Global - English
Sign out
Get licenses for advanced features from our Software Store.
HBS 3 Hybrid Backup Sync
HBS 3 Hybrid Backup Sync 18.0.1104
( 2021/11/09 )
[Fixed Issues]
- After updating HBS 3 to version 18.0.1012, if you create a sync job with OneDrive as the destination and subsequently change the destination folder into a shared folder, running the sync job would fail and produce an "AttributeError" message.
- After updating HBS 3 to version 18.0.1012, if you ran a sync job that had been created before the update, the job would fail and produce a "KeyError" message.
- After updating HBS 3 to version 18.0.1012, if you create a sync job with OneDrive as the destination and subsequently change the destination folder into a shared folder, running the sync job would fail and produce an "AttributeError" message.
- After updating HBS 3 to version 18.0.1012, if you ran a sync job that had been created before the update, the job would fail and produce a "KeyError" message.
HBS 3 Hybrid Backup Sync 18.0.1012
( 2021/10/15 )
[Security Updates]
- Fixed security issues (CVE-2021-3711, CVE-2021-3712).
[New Features]
- Added support for OVHcloud and IONOS cloud storage services.
- Added support for Amazon S3 Object Lock.
- Added support for a new region on Oracle Cloud.
HBS 3 Hybrid Backup Sync 3.0.210916
( 2021/09/24 )
[Fixed Issues]
- TS-x70 series NAS would display "HBS Application Error" after installing or upgrading to HBS 3.0.210810.
- TS-x70 series NAS would display "HBS Application Error" after installing or upgrading to HBS 3.0.210810.
HBS 3 Hybrid Backup Sync 3.0.210810
( 2021/09/14 )
[Fixed Issues]
- Some OneDrive accounts could not be added as a storage space.
- Some OneDrive accounts could not be added as a storage space.
HBS 3 Hybrid Backup Sync 17.2.0726
( 2021/08/06 )
[New Features]
- Hyper Data Protector (HDP) is now supported.
HBS 3 Hybrid Backup Sync 17.1.0719
( 2021/07/22 )
[Fixed Issues]
- Some OneDrive accounts could not be added as a storage space.
- After creating and running a QuDedup-enabled cloud backup job, if the user ran a data integrity check, the check would immediately stop and the system would indicate that it was stopped by the user.
- When an active sync job to the cloud encountered a SourceContentChangedError, the system log would incorrectly display a TypeError.
- After creating a backup job to a remote NAS as destination, where version management was enabled and QuDedup was disabled, running the job multiple times would not create the same number of backup versions as expected.
- Fixed some issues that caused QuDedup-enabled local backup jobs to fail.
- When running an active sync job from an SMB server, if the data being transferred contained permission denied files, the job would fail with a warning.
- One-way sync jobs via RTRR server to a remote destination would fail.
HBS 3 Hybrid Backup Sync 3.0.210506 for QTS 4.3.3 and QTS 4.3.4
( 2021/05/14 )
[Applicable Models]
- End-of-life NAS models running QTS 4.3.3 and QTS 4.3.4.
[Important Notes]
- This is a security update for end-of-life NAS models running QTS 4.3.3 and QTS 4.3.4.
[Enhancements]
- Improved code security.
HBS 3 Hybrid Backup Sync 17.0.0512
( 2021/05/14 )
[Enhancements]
- Improved the Time Machine user interface.
[Fixed Issues]
- Relinking backup data created from a local backup job would fail if QuDedup was disabled.
- The RTRR Server screen would display an error after upgrading HBS 3 from v13.0.0930 to v16.0.0419.
- The RTRR Server settings displayed an incorrect default port number in HBS 3 v16.0419 on NAS devices running QTS 4.5.3.1630 or later.
- One-way sync jobs using the FTP protocol would fail if the source included any file names disallowed by the FTP server, rather than keep running and skipping the disallowed files.
- One-way sync jobs to a Backblaze cloud storage space would often fail due to a JSON decoding error.
- QuDedup-enabled backup jobs to an external drive would take an unexpectedly long time to complete.
HBS 3 Hybrid Backup Sync 3.0.210507
( 2021/05/14 )
[Applicable Models]
- End-of-life NAS models running QTS 4.3.6
[Important Notes]
- This is a security update for end-of-life NAS models running QTS 4.3.6.
[Enhancements]
- Improved code security.
HBS 3 Hybrid Backup Sync 3.0.210411
( 2021/04/29 )
[Applicable Models]
- End-of-life NAS models running QTS 4.3.3 or 4.3.4
[Important Notes]
- This is a security update for end-of-life NAS models running QTS versions 4.3.3 and 4.3.4.
[Security Updates]
- Fixed a security vulnerability.
HBS 3 Hybrid Backup Sync 3.0.210412 for QTS 4.3.6
( 2021/04/23 )
[Security Updates]
- Fixed a credential vulnerability.
- Fixed two command injection vulnerabilities.
HBS 3 Hybrid Backup Sync 16.0.0419
( 2021/04/22 )
[Fixed Issues]
- After restarting the NAS, the RTRR server would not function properly.
HBS 3 Hybrid Backup Sync 16.0.0415
( 2021/04/16 )
[Important Notes]
- If you update your NAS operating system from QTS 4.5.1 or earlier to QTS 4.5.2 or later, and you have previously created a job with an external USB device as a source or destination, you may encounter an error in running the job. To fix this issue, please refer to this FAQ.
[Security Updates]
- Fixed a credential vulnerability.
- Fixed two command injection vulnerabilities.
[New Features]
- Backup jobs now support data integrity checks, which analyze your backups and attempt to repair any corrupted data.
- Users can now back up and restore Qsync folders.
- Users can now choose whether to keep records of transferred files.
[Enhancements]
- Users can now configure scheduled jobs to automatically eject an external drive after job completion.
[Fixed Issues]
- When creating an S3 storage space, the selected region and storage class would not be correctly configured on S3.
- Users could not successfully create a remote RTRR job if they selected a shared folder with spaces in the folder name.
- On certain NAS models, reinstalling or updating HBS 3 would display a system error when viewing the RTRR Server screen, and all RTRR server settings would be cleared.
- After updating HBS 3, previously created two-way sync jobs would fail for the following cloud destinations: Amazon Drive, Dropbox, Google Drive, OneDrive.
- RTRR/SMB/FTP backup and sync jobs would run for an unexpectedly long time.
- Fixed a localization issue.
- Fixed some minor bugs.
HBS 3 Hybrid Backup Sync 15.1.0225
( 2021/03/05 )
[Important Notes]
- HBS 3 will discontinue access to Amazon Drive on April 30, 2021.
- To phase out support for Amazon Drive gradually, you can no longer create new jobs with Amazon Drive as a source or destination, but you can continue to run existing jobs that access Amazon Drive until April 30, 2021.
- If you use Amazon Drive for your HBS 3 jobs, please make alternative arrangements as soon as possible.
HBS 3 Hybrid Backup Sync 15.0.0128
( 2021/02/03 )
[Fixed Issues]
- When executing an RTRR sync job, the displayed status would stop at “Syncing…5%” and then jump directly to “Success”.
- One-way sync jobs to OneDrive for Business would fail if the filename and file path were too long.
- Could not create an rsync job from Synology Hyper Backup to a QNAP encrypted shared folder through the rsync server in HBS 3.
- After updating HBS 3 on certain NAS models, one-way sync job reports would fail to provide certain information.
- The total capacity of a connected Google education account would not display as unlimited.
- One-way sync jobs to HiDrive would finish with an error if the total file size was over 2GB.
- On certain NAS models, HBS 3 would take too long to stop when the NAS was preparing for a system reboot.
- After creating and successfully running a QuDedup-enabled backup job to a Google cloud service, if you deleted some files from the source and ran the backup job again, the job would fail but the system log would indicate that the user had stopped the job.
- After successfully running an rsync job from Ubuntu to a NAS via the Ubuntu command line, and then restarting the NAS, running the job again via the Ubuntu command line would fail with an authentication error.
- When creating a backup job to a Google Cloud Storage space, selecting an existing bucket would return a file error.
- Fixed some minor bugs.
HBS 3 Hybrid Backup Sync 14.0.1215
( 2020/12/17 )
[New Features]
- Active sync jobs now support the rsync protocol.
- The RTRR server now supports access with local NAS accounts.
- CSV files are now available in job reports for inspecting transferred files, and also filtered and skipped files.
- Local jobs can now be scheduled to run after a specified incoming job.
[Enhancements]
- Improved information displayed in job reports.
- Added the statuses of past job runs in job reports.
- Running jobs now display more detailed information.
- The incoming jobs list now also displays jobs that have enabled QuDedup.
[Fixed Issues]
- After creating a two-way sync job with the cloud service Box, if files on the cloud were deleted and later restored from trash, those files on the NAS would also be deleted but not later restored.
- Fixed some minor bugs.
HBS 3 Hybrid Backup Sync 13.0.0930
( 2020/10/08 )
[Important Notes]
- Starting with this version of the application, the version number format V13.0.MMDD will replace the previous format V3.0.YYMMDD.
[Enhancements]
- Added "Africa (Cape Town)" to the Amazon S3 Glacier region list.
- Added support for a Google Drive shortcut.
- Improved RTRR performance.
- When creating a job, the user can now see information on the physical ports and their corresponding network speeds for each virtual switch.
- Added integration with QuWAN.
[Fixed Issues]
- Opening the application caused an error if the "etc" folder contained a "timezone" subfolder.
- After executing a remote sync job where the user had selected "Remove additional files in destination folder", the deleted files would not appear in the @Recycle folder of the local device.
- Backup jobs to Backblaze B2 Cloud Storage had an abnormal transmission speed.
- In QTS 4.4.1, an anomalous error message would appear when executing an SMB job if the remote device operated on Windows Server 2003.
- Fixed some minor bugs.
HBS 3 Hybrid Backup Sync 3.0.200805
( 2020/08/07 )
[New Features]
- Added support for ACL replication between QTS and QTS hero.
- You can now copy an existing job's settings when creating a new job.
- You can automatically assign a network interface to a job, or manually select a network interface.
[Enhancements]
- Added new AWS S3 region "AWS S3 UE (Milan) ue-south-1" for Italian users.
[Fixed Issues]
- Fixed incorrect button text.
- After creating and running a job, HBS would create a folder called "None" under /share/home/.
- If you set the QTS date and time format to a format beginning with DD or MM and you set the QTS timezone to a timezone with daylight saving time, then the displayed last run time for a job was incorrect by one hour.
HBS 3 Hybrid Backup Sync 3.0.200727
( 2020/07/31 )
[Fixed Issues]
- A backup/sync job with a schedule set to auto-backup would not automatically run after connecting an external storage device.
- A one-way sync job using OneDrive for Business sometimes failed with message “AttributeError”.
- Wasabi backup jobs would fail with a disk error after enabling Windows ACL support.
- After you created a Dropbox backup job with Qudedup and multiple versions enabled, then deleted the source files, the job would fail to run with message “InvalidError”.
HBS 3 Hybrid Backup Sync 3.0.200529
( 2020/06/05 )
[New Features]
- Added support for AWS Signature Version 4 to S3 compatible.
- Added support for luckycloud S3 storage service.
- Added support for Google Cloud Archive storage.
[Enhancements]
- You can now choose to share anonymized HBS data with QNAP, in order to improve future products.
- Added debug log to job options, to help debug failed jobs.
- The option "Only compare file size and modification time date" is now enabled by default for one-way sync jobs, to help reduce download costs.
- You can now select a specific bucket when adding an Amazon S3 or S3 Compatible account to HBS.
- When creating a cloud backup job, you can back up directly to the root storage space without creating a subfolder.
- Added option "Compare only file size and modification date during first scan" for Azure one-way sync jobs.
[Fixed Issues]
- In certain circumstances, files modified locally were not updated in the cloud.
- While executing a remote restore, if you selected a remote NAS running firmware 4.2.6 and there were a large number of subfolders, HBS could not open the remote source folder.
- Setting a rate limit for cloud synchronization jobs had no effect.
- If the QTS system port was set to a non-default port, the HBS user interface would display an error.
- Scheduled jobs would not execute correctly if the NAS time zone was set to one of the following locations: Amsterdam, Belgrade, Casablanca, Helsinki, London, Sarajevo.
- Czech and German characters in file names were encoded incorrectly during cloud backup jobs.
HBS 3 Hybrid Backup Sync 3.0.200424
( 2020/04/28 )
[Fixed Issues]
- Some USB One Touch Copy setting values were incorrect in QTS 4.4.2.
- In certain conditions, HBS would not open normally.
HBS 3 Hybrid Backup Sync 3.0.200413
( 2020/04/17 )
[Fixed Issues]
- Running a USB One Touch Copy backup job would fail on QTS 4.4.2.
HBS 3 Hybrid Backup Sync 3.0.200326
( 2020/04/07 )
[Fixed Issues]
- Fixed some minor UI-related issues.
- Fixed an issue where Amazon-S3-compatible storage would fail.
[Enhancements]
- HBS now uses the time zone setting from QTS.
- Added support for Catalyst Object Storage.
- Revised the Keystone API.
HBS 3 Hybrid Backup Sync 3.0.200212
( 2020/02/18 )
[Fixed Issues]
- In certain circumstances, HBS could not start.
- In certain circumstances, incoming jobs did not appear on the Incoming Jobs page.
- Files would fail to sync with Wasabi Cloud if there were special characters in their filenames.
- In certain circumstances, backup jobs would fail with error “TypeError”.
- Fixed some language translation errors.
- Fixed some minor UI-related issues.
[Enhancements]
- Increased the maximum length of Rsync and FTP remote server usernames to 64 characters.
- Increased the maximum length of Rsync and FTP remote server passwords to 128 characters.
HBS 3 Hybrid Backup Sync 3.0.200113
( 2020/01/17 )
[New Features]
- Added support for SharePoint.
- Added support for Alibaba Cloud Transfer Acceleration.
- Added support for accessing cloud storage through a proxy server.
- Added support for ACL replication between NAS devices running QTS hero.
- You can now create a new backup job linked to existing backup data.
Note: If the backup destination is a remote NAS, then you must update HBS on both the local and remote NAS to use this feature.
[Fixed Issues]
- Creating remote NAS storage space failed in certain circumstances.
- Creating a remote NAS backup job failed in certain circumstances.
- When enabling the RTRR server, HBS would incorrectly report that the specified RTRR port was already in use.
- Job source data filters were not applied in certain circumstances.
- HBS was unable to connect to remote NAS devices using IPv6.
- Jobs which backed up the local Qsync folder to cloud storage would fail.
- One-way sync jobs to Dropbox would sometimes encounter errors.
- Language translation errors.
- Minor UI-related issues.
- ARM models: Backing up a file larger than 2 GB to Yandex would fail.
[Enhancements]
- Improved the user interface and application workflow.
- Improved the wording of warning messages.
