QMiroPlus-201W

QMiroPlus-201W Specification


Number of Ethernet Ports	5
2.5GbE Host Port (RJ45)	1
1GbE (RJ45)	4
CPU	Router: Qualcomm IPQ4019, Quad 4cores ARM Cortex A7@716.8MHz NAS: Intel Gemini Lake J4125 4cores @2.0Ghz
Memory	Router: 512MB DDR3 NAS: 4GB DDR4
Flash Memory	Router: 4MB SPI NOR Flash+4GB eMMC NAS:4GB eMMC
Wireless Antenna	4 Internal Antennas
Wireless Standard	802.11a/b/g/n/ac
Wireless Speed Rating	AC2200
Wireless Speed 2.4 GHz	2.4G (400Mbps): 2x2 Dual Band(20/40MHz)
Wireless Speed 5 GHz	5G (867+867Mbps): 2x2 Dual Band(20/40/80MHz), 2x2 Single Band (20/40/80MHz)
Frequency Band 2.4 GHz
Frequency Band 5 GHZ
Wireless Bandwidth	20/40/80MHz
Transmit Output Power	Depends on country code
Wireless Antenna Type	2 Internal dual band(2.4G/5G) antennas 2 Internal single band(5G) antennas
Antenna Gain 2.4 GHz	2.5dBi, 2.6dBi
Antenna Gain 5 GHz	4.6dBi, 4.4dBi
Transmission Power	24dBm
Wi-Fi 5 (802.11ac)
USB 3.2 Gen 1 port	2 Only for connecting USB dongle storage for NAS extend stroage usage
Bluetooth	Version 5
Bluetooth Antenna Gain	3.42dBi
Button	Power(for NAS), Reset, WPS
Power	12V DC
Power consumption	60W
Dimensions	183.5x105x143.5
Weight	1.44Kg
Packing weight	2.15Kg
Operating Temperature	0°C ~ +40°C
Operating Humidity	5% to 95% non-condensing
Certifications	JATE / CE / FCC / BSMI / NCC / IC / SRRC / CCC / VCCI / RCM / OFCA
Wi-Fi Mesh	(with Tri-Band)
QNAP SD-WAN solution, QuWAN
Drive Bay	2 x 2.5-inch SATA 3Gb/s(Compatible with 6Gb/s SSD/HDD)
Drive Compatibility	2.5-inch bays: 2.5-inch SATA solid state drives 2.5-inch SATA hard disk drives

Note: QNAP reserves the right to replace partial parts or accessories if the original is no longer available from its manufacturer/supplier. Any replacement would be fully tested and verified to meet strict compatibility and stability guidelines and will deliver identical performance to the original.
Product images are for illustrative purposes only and may differ from the actual product. Due to differences in monitors, colors of products may also appear different to those shown on the site.
Designs and specifications are subject to change without notice.

System Status and Management	Device connection status Device health status WAN status Wireless status Firmware schedule management Show more...
Operation Modes	Wireless router mode Access point (AP) mode
Wired Network Management	WAN port x1 DHCP client PPPoE Static IP LAN port x 3 DHCP server Reserved IP table Show more...
Wireless Network Management	Supports IEEE 802.11ac (Wi-Fi 5) Supports MU-MIMO Supports band steering for dual-band (2.4GHz and 5GHz bandwidth) access points Transmission power (high, middle, and low) 20/40/80 MHz bandwidth RTS/CTS (Request to Send/Clear to Send) function Dual-band 2.4G and 5G band settings Guest wireless Smart connect SSID and password configuration Wireless scheduler Wireless (Protected Setup (WPS) Show more...
WiFi Mesh	Support up to 4 device(1 master 3 satellites per mesh system) Tri-band Add/delete node
IPv4 routing management	Direct route Static route
NAT	Port forwarding and Network Address Translation (NAT) Support FTP ALG, PPTP ALG and SIP ALG
QVPN	Secure remote access with L2TP, OpenVPN and QBelt (QNAP proprietary) protocol Client IP pool configuration VPN client management Connection logs Maximum tunnel scale: 30 Show more...
Parental Controls	Website filter Safe search Youtube Google Bing Show more...
System Setting	Restart, Reset, Backup, Audio Alert Local account, QNAP ID, Remote management Even Logs
Firmware	Firmware update Live update Schedule update Manual update Display mesh nodes firmware status Show more...
QuWAN SD-WAN Service	Auto multi-site VPN WAN optimization WAN aggregation Failover Load Balance Traffic monitoring using QuWAN Orchestrator Please refer to QuWAN page Show more...
QuRouter APP supported	Managed QMiroPlus-201W/QMiro-201W Create WiFi mesh Add/delete Wifi mesh node Please refer to QuRouter APP page
NAS Storage OS	QTS 4.5.2(embedded Linux)
Support QNAP APPs	Please refer to home cloud 2.0 page