[Fontos biztonsági figyelmeztetés] Hamis Qfinder Pro weboldalakat észleltünk. Tudjon meg többet >

Can I use an UPS connected in another NAS as a network UPS slave?

Release date: 2022-06-24

Applied models:

All NAS Series

Applied Firmware:

All

Unfortunately, it is not possible to use an UPS connected in another NAS as a network UPS slave, the current configuration of the QNAP NAS does not support this type of configuration, it is necessary that the UPS can work as a Server with its own IP, so this can be configured properly, please, refer to the link below with further information about how to configure it in the correct way.

Related Document:
Configuring the UPS Settings

Was this article helpful?

Yes. No.

33% of people think it helps.

További segítségért kérdezze meg a többi felhasználót és a QNAP szakértőit a közösségben. Irány a QNAP közösség

Please tell us how this article can be improved:

The article is missing important information
The article's solutions do not work
The article is too complicated
The article contains incorrect information
The article is out-of-date

If you want to provide additional feedback, please include it below.

If you want to provide additional feedback, please include it below.