[Önemli Güvenlik Uyarısı] Sahte Qfinder Pro Web Siteleri Tespit Edildi. Daha fazla bilgi edinin >

If I install and enable the QuFirewall on NAS and it causes the FTP service to become not accessible, what can I do to fix this?

Last modified date: 2022-06-24

Applied Products:

All NAS Series

All QTS Firmware Versions

The default profiles will added a “deny all” rule and assigned it the lowest priority. The FTP service default port is TCP 20-21, you could go to QuFirewall Firewall Profiles > Add Profile > Create Profile, then add a new allow rule for FTP service and move it before “deny all” rule priority.

Was this article helpful?

Yes. No.

50% of people think it helps.

Daha fazla yardım için toplulukta diğer kullanıcılara ve QNAP uzmanlarına sorun. QNAP Topluluğuna Git

Please tell us how this article can be improved:

The article is missing important information
The article's solutions do not work
The article is too complicated
The article contains incorrect information
The article is out-of-date

If you want to provide additional feedback, please include it below.

If you want to provide additional feedback, please include it below.