QXG-10G2TB Specification

  1. Dual-port, 5-speed 10 GbE network expansion card (Legacy)

    Dimensions (L x W x H) 102.15 mm length × 1-slot width × Low-profile (The dimension is based on PCBA size × not including the bracket) mm
    Controller Marvell AQtion AQC113C; Driver download: From Marvell AQtion (not required for QTS)
    Number of Ports 2 x NBASE-T (RJ45)
    Connector NBASE-T (RJ45)
    PCIe and Lanes PCIe 3.0 x4
    Transmission Rates 10Gbps/5Gbps/2.5Gbps/1Gbps/100Mbps
    IEEE Standards IEEE 802.3an
    IEEE 802.3bz
    Bracket Low-profile bracket pre-installed; full-height and specialized (for selected QNAP NAS) brackets are bundled
    Supported NAS operating systems QTS 4.5.4 /QuTS hero h4.5.4 or later (recommend an upgrade to the latest version); Windows 10/11 (Driver required)
    Supported QNAP NAS Models with PCIe slot(s) (1 free slot required)
    Support Ubuntu Commercial Linux Distribution Linux 3.10 and higher
    Support RedHat Linux 3.10 and higher
    Support Windows Windows 10/11 (32-bit/64-bit)
    Support Debian Linux 3.10 and higher
    Port and Cable RJ-45; over CAT-6 class cable
    Package Contents 1 x Network card; 1 x QIG; 3 x Brackets
    Standard Warranty 3 years
    หมายเหตุ: QNAP ขอสงวนสิทธิ์ในการเปลี่ยนชิ้นส่วนหรืออุปกรณ์บางรายการหากของเดิมไม่มีจำหน่ายจากผู้ผลิต/ซัพพลายเออร์อีกต่อไป การเปลี่ยนใด ๆ จะได้รับการทดสอบและตรวจสอบอย่างเต็มที่เพื่อให้เป็นไปตามแนวทางความเข้ากันได้และความเสถียรที่เข้มงวด และจะให้ประสิทธิภาพเหมือนกับของเดิมทุกประการ
    ภาพผลิตภัณฑ์ใช้เพื่อการประกอบการอธิบายเท่านั้นและอาจแตกต่างจากสินค้าจริง เนื่องจากความแตกต่างของหน้าจอ สีของผลิตภัณฑ์อาจแตกต่างจากที่แสดงบนเว็บไซต์
    การออกแบบและสเปกอาจมีการเปลี่ยนแปลงโดยไม่ต้องแจ้งให้ทราบล่วงหน้า

เลือกสเปค

      ดูเพิ่มเติม น้อยลง

      This site in other countries/regions:

      open menu
      back to top