REXP-1000 Pro | Hardware Spec

REXP-1000 Pro Specification

REXP-1000 Pro (Legacy)


JBOD Bağlantı Arayüzü	SAS
Sürücü Yuvası	10 x 3.5-inch The system is shipped without HDD. For the HDD compatibility list, please visit https://www.qnap.com/compatibility/
Sürücü Uyumluluğu	3.5-inch bays: 3.5-inch SAS 6Gb/s hard disk drives 3.5-inch SATA 6Gb/s, 3Gb/s hard disk drives 2.5-inch SATA 6Gb/s, 3Gb/s solid state drives You can only use one disk type (HDD or SSD) in a RAID group. Combining different types of disk in one RAID group is not supported.
Sıcak değiştirilebilir
Form Faktörü	Tower
Host Arayüzü	Two SAS 6Gbps 4x wide port (IN port, OUT port)
LED Göstergeleri	Front panel: Status, fault, system over heat, fan error Rear panel: SAS link, SAS error, enclosure ID
Düğmeler	Power Button
Boyutlar (YxGxD)	217.5 × 327 × 321.2 mm
Ağırlık (Net)	9.24 kg
Ağırlık (Brüt)	13.78 kg
Çalışma Sıcaklığı	0 - 40 °C (32°F - 104°F)
Depolama Sıcaklığı	-20 - 70°C (-4°F - 158°F)
Bağıl Nem	5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F)
Güç Kaynağı Ünitesi	ATX 350W, Input: 110-240 Vac~, 47-63Hz, 5A
Güç Tüketimi: HDD Uyku Modu	63.6 W
Güç Tüketimi: Çalışma Modu, Tipik	169.52 W Tested with drives fully populated.
Sistem Uyarısı	Buzzer
QTS / QuTS hero
JBOD zincirlemeyi destekler
Yönetim	Managed via QNAP QTS OS 1. Supports disk S.M.A.R.T. information 2. RAID expansion enclosure identifier 3. Locate RAID expansion enclosures 4. Locate hard disks on RAID expansion enclosure 5. Smart fan control by detecting system and hard drive temperature 6. In-band SAS firmware update

Note: Use only QNAP memory modules to maintain system performance and stability. For NAS devices with more than one memory slot, use QNAP modules with identical specifications and refer to the hardware user manual to install compatible QNAP memory modules.
Warning: Using unsupported modules may degrade performance, cause errors, or prevent the operating system from starting.
QNAP reserves the right to replace partial parts or accessories if the original is no longer available from its manufacturer/supplier. Any replacement would be fully tested and verified to meet strict compatibility and stability guidelines and will deliver identical performance to the original.
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Product images are for illustrative purposes only and may differ from the actual product. Due to differences in monitors, colors of products may also appear different to those shown on the site.
Designs and specifications are subject to change without notice.

Expansion Enclosure Management

The functions listed below are managed via the QNAP QTS operating system.

Support for hard disk’s S.M.A.R.T. capacity
RAID expansion enclosure LED identifier
Location indication of RAID expansion enclosure
Location indication of hard disks on RAID expansion enclosure
Smart fan control
In-band firmware update

QNAP Flexible Volume

The disks, RAID Groups, storage pools, and volumes in the RAID expansion enclosures are configured via the QTS operating system.

Support for multiple RAID groups in a storage pool to ensure data safety
Online storage pool expansion
Online volume expansion
Block-based iSCSI LUN
Support for thin-provisioned volume with space reclamation
Support for thin-provisioned iSCSI LUN with space reclamation

QNAP Flexible Volume Architecture

Intelligent Storage Manager

The QTS Storage Manager neatly presents tools and options for managing system storage with an intuitive graphical interface. From reviewing the system storage allocation in the Dashboard, to managing volumes, Storage Pools, disks and iSCSI storage, the Storage Manager provides a centralized place to ease the work of storage management.