Why does the NAS with add-on Adapter lose network connection if built-in Adapter is disconnected?

Last modified date: 2022-06-24

Applied Products:

All NAS Series

All QTS Firmware Versions

Scenario:

Why does the NAS, with built-in Adapter 1 and with add-on network card Adapter 2 (QXG-2G1T-I225 2.5GbE), lose network connection if the built-in Adapter 1 is disconnected? This may happen if QuFirewall is installed in the NAS.

Solution:

When Qufirewall is installed in the NAS, the QuFirewall will automatically create some Allow rules for the available interface (such as the built-in Adapter 1).

If an add-on network card (such as QXG-2G1T-I225 2.5GbE Adapter 2) is installed in the NAS, you need to manually set up an Allow rule for the add-on Adapter in QuFirewall.

Was this article helpful?

Yes. No.

27% of people think it helps.

Để được hỗ trợ thêm, hãy hỏi những người dùng khác và chuyên gia QNAP trong cộng đồng. Đến Cộng đồng QNAP

Please tell us how this article can be improved:

The article is missing important information
The article's solutions do not work
The article is too complicated
The article contains incorrect information
The article is out-of-date

If you want to provide additional feedback, please include it below.