EJ1600 | Hardware Specs | QNAP (Danmark)

EJ1600 Specification

EJ1600 (Legacy)


JBOD-forbindelsesinterface	SAS
Drevplads	16 x 3,5-tommer Systemet leveres uden HDD. For HDD-kompatibilitetslisten, besøg venligst https://www.qnap.com/compatibility/
Drevkompatibilitet	3,5-tommer bays: 3,5-tommer SAS 12Gb/s, 6Gb/s harddiskdrev 3,5-tommer SATA 6Gb/s, 3Gb/s harddiskdrev 2,5-tommer SATA 6Gb/s, 3Gb/s solid state-drev Du kan kun bruge én disktype (HDD eller SSD) i en RAID-gruppe. Kombination af forskellige typer diske i én RAID-gruppe understøttes ikke.
Hot-swap
Formfaktor	3U Rackmount
Værtsinterface	To SAS (én indgang, én udgang) 6 Gbps til hver controller, 4x port
LED-indikatorer	Systemets strøm-LED (Grøn): tændt/slukket Systemstatus (Grøn/Orange): i drift, systemfejl, lav strøm, degraderet RAID-tilstand, hukommelsesfejl, fejl på ventilator/strømforsyning, for høj system-/disktemperatur, lagerpool når tærskelværdi, system udfører overtagelse, strømforsyningsenhed frakoblet LCD-statusvisning (Tocifret nummer): Status for JBOD-forbindelse
Knapper	Strøm / Nulstil
Mål (HxBxD)	132 × 446.2 × 618 mm Inkluderer ikke ørekrog og den fremspringende del af strømforsyningsenheden.
Vægt (netto)	29.2 kg
Vægt (brutto)	33.8 kg
Driftstemperatur	0 - 40°C (32°F - 104°F)
Opbevaringstemperatur	-20 - 70 °C (-4 - 158 °F)
Relativ luftfugtighed	5~95% RH ikke-kondenserende, vådpære: 27℃ (80.6℉)
Strømforsyningsenhed	Redundant/ Hot Swap ATX Strømforsyning, 450W, 90-240Vac~, 50-60Hz
Strømforbrug: Driftstilstand, typisk	344.19 W Testet med drevene helt fyldt op.
Blæser	Hot-swappable ventilatormodul (606038mm; 16000RPM/12v/2.8A x 3)
Systemadvarsel	Summer
QES
Understøtter JBOD-kaskadering
Understøtter Multi-path
Dual-controller-design (HA)
Standardgaranti	5
Administration	Funktionerne nedenfor styres via QNAP QES-operativsystemet. Support for harddisks S.M.A.R.T. kapacitet RAID-udvidelseskabinet LED-identifikator Placeringsindikation af RAID-udvidelseskabinet Placeringsindikation af harddiske på RAID-udvidelseskabinet Smart ventilatorkontrol In-band firmwareopdatering Diskene, RAID-grupper, lagerpuljer og volumener i RAID-udvidelseskabinetterne konfigureres via QES-operativsystemet. Op til 1PB enkeltvolumen Support for flere RAID-grupper i en lagerpulje for at sikre datasikkerhed Online lagerpuljeudvidelse Online volumenudvidelse Block-baseret iSCSI LUN Support for tyndt-provisioneret volumen med plads tilbagefordring Support for tyndt-provisioneret iSCSI LUN med plads tilbagefordring

Note: Use only QNAP memory modules to maintain system performance and stability. For NAS devices with more than one memory slot, use QNAP modules with identical specifications and refer to the hardware user manual to install compatible QNAP memory modules.
Warning: Using unsupported modules may degrade performance, cause errors, or prevent the operating system from starting.
QNAP reserves the right to replace partial parts or accessories if the original is no longer available from its manufacturer/supplier. Any replacement would be fully tested and verified to meet strict compatibility and stability guidelines and will deliver identical performance to the original.
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Product images are for illustrative purposes only and may differ from the actual product. Due to differences in monitors, colors of products may also appear different to those shown on the site.
Designs and specifications are subject to change without notice.

Expansion Enclosure Management

The functions listed below are managed via the QNAP QES operating system.

Support for hard disk’s S.M.A.R.T. capacity
RAID expansion enclosure LED identifier
Location indication of RAID expansion enclosure
Location indication of hard disks on RAID expansion enclosure
Smart fan control
In-band firmware update

The disks, RAID Groups, storage pools, and volumes in the RAID expansion enclosures are configured via the QES operating system.

Upto 1PB Single Volume
Support for multiple RAID groups in a storage pool to ensure data safety
Online storage pool expansion
Online volume expansion
Block-based iSCSI LUN
Support for thin-provisioned volume with space reclamation
Support for thin-provisioned iSCSI LUN with space reclamation

High Availability Based On Dual Active Controller / Dual Loop

Superior High Availability

Dual controller, dual-loop architecture to tolerate the failure of a single node
Dual back-end IO paths (dual controller configuration)
Topology:
- Single controller, single
- Single controller, multiple path, loop
- Dual-controller, single path
- Dual-controller, multiple path, loop

Scalability

Support disks up to 16
Support SATA HDD / SSD by optional SAS/SAS Interposer (LSI LSISS9252)
Support cascade JBOD configuration to connect more JBODs, up to 6 sets

Superior FRU Design

Hot swappable PSU module, disks and controller module, for easier maintenance and deployment
Dual Slim type PSU module

Intelligent Storage Manager

The QES Storage Manager neatly presents tools and options for managing system storage with an intuitive graphical interface. From reviewing the system storage allocation in the Dashboard, to managing volumes, Storage Pools, disks and iSCSI storage, the Storage Manager provides a centralized place to ease the work of storage management.