TR-004

TR-004 Specification


JBOD Connection Interface	USB
Main chip	Micro processor with hardware RAID
Drive Bay	4 x 3.5-inch The system is shipped without HDD. For the HDD compatibility list, please visit https://www.qnap.com/compatibility/
Drive Compatibility	3.5-inch SATA 3Gb/s slot (supports SATA 6Gb/s hard drives with backward compatibility, performance limited to 3Gb/s) 2.5-inch SATA 3Gb/s slot (supports SATA 6Gb/s hard drives with backward compatibility, performance limited to 3Gb/s) 2.5-inch SATA 3Gb/s slot (supports SATA 6Gb/s solid state drives with backward compatibility, performance limited to 3Gb/s) You can only use one disk type (HDD or SSD) in a RAID group. Combining different types of disk in one RAID group is not supported. TR-004 does not support the QDA-A2AR/ QDA-A2MAR.
Hot-swappable
USB 3.2 Gen 1 Port	1 x Type-C USB 3.2 Gen 1 (USB 3.2 Gen 1)
Form Factor	Tower
Dimensions (HxWxD)	168,5 × 160,2 × 219 mm Dimensions do not include foot pad (foot pad may be up to 30mm / 1.18 inches high depending on model)
Weight (Net)	3.18 kg
Weight (Gross)	3.18 kg
Operating Temperature	0 - 40 °C (32°F - 104°F)
Storage Temperature	-20 - 70°C (-4°F - 158°F)
Relative Humidity	5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F)
Power Supply Unit	Minimum 60W adapter (12VDC), 100-240VAC
Power Consumption: HDD Sleep Mode	4.17 W
Power Consumption: Operating Mode, Typical	18.21 W Tested with drives fully populated.
Fan	1 x 120mm, 12VDC
System Warning	Buzzer
Kensington Security Slot
QTS / QuTS hero
Windows
Ubuntu
Mac
Used as Hardware RAID (DAS)
Standard Warranty	2
RAID 10
RAID 5+ Spare
RAID 5
RAID 1
RAID 0
JBOD
Single Disk

Megjegyzés: A QNAP fenntartja a jogot, hogy egyes alkatrészeket vagy kiegészítőket lecseréljen, ha az eredetiek már nem elérhetőek gyártónál/beszállítónál. Minden egyes helyettesítő elem teljes tesztelésen és hitelesítésen esik át, hogy megfeleljen a szigorú kompatibilitási és biztonsági előírásoknak, és az eredetivel megegyező teljesítményt fog nyújtani.
A termékképek csak illusztrációként szolgálnak és eltérhetnek a tényleges terméktől. A monitorok eltéréseiből kifolyólag a termékek színei eltérhetnek a weboldalon látottaktól.
A dizájnok és a specifikációk előzetes értesítés nélkül változhatnak.

System modes	Individual, JBOD, hardware RAID 0/1/5/10, Software CTRL (Software control mode is for use with QNAP NAS and Windows/macOS utility)
Features	RAID rebuild in RAID 1/5/10. System, fan, and drive failure monitoring with LED and audio alerts. System sleep during USB cable disconnection and host device hibernation* or shut down. *Some hosts may not be supported. The unused disk drives automatically become the hot spare ones for the RAID 1 and RAID 5 types.
Minimum operating system requirements	QNAP NAS: QTS 4.3.6 and later Windows: Windows 8.1 and later Mac: macOS X 10.11 and later
System fan	5-speed automatic fan control
Software utility	Windows/macOS: QNAP External RAID Manager
Supported File Systems	NAS storage (EXT4)External hard drive (EXT3, EXT4, NTFS, FAT32, HFS+, and exFAT) Note: To use exFAT QNAP NAS you must purchase an exFAT driver license from License Center.
QTS Storage Management Features	General & Extenal Storage Mode Overview device, disks, and RAID info and status Support for disk’s S.M.A.R.T. monitoring Location indication of blinking drive LEDs and sound beeping of enclosure External RAID software configuration RAID rebuild - Hot spare disk configuration RAID recovery Firmware update Format partition Erase partition and device NAS Storage Mode The storage pools and volumes in the expansion enclosures are configured via the QTS operating system. Volume and LUN snapshots - Snapshot Manager Snapshot Cloning - Snapshot Replica - Snapshot Vault Support for Windows Previous Versions (CIFS/SMB) Show more...
Software utility Features	QNAP External RAID Manager Overview device, disks, and RAID info and status Support for disk’s S.M.A.R.T. monitoring Location indication of blinking drive LEDs and sound beeping of enclosure Destop notification to inform abnormal status External RAID software configuration RAID rebuild - RAID rebuild speed customization RAID recovery - Firmware update Notification for new version of firmware and application System event logs for troubleshooting Export event logs to .csv file Note: Actual performance may vary depending on operating environment and other factors, such as RAID mode, RAID configuration, disk model and capacity. Show more...

Note:
QTS does not support DRM content and some IPv6 services.
Some data encryption features may be unavailable because of country-specific legislative restrictions.
Some features may vary by model.
Designs and specifications are subject to change without notice.