Applicable Products
- QVR Surveillance or QVR Pro
- TP-Link Tapo C260 (and other TP-Link Tapo series cameras)
Overview
The TP-Link Tapo C260 is not currently listed on the official QVR supported camera list. However, you can typically add it to QVR Surveillance using ONVIF and use most core surveillance functions, such as live view and recording. ONVIF is a standard protocol commonly used to integrate third-party IP cameras with QVR.
Details
What can I expect when using ONVIF?
- Basic stream onboarding and recording should work normally.
- Most core surveillance features are available (actual behavior depends on the camera model and firmware).
- Compared with native support, you may encounter some limitations:
- Some vendor-specific features may not be fully mapped into QVR.
- Certain advanced controls (for example, specific PTZ behavior) may depend on the camera-side implementation.
- Some settings may still need to be configured in the Tapo app rather than entirely in QVR.
When should I choose a different camera?
- If you require the lowest integration risk and the most complete feature mapping, we recommend selecting a camera model that is already listed on the official QVR supported camera list.
- If minor feature differences are acceptable, using the Tapo C260 via ONVIF is typically a practical option.
Procedure
- Complete the initial camera setup in the Tapo app and update the camera firmware to the latest version.
- Enable ONVIF and/or RTSP on the camera, if these options are provided by your model and firmware.
- In QVR Surveillance or QVR Pro, add the camera using ONVIF and enter the correct:
- IP address
- Port
- Username
- Password
- After onboarding, validate core functions:
- Live view stability
- Recording operation
- Event detection and PTZ (if applicable)
- If the required functions are not met, consider:
- Switching to a camera model on the official QVR supported camera list, or
- Waiting for future native Tapo support updates.
If the camera cannot be added via ONVIF or core functions do not work as expected, we recommend checking the latest QVR camera compatibility list and contacting QNAP technical support with your camera model, firmware version, and QVR version.
Further Reading
適用產品
- QVR Surveillance or QVR Pro
- TP-Link Tapo C260 (and other TP-Link Tapo series cameras)
概覽
TP-Link Tapo C260 目前未列在官方 QVR 支援攝影機清單中。然而，您通常可以透過ONVIF將其新增到 QVR Surveillance，並使用大多數核心監控功能，例如即時影像和錄影。ONVIF 是一種常用於將第三方 IP 攝影機整合到 QVR 的標準協定。
詳細資訊
使用 ONVIF 時我可以期待什麼？
- 基本串流上線和錄影應正常運作。
- 大多數核心監控功能可用（實際行為取決於攝影機型號和韌體）。
- 與原生支援相比，您可能會遇到一些限制：
- 某些廠商特定功能可能無法完全對映到 QVR。
- 某些進階控制（例如特定 PTZ 行為）可能取決於攝影機端的實作。
- 某些設定可能仍需在 Tapo 應用程式中配置，而非完全在 QVR 中。
什麼時候應選擇不同的攝影機？
- 如果您需要最低的整合風險和最完整的功能對映，我們建議選擇已列在官方 QVR 支援攝影機清單中的攝影機型號。
- 如果可以接受小的功能差異，透過 ONVIF 使用 Tapo C260 通常是一個實用的選擇。
程式
- 在 Tapo 應用程式中完成初始攝影機設定並將攝影機韌體更新至最新版本。
- 在攝影機上啟用 ONVIF 和 / 或 RTSP，如果您的型號和韌體提供這些選項。
- 在 QVR Surveillance 或 QVR Pro 中，使用 ONVIF 新增攝影機並輸入正確的：
- IP 位址
- 埠
- 使用者名稱
- 密碼
- 上線後，驗證核心功能：
- 即時影像穩定性
- 錄影操作
- 事件偵測和 PTZ（如果適用）
- 如果未達到所需功能，請考慮：
- 切換到官方 QVR 支援攝影機清單中的攝影機型號，或
- 等待未來原生 Tapo 支援更新。
如果攝影機無法透過 ONVIF 新增或核心功能未如預期運作，我們建議檢查最新的 QVR 攝影機相容性清單並聯絡QNAP 技術支援，提供您的攝影機型號、韌體版本和 QVR 版本。
進一步閱讀
