QWA-AC2600 | Hardware Specs | QNAP (Philippines)

QWA-AC2600 Specification

2.4/5 GHz Dual Band Dual Concurrent (DBDC), 4 x 4 Multi-user MIMO (MU-MIMO), low-profile PCI Express (PCIe) 2.0 x1 wireless adapter


Standard Warranty	1 year
Controller	Qualcomm QCA9984 NICs
PCIe and Lanes	PCI Express (PCIe) 2.0 x1
Theoretical maximum performance	2.4/5 GHz
Antenna	4 x Dual-band RP-SMA antennas
Supported operating systems	QTS 4.3.4 (or later) and WirelessAP Station 1.0 (or later). Visit https://www.qnap.com/compatibility for supported NAS.
Package Contents	1 x QWA-AC2600 PCIe wireless adapter, 4 x detachable antennas + magnetic stand base, Full-height & specialized (for selected QNAP NAS) brackets and Quick Installation Guide
Note	QNAP NAS models with a 32-bit ARM processor require QTS 4.3.5 (or later). For compatible QNAP NAS, visit https://www.qnap.com/compatibility The WirelessAP Station app requires Container Station be installed on your QNAP NAS. To use the QWA-AC2600 installed on QNAP NAS as a client, QTS 4.3.5 (or later) is required. The driver used by the QWA-AC2600 (ath10k) is built in to Ubuntu 17.10 (and later). When the QWA-AC2600 is installed in a PC, the following channels are supported: - 2.4GHz: 1 to 11 - 5GHz: 36, 37, 38, 149, 153, 157, 161 and 165

Note: QNAP reserves the right to replace partial parts or accessories if the original is no longer available from its manufacturer/supplier. Any replacement would be fully tested and verified to meet strict compatibility and stability guidelines and will deliver identical performance to the original.
Product images are for illustrative purposes only and may differ from the actual product. Due to differences in monitors, colors of products may also appear different to those shown on the site.
Designs and specifications are subject to change without notice.