[Thông báo bảo mật quan trọng] Phát hiện các trang web giả mạo Qfinder Pro. Tìm hiểu thêm >

FAQ

How to stop the running RAID rebuilding process

Last modified date: 2024-07-11

Applied models:

All NAS Series

Applied Firmware:

All QTS system (not QES or Hero)

Please login SSH console with admin or get root permission by sudo -i

Stop RAID resync by the command

echo frozen >/sys/block/md1/md/sync_action

(the device name “md1” will need to be adjusted to the relevant device name on your NAS)

Was this article helpful?

Yes. No.

33% of people think it helps.

Để được hỗ trợ thêm, hãy hỏi những người dùng khác và chuyên gia QNAP trong cộng đồng. Đến Cộng đồng QNAP

Please tell us how this article can be improved:

The article is missing important information
The article's solutions do not work
The article is too complicated
The article contains incorrect information
The article is out-of-date

If you want to provide additional feedback, please include it below.

If you want to provide additional feedback, please include it below.