændret adgangskoden til den lokale NAS-konto, kunne brugeren ikke bruge den nye adgangskode til at logge ind på NAS'en via Samba.
• Rettede et problem, hvor en bruger, der konfigurerede 2-trinsbekræftelse, ikke kunne se sikkerhedsnøglen tydeligt, hvis grænsefladesproget var indstillet til tysk.
• Forbedret den særlige tilladelsesmekanisme for delte mapper.
• Løste et problem, hvor DA Drive Analyzer under visse sjældne forhold ikke kunne uploade diskanalysedata.
• Rettede et problem i Ressourcemonitor > Lagerressource > Lagerplads, hvor der under visse forhold ville blive vist en forkert værdi under "Andet".
• Forbedret udelukkelsesmekanismen for søgeordsfilter i notifikationscentrets underretningsregler.
• Rettede et problem i Notifikationscenter, hvor en advarselsmeddelelsesregel, der er oprettet fra en eksisterende hændelseslog, muligvis ikke gælder som forventet, hvis søgeordsfiltrene i reglen var for lange.
• Løste et problem for nogle brugere, hvor nedlukning af NAS'en efter opdatering af firmwaren ville resultere i en genstart.
• Forbedret lagerydeevne ved at optimere midlertidig filhåndtering.
• Løste et problem i Ressourceovervågning > Lagerressource, hvor siden "Lydstyrke/LUN-aktivitet" ville vise den samme aktivitet mellem to diskenheder eller LUN'er, selvom en af ​​diskenhederne eller LUN'ernes overordnede lagerpuljer var offline.
• Rettede et problem på NAS-modeller med HDMI-udgang, hvor NAS'en stoppede med at reagere efter en genstart efter at have tilsluttet NAS'en til en HDMI-enhed og installeret HybridDesk Station.
• Rettede et problem i meddelelsescenteret, hvor en meddelelsesregel ikke kunne sende e-mail-meddelelser fra visse SMTP-servere, hvis indstillingen "Send e-mail som almindelig tekst" var aktiveret.
• Rettede et problem, hvor efter opdatering af firmwaren på et TL-R400S JBOD kabinet, lagerpuljer på kabinettet ville få en "Fejl" status.
• Løste et problem i Storage & Snapshots, hvor efter at have kørt en disktest, der resulterede i en læsefejl, viste disksundhedsoversigtssiden lejlighedsvis ikke den korrekte advarselsbeskrivelse.
• Løste et problem, hvor File Station under sjældne forhold ikke kunne oprette et delelink til en fil eller mappe.
• Rettede et problem i File Station, hvor visse tabelkolonner i vinduet Baggrundsopgave blev navngivet forkert og ikke kunne skjules.
• Storage & Snapshots viser nu disktilstanden for SSD'er korrekt som "Aktiv" eller "Standby" (tidligere "Aktiv (Spinning)" eller "Standby (Spindown)").
• Rettede et ungarsk oversættelsesproblem på skrivebordets dashboard.
• Rettede et sjældent problem, hvor File Station under visse forhold forsvandt fra hovedmenuen.
• Forbedret filadgangstilladelsesmekanismen for mapper med symbolske links.
• Rettede et problem, hvor QuLog Center registrerede flere logfiler for hvert mislykket RADIUS-brugerloginforsøg.
• Løste et problem, hvor systemet muligvis ikke fungerer normalt, hvis brugeren efter en firmwareopdatering manuelt lukkede NAS'en ned, fjernede en disk fra en eksisterende RAID-gruppe og derefter startede NAS'en igen.
• Rettede et problem, hvor hvis en lagerpools resynkroniseringsprioritet blev sat til "Resync First", og "Del mine analysedata med QNAP" var aktiveret i Storage & Snapshots > Global Settings > Disk Health, når systemet var færdig med at gensynkronisere, ville det mislykkes generere en tilsvarende log.
• Løste et problem på TS-1635AX, hvor NAS'en automatisk ville starte igen efter at have lukket NAS'en fra skrivebordet.
• Løste et problem i Storage & Snapshots, hvor en disks SED-status var inkonsistent mellem siden "Oversigt" og siden "Diske/VJBOD > Diske".
• Forbedret stabiliteten af ​​NTFS ADS-metadata efter en NAS-genstart.
• Rettede et dansk oversættelsesproblem i QuFTP Service.
• Løste et problem, hvor nogle brugere ikke kunne oprette forbindelse til en iSCSI LUN fra Ubuntu, hvis CHAP-godkendelse var aktiveret.
• Rettede et problem for nogle brugere, hvor SATA M.2 SSD'er på QM2-2S-220A udvidelseskortet efter en firmwareopdatering ikke kunne vågne fra standbytilstand.
• Løste et problem i QuLog Center, hvor nogle poster ved gruppering af logposter efter dato ville blive grupperet under den forkerte dato.
• Rettede et problem, hvor NAS'en stoppede med at reagere for nogle brugere, efter at de sluttede NAS'en til en Fibre Channel-switch.
• Løste et sjældent problem for nogle brugere, hvor søgeresultaterne muligvis viser forkerte filoprettelses- og ændringsdatoer, når de søgte filer i en delt NAS-mappe ved hjælp af Windows File Explorer.
• Løste et problem, hvor tomme mapper i søgeresultaterne ikke kunne åbnes, når der blev søgt i NAS-filer og -mapper ved hjælp af Windows File Explorer.
• Rettede et problem på TS-431K, hvor hvis NAS'en indeholdt en RAID 5-gruppe, efter genstart af NAS'en var der en chance for, at brugere ikke kunne oprette forbindelse til NAS'en.
• Løste et problem på NAS-modeller med to Thunderbolt-porte, hvor Mac-computere efter fjernelse af en installeret Thunderbolt-værtsbusadapter ikke længere kunne oprette forbindelse til NAS'en via Thunderbolt.
• Løste et problem for nogle brugere, hvor filoverførsler via SMB nogle gange ikke kunne overføre alle filer, når skjulte filer var inkluderet.