FAQ

Manually Upgrade/Downgrade firmware by QTS web interface

Last modified date: 2022-03-30

Procedures

Note: Before start,please read How to manually upgrade / downgrade firmware to find NAS model and download the firmware for your NAS.

1. Find Control Panel > System > Firmware Update.

2. Click Firmware Update and Browse the img file on your PC/Mac , then Update System

3.Click OK if you want to upgrade/downgrade the firmware version.

4.Fimware uploading will start after clicking OK.

5.If the uploaded firmware version is older than the current firmware version, following prompt will pop.Please read them and check I have read the above and understand the risks of downgrading firmware if you want to proceed, click Update System.

6. Wait for firmware upgrading process finished.

Related links

1. How to manually upgrade / downgrade firmware

Was this article helpful?

Yes. No.

71% of people think it helps.

Please tell us how this article can be improved:

The article is missing important information
The article's solutions do not work
The article is too complicated
The article contains incorrect information
The article is out-of-date

If you want to provide additional feedback, please include it below.

If you want to provide additional feedback, please include it below.