EJ1600 v2 | Hardver specifikáció

EJ1600 v2 Specification

EJ1600 v2 (Legacy)


JBOD Connection Interface	SAS
Drive Bay	16 x 3.5-inch The system is shipped without HDD. For the HDD compatibility list, please visit https://www.qnap.com/compatibility/
Drive Compatibility	3.5-inch bays: 3.5-inch SAS 12Gb/s, 6Gb/s hard disk drives 3.5-inch SATA 6Gb/s, 3Gb/s hard disk drives 2.5-inch SATA 6Gb/s, 3Gb/s solid state drives You can only use one disk type (HDD or SSD) in a RAID group. Combining different types of disk in one RAID group is not supported.
Hot-swappable
Form Factor	3U Rackmount
Host Interface	Three SAS (one input, one output, one reserved) 12Gbps for each controller, 4x port
LED Indicators	System Power LED (Green): on/off System Status (Green/ Orange): in operation, system errors, low power, degraded RAID mode, memory failure, fan/power supply failure, system/disk temperature too high, storage pool reaching threshold value, system performing take-over, power supply unit unplugged LCD Status Display (Two-digit number): Status of JBOD connection
Buttons	Power / Reset
Dimensions (HxWxD)	132 × 446,2 × 618 mm Excludes ear hook and the protruding part of the Power Supply Unit.
Weight (Net)	29.2 kg
Weight (Gross)	33.8 kg
Operating Temperature	0 - 40 °C (32°F - 104°F)
Storage Temperature	-20 - 70°C (-4°F - 158°F)
Relative Humidity	5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F)
Power Supply Unit	Redundant/ Hot Swap ATX Power Supply, 450W, 90-240Vac~, 50-60Hz
Power Consumption: Operating Mode, Typical	344.19 W Tested with drives fully populated.
Fan	Hot-swappable fan module (606038mm; 16000RPM/12v/2.8A x 3)
System Warning	Buzzer
QES
Supports JBOD cascading
Supports Multi-path
Dual-controller design (HA)
Standard Warranty	5
Management	The functions listed below are managed via the QNAP QES operating system. Support for hard disk’s S.M.A.R.T. capacity RAID expansion enclosure LED identifier Location indication of RAID expansion enclosure Location indication of hard disks on RAID expansion enclosure Smart fan control In-band firmware update The disks, RAID Groups, storage pools, and volumes in the RAID expansion enclosures are configured via the QES operating system. Upto 1PB Single Volume Support for multiple RAID groups in a storage pool to ensure data safety Online storage pool expansion Online volume expansion Block-based iSCSI LUN Support for thin-provisioned volume with space reclamation Support for thin-provisioned iSCSI LUN with space reclamation

Megjegyzés: A QNAP fenntartja a jogot, hogy egyes alkatrészeket vagy kiegészítőket lecseréljen, ha az eredetiek már nem elérhetőek gyártónál/beszállítónál. Minden egyes helyettesítő elem teljes tesztelésen és hitelesítésen esik át, hogy megfeleljen a szigorú kompatibilitási és biztonsági előírásoknak, és az eredetivel megegyező teljesítményt fog nyújtani.
A termékképek csak illusztrációként szolgálnak és eltérhetnek a tényleges terméktől. A monitorok eltéréseiből kifolyólag a termékek színei eltérhetnek a weboldalon látottaktól.
A dizájnok és a specifikációk előzetes értesítés nélkül változhatnak.

Expansion Enclosure Management

The functions listed below are managed via the QNAP QES operating system.

Support for hard disk’s S.M.A.R.T. capacity
RAID expansion enclosure LED identifier
Location indication of RAID expansion enclosure
Location indication of hard disks on RAID expansion enclosure
Smart fan control
In-band firmware update

The disks, RAID Groups, storage pools, and volumes in the RAID expansion enclosures are configured via the QES operating system.

Upto 1PB Single Volume
Support for multiple RAID groups in a storage pool to ensure data safety
Online storage pool expansion
Online volume expansion
Block-based iSCSI LUN
Support for thin-provisioned volume with space reclamation
Support for thin-provisioned iSCSI LUN with space reclamation

High Availability Based On Dual Active Controller / Dual Loop

Superior High Availability

Dual controller, dual-loop architecture to tolerate the failure of a single node
Dual back-end IO paths (dual controller configuration)
Topology:
- Single controller, single
- Single controller, multiple path, loop
- Dual-controller, single path
- Dual-controller, multiple path, loop

Scalability

Support disks up to 16
Support cascade JBOD configuration to connect more JBODs, up to 6 sets

Superior FRU Design

Hot swappable PSU module, disks and controller module, for easier maintenance and deployment
Dual Slim type PSU module

Intelligent Storage Manager

The QES Storage Manager neatly presents tools and options for managing system storage with an intuitive graphical interface. From reviewing the system storage allocation in the Dashboard, to managing volumes, Storage Pools, disks and iSCSI storage, the Storage Manager provides a centralized place to ease the work of storage management.