TL-D800C (USB) | Hardware Specs

TL-D800C Specification

TL-D800C


JBOD Connection Interface	USB
Drive Bay	8 x 3.5-inch The system is shipped without HDD. For the HDD compatibility list, please visit https://www.qnap.com/compatibility/
Drive Compatibility	3.5-inch bays: 3.5-inch SATA 6Gb/s, 3Gb/s hard disk drives 2.5-inch SATA 6Gb/s, 3Gb/s solid state drives You can only use one disk type (HDD or SSD) in a RAID group. Combining different types of disk in one RAID group is not supported.
Hot-swappable
Form Factor	Tower
Host Interface	1 x USB 3.2 Gen 2 Type-C
LED Indicators	HDD 1-8, Status, Link, Fan error
Buttons	Power switch
Dimensions (HxWxD)	188.2 × 329.3 × 281.4 mm Dimensions do not include foot pad (foot pad may be up to 30mm / 1.18 inches high depending on model)
Weight (Net)	8.13 kg
Weight (Gross)	8.4 kg
Operating Temperature	0 - 40 °C (32°F - 104°F)
Storage Temperature	-20 - 70°C (-4°F - 158°F)
Relative Humidity	5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F)
Power Supply Unit	250W PSU, 100 - 240V
Power Consumption: Operating Mode, Typical	48.4 W Tested with drives fully populated.
Fan Mode Switch	(Auto, high, medium, low)
Fan	2 x 120mm, 12VDC
System Warning	Buzzer
Kensington Security Slot
QTS / QuTS hero
Windows
Ubuntu
Standard Warranty	2

Note: Use only QNAP memory modules to maintain system performance and stability. For NAS devices with more than one memory slot, use QNAP modules with identical specifications and refer to the hardware user manual to install compatible QNAP memory modules.
Warning: Using unsupported modules may degrade performance, cause errors, or prevent the operating system from starting.
QNAP reserves the right to replace partial parts or accessories if the original is no longer available from its manufacturer/supplier. Any replacement would be fully tested and verified to meet strict compatibility and stability guidelines and will deliver identical performance to the original.
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Product images are for illustrative purposes only and may differ from the actual product. Due to differences in monitors, colors of products may also appear different to those shown on the site.
Designs and specifications are subject to change without notice.

Supported O.S.	QNAP QTS / QuTS hero, Windows, Linux
QTS / QuTS hero	QTS 4.4.2 / QuTS hero h4.5.0 (or newer)
QTS QTS drive monitoring and storage pool support	Yes
QTS advanced drive features such as bad block scan, Erase,Performance Test, Seagate Ironwolf IHM	Yes
RAID migrated & expanded	Yes
Qtier on Enclosure	Yes
Utility for other platform	QNAP JBOD Manager
Windows	Win8 or nerwer / Server2012 R2 or newer
Linux	Ubuntu 18.04
Device Info (Health/Bus type/PSU/Temperature/FAN)	Yes
Device Temperature Warning & automatic FAN control	Yes
Event Log (support Export)	Yes
Enclosure located via LED & beep	Yes
LCM + enclosure customizable naming	N/A
SATA wiring determination	N/A

Note:
QTS does not support DRM content and some IPv6 services.
Some data encryption features may be unavailable because of country-specific legislative restrictions.
Some features may vary by model.
Designs and specifications are subject to change without notice.