How do I install a Let’s Encrypt SSL certificate for my custom DDNS domain in QTS?

Last modified date: 2025-08-01

Applicable Products

QTS 5.0 and later

Scenario

Users who register a custom domain (via DDNS or an external DNS provider) may want to enable HTTPS access to their QNAP NAS. QTS provides built-in support for obtaining SSL certificates from Let’s Encrypt, making this process straightforward.

Solution

Follow the steps below to install an SSL certificate from Let’s Encrypt for your custom domain:

Ensure the following prerequisites are met:
1. Your NAS must be accessible from the internet using the custom domain (e.g., yourname.ddns.net).
2. Port 80 (HTTP) must be open and properly forwarded from your router to the NAS.
3. The custom domain must resolve to the NAS’s public IP address.
Install the certificate from Let’s Encrypt:
1. Go to Control Panel > System > Security > SSL Certificate & Private Key.
2. Click Replace Certificate.
3. From the dropdown menu, select Get from Let’s Encrypt.
4. Enter the following information:
  1. Domain Name: Your registered custom domain (e.g., yourname.ddns.net)
  2. Email Address: A valid email address to receive renewal notifications
5. Click Apply.
After installation:
1. The system will attempt to validate the domain and automatically install the certificate.
2. Once successful, your NAS will use the Let’s Encrypt certificate for HTTPS connections.

Was this article helpful?

Yes. No.

32% of people think it helps.

Để được hỗ trợ thêm, hãy hỏi những người dùng khác và chuyên gia QNAP trong cộng đồng. Đến Cộng đồng QNAP

Please tell us how this article can be improved:

The article is missing important information
The article's solutions do not work
The article is too complicated
The article contains incorrect information
The article is out-of-date

If you want to provide additional feedback, please include it below.