TR-004 Specification

  1. TR-004

    JBOD Connection Interface USB
    Main chip 하드웨어 RAID가 있는 마이크로 프로세서
    Drive Bay 4 x 3.5인치
    시스템은 HDD 없이 출하됩니다.
    HDD 호환성 목록은 https://www.qnap.com/compatibility/에서 확인하세요
    Drive Compatibility 3.5인치 SATA 3Gb/s 슬롯 (SATA 6Gb/s하드 드라이브지원, 하위 호환 가능, 성능은 3Gb/s로 제한됨)
    2.5인치 SATA 3Gb/s 슬롯 (SATA 6Gb/s하드 드라이브지원, 하위 호환 가능, 성능은 3Gb/s로 제한됨)
    2.5인치 SATA 3Gb/s 슬롯 (SATA 6Gb/s 솔리드 스테이트하드 드라이브지원, 하위 호환 가능, 성능은 3Gb/s로 제한됨)
    RAID 그룹에서는 하나의 디스크 유형(HDD 또는 SSD)만 사용할 수 있습니다. 하나의 RAID 그룹에 다른 유형의 디스크를 혼합하는 것은 지원되지 않습니다.

    TR-004는 QDA-A2AR/ QDA-A2MAR를 지원하지 않습니다.
    Hot-swappable
    USB 3.2 Gen 1 Port 1 x Type-C USB 3.2 Gen 1 (USB 3.2 Gen 1)
    Form Factor 타워
    Dimensions (HxWxD) 168.5 × 160.2 × 219 mm
    발판을 포함하지 않은 치수 (모델에 따라 발판은 최대 30mm / 1.18인치 높이일 수 있음)
    Weight (Net) 3.18 kg
    Weight (Gross) 3.18 kg
    Operating Temperature 0 - 40°C (32°F - 104°F)
    Storage Temperature -20 - 70°C (-4°F - 158°F)
    Relative Humidity 5~95% RH 비응축, 습구: 27˚C (80.6˚F)
    Power Supply Unit 최소 60W 어댑터 (12VDC), 100-240VAC
    Power Consumption: HDD Sleep Mode 4.17 W
    Power Consumption: Operating Mode, Typical 18.21 W
    드라이브가 완전히 채워진 상태에서 테스트되었습니다.
    Fan 1 x 120mm, 12VDC
    System Warning 부저
    Kensington Security Slot
    QTS / QuTS hero
    Windows
    Ubuntu
    Mac
    Used as Hardware RAID (DAS)
    Standard Warranty 2
    RAID 10
    RAID 5+ Spare
    RAID 5
    RAID 1
    RAID 0
    JBOD
    Single Disk
    참고: 시스템 성능 및 안정성을 유지하려면 QNAP 메모리 모듈만 사용하십시오. 두 개 이상의 메모리 슬롯이 있는 NAS 장치의 경우 동일한 사양의 QNAP 모듈을 사용하고 하드웨어 사용자 설명서를 참조하여 호환 가능한 QNAP 메모리 모듈을 설치하십시오.
    경고: 지원되지 않는 모듈을 사용하면 성능이 저하되거나, 오류가 발생하거나, 운영 체제가 시작되지 않을 수 있습니다.
    QNAP은 제조업체/공급기 전에 부품 또는 액세서리를 대체할 권리를 보유할 권리가 있습니다. 모든 교체는 엄격한 호환성 및 안정성 지침을 충족하여 원래의 호환성을 충족시키고 원래의 성능을 제공할 것입니다.
    The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
    제품 이미지는 예시용이며 실제 제품과 다를 수 있습니다. 모니터의 차이로 인해 제품 색상이 사이트에 표시된 색과 다르게 나타날 수도 있습니다.
    디자인과 사양은 통지 없이 변경될 수 있습니다.
System modes

Individual, JBOD, hardware RAID 0/1/5/10, Software CTRL (Software control mode is for use with QNAP NAS and Windows/macOS utility)

Features
  1. RAID rebuild in RAID 1/5/10.
  2. System, fan, and drive failure monitoring with LED and audio alerts.
  3. System sleep during USB cable disconnection and host device hibernation* or shut down.
    *Some hosts may not be supported.
  4. The unused disk drives automatically become the hot spare ones for the RAID 1 and RAID 5 types.
Minimum operating system requirements
  1. QNAP NAS: QTS 4.3.6 and later
  2. Windows: Windows 8.1 and later
  3. Mac: macOS X 10.11 and later
System fan

5-speed automatic fan control

Software utility

Windows/macOS: QNAP External RAID Manager

Supported File Systems

NAS storage (EXT4)External hard drive (EXT3, EXT4, NTFS, FAT32, HFS+, and exFAT) Note: To use exFAT QNAP NAS you must purchase an exFAT driver license from License Center.

QTS Storage Management Features
  1. General & Extenal Storage Mode
    • Overview device, disks, and RAID info and status
    • Support for disk’s S.M.A.R.T. monitoring
    • Location indication of blinking drive LEDs and sound beeping of enclosure
    • External RAID software configuration
    • RAID rebuild - Hot spare disk configuration
    • RAID recovery
    • Firmware update
    • Format partition
    • Erase partition and device
  2. NAS Storage Mode
    • The storage pools and volumes in the expansion enclosures are configured via the QTS operating system.
    • Volume and LUN snapshots - Snapshot Manager
    • Snapshot Cloning - Snapshot Replica - Snapshot Vault
    • Support for Windows Previous Versions (CIFS/SMB)
Show more...
Software utility Features
  1. QNAP External RAID Manager
    • Overview device, disks, and RAID info and status
    • Support for disk’s S.M.A.R.T. monitoring
    • Location indication of blinking drive LEDs and sound beeping of enclosure
    • Destop notification to inform abnormal status
    • External RAID software configuration
    • RAID rebuild - RAID rebuild speed customization
    • RAID recovery - Firmware update
    • Notification for new version of firmware and application
    • System event logs for troubleshooting
    • Export event logs to .csv file

Note: Actual performance may vary depending on operating environment and other factors, such as RAID mode, RAID configuration, disk model and capacity.

Show more...
Note:
QTS does not support DRM content and some IPv6 services.
Some data encryption features may be unavailable because of country-specific legislative restrictions.
Some features may vary by model.
Designs and specifications are subject to change without notice.
TR-004 external RAID enclosure

TR-004 external RAID enclosure

AC power adapter x 1

AC power adapter x 1

Power Cord x 1

Power Cord x 1

USB Type-C to Type-A connector cable x 1

USB Type-C to Type-A connector cable x 1

Drive tray keys x 2

Drive tray keys x 2

USB cable clip x 1

USB cable clip x 1

Screws for 2.5-inch drives x 12

Screws for 2.5-inch drives x 12

Screws for 3.5-inch drives x 16

Screws for 3.5-inch drives x 16

Quick Installation Guide (QIG)

Quick Installation Guide (QIG)

옵션 액세서리

확장 카드, 전원 어댑터 및 액세서리와 같이 제품과 함께 제공되는 번들 액세서리에는 1년 보증이 적용됩니다.

사양 선택

      더 보기 적게 보기

      다른 국가/지역 사이트:

      open menu
      back to top