Search

How to configure IPv6 settings on QuRouter?

Last modified date: 2024-08-07

Applicable Products

Hardware

  • QHora-301W
  • QHora-321
  • QHora-322
  • QMiro-201
  • QMiroPlus-201W

Software

QuRouter 2.2.0 and later version

Procedure

  1. Log in to QuRouter.
  2. Go to Network > Physical Interface Settings > WAN.
  3. Identify a WAN interface.
  4. Under Action, click .  
    The port configuration window appears. 
  5. Navigate to the IP Address Assignment section.
  6. Click IPv6.
  7. Click Enable IPv6.
  8. Configure the connection settings.
    SettingUser Action
    DHCPv6

    DHCPv6 requires the router to acquire an IPv6 address and DNS settings automatically from the upstream DHCPv6 server provided by the ISP. This method is generally applicable for most deployments, particularly when the device operates behind a modem and the ISP dictates the IPv6 connection type.
    The implemented DHCPv6 mechanism seamlessly integrates with prevalent protocols like SLAAC. In scenarios where a static IPv6 address is not mandatory, DHCPv6 is the recommended approach for automatic IPv6 configuration.

    Static IP

    Manually assign a static IP address to the adapter. You must specify the following information:

    • Fixed IP Address
    • Prefix length
      Note
      Obtain the prefix length information from your network administrator.
    • Default gateway
    • Primary and secondary DNS servers
  9. Click Apply.

QuRouter applies the IPv6 settings on the interface.

Further Reading

How to configure DS-Lite and MAP-E (v6 Plus) settings on a QNAP router?

Was this article helpful?

Yes. No.
100% of people think it helps.
Thank you for your feedback.

Please tell us how this article can be improved:

If you want to provide additional feedback, please include it below.

Choose specification

      Show more Less

      Choose Your Country or Region

      open menu
      back to top