[Thông báo bảo mật quan trọng] Phát hiện các trang web giả mạo Qfinder Pro. Tìm hiểu thêm >

FAQ

How to configure hot spare disk for RAID in QES?

Last modified date: 2017-12-01

In QES system, as long as the disk is initialized and its status is READY, this disk will be treated as global hot spare disk. You don’t need to configure and assign which disk is hot spare disk but you need to reserve the disk whose status is READY to be a hot spare disk.

Ex: In the picture below, there is a RAID 6 (Disk5 - Disk15) group and Disk16 is the hot spare disk.

Was this article helpful?

Yes. No.

100% of people think it helps.

Để được hỗ trợ thêm, hãy hỏi những người dùng khác và chuyên gia QNAP trong cộng đồng. Đến Cộng đồng QNAP

Please tell us how this article can be improved:

The article is missing important information
The article's solutions do not work
The article is too complicated
The article contains incorrect information
The article is out-of-date

If you want to provide additional feedback, please include it below.

If you want to provide additional feedback, please include it below.