QDA-A2AR | 하드웨어 사양

QDA-A2AR Specification

Use two 2.5-inch SATA drives in a single 3.5-inch SATA drive bay with RAID support for PC and NAS


Standard Warranty	1 year
Supported Drives	2 x 2.5" SATA 6Gbps HDD/SSD (up to 9.5 mm in height)
호스트 인터페이스	SATA 6Gbps
지원되는 운영 체제	1. QTS 4.4.1 (or later) 2. Windows: Windows 7, 8.1, 10, Windows Server 2012 R2 3. Ubuntu
Dimensions (L x W x H)	138.2 × 101.6 × 25.9 mm
중량	0.15 kg
RAID 지원	RAID 0, 1
참고	The connected drive may not reach its optimal performance due to protocol translation and some overhead. All the drive data will be cleared upon drive initialization or RAID mode switching with the QDA-A2AR. Ensure that all data is backed up beforehand. Window and Linux PC supports all four modes mentioned above. QTS does not support Individual mode. It is recommended that only drives with identical model numbers and capacities are used to create a RAID 0/1 group because the total storage space will be equal to the size of the smallest drive. The SATA controller of the PC must support port multipliers to recognize two drives in the Individual mode configuration. Consult your system provider and install the latest drivers for your SATA controller. Installing a QNAP disk adapter in another QNAP disk adapter is not supported. (e.g. QDA-A2MAR cannot be installed in the QDA-A2AR.) TR-002/TR-004 RAID expansion enclosures do not support QDA-A2AR/QDA-A2MAR. QTS identifies the drives in a QDA-A2AR as a single volume. Installing two drives with a RAID 1 configuration for QDA-A2AR is required to use Qtier. If a QDA-A2AR drive fails and needs replaced: you must disable Qtier to make the QDA-A2AR drive data move to the NAS-based storage pool, and then replace the failed QDA-A2AR drive.
아키텍처 다이어그램

참고: QNAP은 제조업체/공급기 전에 부품 또는 액세서리를 대체할 권리를 보유할 권리가 있습니다. 모든 교체 제품은 엄격한 호환성 및 안정성 지침을 충족하는지 철저히 테스트하여 검증되었으며 원래 제품과 동일한 성능을 제공합니다.
제품 이미지는 설명 목적으로만 사용되었으며 실제 제품과 다를 수 있습니다. 모니터의 차이로 인해 제품 색상이 사이트에 표시된 색과 다르게 나타날 수도 있습니다.
디자인과 사양은 통지 없이 변경될 수 있습니다.

Minimum operating system requirements

QNAP NAS: QTS 4.4.1 and later
Windows: Windows 7 and later, Windows Server 2012 R2 and later
Linux

Software Utility Features

QNAP External RAID Manager

Overview device, disks, and RAID info and status
Support for disk’s S.M.A.R.T. monitoring
Desktop notification to inform abnormal status
RAID rebuild
RAID recovery
Firmware update
Notification for new version of firmware and application
System event logs for troubleshooting
Export event logs to .csv file

Note: Actual performance may vary depending on operating environment and other factors, such as RAID mode, RAID configuration, disk model and capacity.