TX-800P | Hardver specifikáció

TX-800P Specification

TX-800P (Legacy)


JBOD Connection Interface	Thunderbolt
Drive Bay	8 x 3.5-inch The system is shipped without HDD. For the HDD compatibility list, please visit https://www.qnap.com/compatibility/
Drive Compatibility	3.5-inch bays: 3.5-inch SATA 6Gb/s, 3Gb/s hard disk drives 2.5-inch SATA 6Gb/s, 3Gb/s hard disk drives 2.5-inch SATA 6Gb/s, 3Gb/s solid state drives You can only use one disk type (HDD or SSD) in a RAID group. Combining different types of disk in one RAID group is not supported.
Hot-swappable
Form Factor	Tower
Host Interface	Thunderbolt 2
LED Indicators	Status, Fan, Temperature, Thunderbolt ports
Buttons	Power switch
Dimensions (HxWxD)	185,2 × 298,2 × 235,4 mm
Weight (Net)	7.3 kg
Weight (Gross)	8.6 kg
Operating Temperature	0 - 40 °C (32°F - 104°F)
Storage Temperature	-20 - 70°C (-4°F - 158°F)
Relative Humidity	5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F)
Power Supply Unit	ATX Power Supply, 250W, 100-240Vac~, 50-60Hz
Power Consumption: HDD Sleep Mode	24.9 W
Power Consumption: Operating Mode, Typical	50.66 W Tested with drives fully populated.
System Warning	Buzzer
QTS / QuTS hero
Standard Warranty	2
Management	Managed via QNAP QTS OS 1. Supports disk S.M.A.R.T. information 2. Locate RAID expansion enclosures 3. Locate hard disks on RAID expansion enclosure 4. Smart fan control by detecting system and hard drive temperature

Megjegyzés: A QNAP fenntartja a jogot, hogy egyes alkatrészeket vagy kiegészítőket lecseréljen, ha az eredetiek már nem elérhetőek gyártónál/beszállítónál. Minden egyes helyettesítő elem teljes tesztelésen és hitelesítésen esik át, hogy megfeleljen a szigorú kompatibilitási és biztonsági előírásoknak, és az eredetivel megegyező teljesítményt fog nyújtani.
A termékképek csak illusztrációként szolgálnak és eltérhetnek a tényleges terméktől. A monitorok eltéréseiből kifolyólag a termékek színei eltérhetnek a weboldalon látottaktól.
A dizájnok és a specifikációk előzetes értesítés nélkül változhatnak.

Expansion Enclosure Management

An expansion enclosure is managed using the QTS operating system of the NAS it is connected to. Once attached, an expansion enclosure will be displayed in Storage Manager of the attached NAS alongside a variety of management features. Please note that expansion enclosure functions may vary by QTS version. Below are some fundamental functions for expansion enclosures in QTS.

* QTS 4.1 (or newer) is recommended when using an expansion unit.

Expand the Storage Pool of the attached NAS or create separate Storage Pools & Volumes on expansion enclosures.
Check hard disk S.M.A.R.T. information, S.M.A.R.T. test and performance test report.
Easily locate/identify expansion units as well as individual hard disks installed within them.

The QTS Storage Manager comes with many advanced functions that have evolved with each version of QTS to provide easier and more efficient storage management. The following are some core applications or functions that are useful for expansion units:

Use the Dashboard to view system storage allocation or obtain an overview of space utilization by volume.
Move data to another QNAP NAS for data backup or recovery using QJBOD Express.
https://www.qnap.com/go/tutorial/con_show.php?op=showone&cid=155
Optimize performance and reduce costs by automatically allocating data to faster or higher-capacity storage media (based on usage frequency) using Qtier.
https://www.qnap.com/go/tutorial/con_show.php?op=showone&cid=181

All features are subject to change based on different QTS versions or NAS models. Please refer to the software specifications of your respective NAS model.

To learn more about using Storage Manager, please visit our Tutorials & FAQ site:
https://www.qnap.com/faq