Why do I fail to create VJBOD disks on some remote NAS devices?

Last modified date: 2024-03-05

Applicable Products

QTS
QuTS hero

Root Cause

New virtual JBOD (VJBOD) features have been introduced in QTS 5.1.0 and QuTS hero h5.1.0. These new features are incompatible with earlier versions of QTS and QuTS hero.

This means that if your local NAS is running QTS 5.0.x (or earlier) or QuTS hero h5.0.x (or earlier), you cannot create a VJBOD disk on a remote NAS running QTS 5.1.0 (or later) or QuTS hero h5.1.0 (or later).

Note

However, if your local NAS is running QTS 5.1.0 (or later) or QuTS hero h5.1.0 (or later), you can still create VJBOD disks on a remote NAS running QTS 5.0.x (or earlier) or QuTS hero h5.0.x (or earlier).

Solution

If you encounter this problem, you can update the local NAS to QTS 5.1.0 (or later) or QuTS hero h5.1.0 (or later).

The best practice is to ensure that both local and remote NAS devices are running the same operating system version.

Was this article helpful?

Yes. No.

50% of people think it helps.

หากต้องการความช่วยเหลือเพิ่มเติม สอบถามผู้ใช้รายอื่นและผู้เชี่ยวชาญของ QNAP ได้ในคอมมูนิตี้ ไปที่ QNAP Community

Please tell us how this article can be improved:

The article is missing important information
The article's solutions do not work
The article is too complicated
The article contains incorrect information
The article is out-of-date

If you want to provide additional feedback, please include it below.