TR-002

TR-002 Specification


JBOD-forbindelsesinterface	USB
Primær chip	Mikroprocessor med hardware-RAID
Drevplads	2 x 3,5-tommer Systemet leveres uden HDD. For HDD-kompatibilitetslisten, besøg venligst https://www.qnap.com/compatibility/
Drevkompatibilitet	3,5-tommer bays: 3,5-tommer SATA 6Gb/s, 3Gb/s harddiskdrev 2,5-tommer SATA 6Gb/s, 3Gb/s harddiskdrev 2,5-tommer SATA 6Gb/s, 3Gb/s solid state-drev Du kan kun bruge én disktype (HDD eller SSD) i en RAID-gruppe. Det er ikke understøttet at kombinere forskellige typer diske i én RAID-gruppe. TR-002 understøtter ikke QDA-A2AR/ QDA-A2MAR.
Hot-swap
USB 3.2 Gen 2-port (10 Gbps)	1 x Type-C USB 3.2 Gen 2 10 Gbps
Formfaktor	Tower
Mål (HxBxD)	168.5 × 102 × 219 mm Dimensioner inkluderer ikke fodpude (fodpude kan være op til 30mm / 1,18 tommer høj afhængig af model)
Vægt (netto)	1.37 kg
Vægt (brutto)	1.54 kg
Driftstemperatur	0 - 40°C (32°F - 104°F)
Opbevaringstemperatur	-20 - 70 °C (-4 - 158 °F)
Relativ luftfugtighed	5~95% RH ikke-kondenserende, vådpære: 27℃ (80.6℉)
Strømforsyningsenhed	Minimum 36W adapter (12VDC), 100-240VAC
Strømforbrug: HDD-slumretilstand	2.98 W
Strømforbrug: Driftstilstand, typisk	10.15 W Testet med drevene helt fyldt op.
Blæser	1 x 70 mm, 12 VDC
Systemadvarsel	Summer
Kensington-sikkerhedsslot
QTS / QuTS hero
Windows
Ubuntu
Mac
Anvendes som hardware-RAID (DAS)
Standardgaranti	2
RAID 1
RAID 0
JBOD
Enkelt disk

Note: Use only QNAP memory modules to maintain system performance and stability. For NAS devices with more than one memory slot, use QNAP modules with identical specifications and refer to the hardware user manual to install compatible QNAP memory modules.
Warning: Using unsupported modules may degrade performance, cause errors, or prevent the operating system from starting.
QNAP reserves the right to replace partial parts or accessories if the original is no longer available from its manufacturer/supplier. Any replacement would be fully tested and verified to meet strict compatibility and stability guidelines and will deliver identical performance to the original.
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Product images are for illustrative purposes only and may differ from the actual product. Due to differences in monitors, colors of products may also appear different to those shown on the site.
Designs and specifications are subject to change without notice.

System modes	Individual, JBOD, hardware RAID 0/1, Software control (Software control requires a QNAP NAS or Windows/macOS utility) Note: You can only use one disk type (HDD or SSD) in a RAID group. Combining different types of disk in one RAID group is not supported.
Features	Disk modes: Individual, JBOD, RAID 0, RAID 1. System, fan, and drive failure monitoring with LED and audio alerts. System sleep* during USB cable disconnection and host device hibernation** or shut down. RAID rebuild delays the sleep. *Some hosts may not be supported.
Minimum system requirements	QNAP NAS or PC with a USB Type-A or Type-C port
Minimum operating system requirements	QNAP NAS: QTS 4.3.6 (or later) Windows: Windows 8.1 (or later), Windows Server 2012 R2 (or later) Mac: macOS X 10.13 (or later)
System fan	5-speed automatic fan control
Software utility	Windows/macOS: QNAP External RAID Manager
Supported File Systems	NAS storage (EXT4), external hard drive (EXT3, EXT4, NTFS, FAT32, HFS+, and exFAT) Purchase of an exFAT driver license from the License Center is required.
QTS Storage Management Features	General & External Storage Mode Overview device, disks, and RAID info and status Support for disk S.M.A.R.T. monitoring Determine location of enclosure using LEDs and system speakers External RAID software configuration RAID rebuild RAID recovery Firmware update Format partition Erase partition and device NAS Storage Mode The storage pools and volumes in the expansion enclosures are configured via the QTS operating system. Volume and LUN snapshots - Snapshot Manager Snapshot Cloning - Snapshot Replica - Snapshot Vault Support for Windows Previous Versions (CIFS/SMB) Show more...
Software utility Features	QNAP External RAID Manager Overview device, disks, and RAID information and status Support for disk S.M.A.R.T. monitoring Determine location of enclosure using LEDs and system speakers Desktop notifications for device alerts External RAID software configuration RAID rebuild - RAID rebuild speed customization RAID recovery - Firmware update Notifications when new firmware and application versions are available System event logs for troubleshooting Export event logs to .csv file Note: Actual performance may vary depending on operating environment and other factors, such as RAID mode, RAID configuration, disk model and capacity. Show more...

Note:
QTS does not support DRM content and some IPv6 services.
Some data encryption features may be unavailable because of country-specific legislative restrictions.
Some features may vary by model.
Designs and specifications are subject to change without notice.