QNAP Systems, Inc. - Network Attached Storage (NAS)

Language

Support

How to use Surveillance Station (Local Display) in HD Station?

Overview

Surveillance Station (Local Display) on HD Station allows Turbo NAS devices to output high-resolution video from IP cameras. All the users need to do is connect their Turbo NAS to an HD-capable display via HDMI to instantly begin monitoring all of their surveillance activity. Users can control Surveillance Station (Local Display) by using a USB keyboard & mouse as well as the QNAP mobile app Qremote.

Please note: This feature is only supported by the TS-x69, TS-x51, TS-x53, TVS-x63, TVS-x63+, TS-x70, TS-x70 Pro, TVS-x71, TVS-x71U, TS-x79, TS-ECx79, TS-x79U, TVS-ECx80, TS-ECx80U, TS-ECx80 Series. (The TS-269H is not supported.)

Limitations:

  • To use Surveillance Station (Local Display), you must be running the corresponding version of Surveillance Station. Click here for more details.
  • Surveillance Station (Local Display) only supports software decoding and may experience performance issues if the Turbo NAS is subject to resource-intensive operations. If you encounter performance issues, please try lowering the resolution or changing the video compression to MJPG.
  • Digital zoom in/out is not supported by the TS-x69 series.
  • Live view and playback supports hardware decoding in the TS-x51, TS-x53, TVS-x71 and TVS-x71U series (a minimum of 4GB RAM is required.)

 

Contents

  • Starting Using Surveillance Station (Local Display)
  • Monitoring
    • Live view
    • PTZ Control Panel
    • Display mode
    • Options
  • Video Playback

Starting Using Surveillance Station (Local Display)

Please follow the below steps to set up Surveillance Station (local display)

  1. Make sure Surveillance Station 5.0.0 (or newer) has been installed in your App Center. Then please go to “Control Panel” > “Applications” > “HD Station”. Install the Surveillance Station from the list or manually.
  2. Make sure the IP cameras have been configured in the Surveillance Station and are connected to the network.
  3. Connect a USB keyboard & mouse to the Turbo NAS.
  4. Connect a monitor to the Turbo NAS via HDMI.
  5. Click on the Surveillance Station (Local Display) in HD Station.

  6. Please enter your User Name and Password to login.

Monitoring

Upon successfully logging in, the monitoring screen will be shown. Here you can monitor IP cameras, change the display mode, enable or disable manual recording, control the PTZ cameras, and more.

Icon Description

Monitor:
Enter the monitoring page.

Playback:
Enter the playback page.

Hide left panel:
Hide the panel on the left of the monitoring page.

Show left panel:
Show the panel on the left of the monitoring page.

Options:
Configure the event notification and video window display settings.

CPU usage:
Shows the current CPU usage of the Turbo NAS.

About:
View the server name, Turbo NAS model, firmware version, Surveillance Station version and Surveillance Station (Local Display) version.

Exit:
Exit Surveillance Station (Local Display).

Manual recording:
Enable or disable recording on the IP camera. The administrator can select to enable or disable this function in ”Surveillance Station”> ”Camera Settings” > “Camera Configuration”>”Edit”>“Video Settings” on the web-based administration interface.

Audio (optional):
Enable or mute the audio on the monitoring page.

Event Notification

Icon Description

Event notification:
When alarm recording is enabled and an event is detected, this icon will be shown. Click this icon to view the alert details. The alert sound can be enabled or muted. To clear all the logs, click ”Clear All”.

PTZ Control Panel

If the IP camera supports PTZ (Pan/Tilt/Zoom) you can use the control panel on the NVR to adjust the viewing angle of the IP camera. These functions are available depending on the camera model. Please consult the camera's documentation for more details. Please note that the digital zoom function will be disabled when the PTZ function is in use.

Icon Description

Pan and tilt:
If the PTZ camera supports pan and tilt functions, click these buttons to pan or tilt the camera.

Preset positions:
Select the preset positions of the PTZ camera.

Zoom out/Zoom in:
If the PTZ camera supports zooming, click these buttons to zoom in or zoom out.

Digital zoom:
Select a channel and click this button to enable the digital zoom function.  When enabled, click ‘+’ to zoom in or ‘-’ to zoom out.

Focus control:
Adjust the focus control of the PTZ camera.

Display Mode

The NVR supports various display modes for monitoring. Click the correct icon to switch the display mode.

Icon Description

Full screen

Single-channel mode

4-channel mode

6-channel mode

Select the page to display

Sequential mode. This mode can be used with other display modes. Click to enable or disable sequential mode. Click to define the time interval of which the channels will be displayed.

Options

To configure advanced monitor settings, click .

The following options are provided under the ‘General’ tab.

  • Event Notification:
    • When the ”Enable alert for all surveillance events” option is enabled and a surveillance event is triggered, the alert icon   will be instantly shown on the monitoring page. Click on the icon to view the alert details.
  • Display Order: Click ”Reset” to reprioritize the monitoring channels to the default order.

The following options are provided under the “Video” tab.

  • Highlight the video window when an event is triggered: The video window will flash if an event is triggered.
  • Display unauthorized channels: Select this option to show the channels that the user does not have the right to monitor.
  • Display unconfigured channels: Select this option to show the channels that have not been configured.

Video Playback

The videos on the Turbo NAS can be played on the local display. To use this feature, click on the monitoring screen. Most of the icons on the playback screen are identical to those on the monitoring screen.

Note: The playback access right to the IP cameras is required to play the videos. Login to the Surveillance Station using the web-based administration interface as the administrator and edit the playback access right in ”Privilege Settings”.

  1. When the playback screen is shown, select a camera channel on the left.

  2. Select the date you want to play (must be underlined with blue-color background.)

  3. Select the start and end time of the video and click to start searching. The videos that match the search criteria will be played automatically.

Note: The number of days between the start and end dates must be less than or equal to 2.

Playback Settings:

Play, pause, stop, reverse play a video file, or select to play the previous or next file. When playing a video, use the scroll bar to adjust the playback speed or click the digital zoom iconto zoom in/out of the video.

Right click on the IP camera channel and select the following options:

  1. Full screen
  2. Keep aspect ratio
  3. Deinterlace (available on selected camera models only)
  4. Keep original size
Release date: 2014-08-22
Was it helpful?
Thank you for your feedback.
Thank you for your feedback. If you have any question, please contact support@qnap.com
10% of people think it helps.