QDA-SA3 | Hardware Spec

QDA-SA3 Specification

2.5-inch 6Gbps SAS to SATA drive adapter (Designed for dual-controller all-flash ES2486dc NAS)


Standard Warranty	2 years
Supported Drives	1 x 2.5-inch SATA 6Gbps SSD
Host Interface	SAS 6Gbps
Supported Operating Systems	QES 2.1.0 (or later) for dual controller NAS or JBOD
Dimensions (L x W x H)	69.87 × 21.78 × 14.5 mm
Weight	0.02 kg
Note	QDA-SA3 adapters are sold in a pack of four. The connected drive may not reach its optimal performance due to protocol translation and some overhead. QDA-SA3 does not support SSD TRIM and the drive S.M.A.R.T. feature is not supported on non-QES operating system.
Architecture Diagram

Note: QNAP reserves the right to replace partial parts or accessories if the original is no longer available from its manufacturer/supplier. Any replacement would be fully tested and verified to meet strict compatibility and stability guidelines and will deliver identical performance to the original.
Product images are for illustrative purposes only and may differ from the actual product. Due to differences in monitors, colors of products may also appear different to those shown on the site.
Designs and specifications are subject to change without notice.