Update firmware fails with error 004
最後修訂日期:
2022-06-24
Applied Products:
While trying to update firmware, it may fail with error FW004. In that case, it is recommended to download the firmware image directly from QNAP website, so later you can upload it manually through Qfinder Pro > Tools > Update Firmware, then upgrading the firmware this way.
If above still fails, another reason may be the NAS DOM is defective, and will need to contact QNAP Support to verify, as the NAS will possibly need to be repaired.
- All NAS Series
- All QTS Firmware Versions
While trying to update firmware, it may fail with error FW004. In that case, it is recommended to download the firmware image directly from QNAP website, so later you can upload it manually through Qfinder Pro > Tools > Update Firmware, then upgrading the firmware this way.
If above still fails, another reason may be the NAS DOM is defective, and will need to contact QNAP Support to verify, as the NAS will possibly need to be repaired.
需要進一步協助，歡迎前往官方社群發文，與其他用戶及 QNAP 專家交流。 前往 QNAP 官方社群
