[Önemli Güvenlik Uyarısı] Sahte Qfinder Pro Web Siteleri Tespit Edildi. Daha fazla bilgi edinin >

QDA-SA3
2.5-inch 6Gbps SAS to SATA drive adapter (Designed for dual-controller all-flash ES2486dc NAS)

qda-sa3

The QDA-SA3 adapter is designed for QNAP’s dual-controller all-flash array Enterprise ZFS NAS (ES2486dc) and allows the usage of a SATA 6Gbps drive in a 2.5-inch SAS 12Gbps/6Gbps drive bay — providing the ability to expand storage capacity with cost-effective SATA drives.

Note: QDA-SA3 adapters are sold in a pack of four. (Order number: QDA-SA3-4PCS)

  • 1

    Supports 2.5-inch SATA HDD/SSD.

  • 2

    Up to 6Gb/s file transfer speeds.

  • 3

    The installed SATA drive can share SAS dual-port advantages for higher reliability.

Architecture diagram


Note: The connected drive may not reach its optimal performance due to protocol translation and some overhead.

SAS dual-port advantage for fault tolerance

SAS features dual porting for redundancy, eliminating single points of failure and allowing for higher reliability and performance. By installing a SATA drive with the QDA-SA3 into a dual-controller all-flash Enterprise ZFS NAS, the SATA drive can share these SAS dual-port advantages to ensure a high-availability, fault tolerant enterprise storage environment.


Designed for all-flash Enterprise ZFS NAS

The QDA-SA3 can be easily installed in the 2.5-inch disk tray of an all-flash array Enterprise ZFS NAS (ES2486dc disk tray model: TRAY-25-NK-BLK04).

Note: QDA-SA3 does not support SSD TRIM and the drive S.M.A.R.T. feature is not supported on non-QES operating system.

QNAP Accessories Store

Get all the original accessories in one place and easily upgrade your QNAP NAS.

Yardım mı lazım?

İhtiyaçlarınıza ve gereksinimlerinize uygun daha fazla ürün veya çözüm önerisi almak için hemen bizimle iletişime geçin!

Teknik Özellik sSçin

      Daha fazla göster Daha az
      Diğer ülkelerde/bölgelerde bu site:
      open menu
      back to top