Why cannot I remotely access QVR Server via myQNAPcloud Link using QVR Pro Client?

Last modified date: 2026-03-05

Applicable Products

QVR Pro Client

Root Cause

QVR Pro Client versions 2.5.x and earlier do not support myQNAPcloud Link as a remote connection method to QVR Server.

Workaround

To remotely access QVR Server with QVR Pro Client 2.5.x or earlier, use one of the following methods:

VPN: Establish a VPN connection to the network where QVR Server is located, then connect QVR Pro Client to QVR Server using its local IP address.

Port forwarding: Configure port forwarding on the router to expose the QVR Server service port to the internet, then connect QVR Pro Client using the public IP address or DDNS hostname.

Recommendation

We recommend upgrading QVR Pro Client to version 2.6.0 or later. Starting from version 2.6.0, QVR Pro Client supports myQNAPcloud Link for remote access to QVR Server without VPN or port forwarding configuration.

Was this article helpful?

Yes. No.

30% of people think it helps.

Để được hỗ trợ thêm, hãy hỏi những người dùng khác và chuyên gia QNAP trong cộng đồng. Đến Cộng đồng QNAP

Please tell us how this article can be improved:

The article is missing important information
The article's solutions do not work
The article is too complicated
The article contains incorrect information
The article is out-of-date

If you want to provide additional feedback, please include it below.