공용 클라우드용 QuTScloud
클라우드 데이터 사용 최적화
QNAP과 함께 클라우드 NAS 환경을 구축하세요!
QuTScloud 는 클라우드에 최적화된 QNAP NAS 운영 체제입니다. 선호하는 공용 클라우드에 QuTScloud를 설치하고, 클라우드 NAS를 시작하면 대부분의 클라우드 플랫폼에서 사용할 수 없는 유연한 파일 관리와 협업의 이점을 누릴 수 있습니다. QuTScloud 를 사용하면 특별한 하드웨어 설비 및 복잡한 클라우드 환경 관리 없이 QNAP NAS의 모든 장점을 활용할 수 있습니다.
QuTScloud 의 장점
-
빠른 설치 설명서
QuTScloud는 몇 번의 클릭만으로 설치를 마칠 수 있습니다. 그러면 전 세계에서 모든 클라우드 NAS 서비스에 액세스할 수 있습니다.
-
페이고 확장성
필요에 따라 클라우드 스토리지를 확장하세요. 대용량 하드 드라이브 또는 고성능 SSD 중 하나를 선택할 수 있습니다.
-
클라우드 데이터 최적화
클라우드 NAS는 기존 클라우드 기반 데이터를 쉽게 활용하여 더 큰 가치를 창출할 수 있습니다.
-
관리의 간편화
멀티클라우드 관리의 노력을 간소화하고 NAS 서비스(스토리지, 백업, 협업 등)를 쉽게 즐길 수 있습니다.
QuTScloud + 클라우드 스토리지 = 데이터의 가치를 높이고 관리 효율성 향상
하나 이상의 클라우드 스토리지를 사용하여 데이터를 저장할 수 있습니다. 하지만 다양한 관리 인터페이스와 기본 기능으로는 클라우드 기반 데이터를 효과적으로 사용하기 어려울 수 있습니다. QuTScloud는 클라우드 데이터 에코시스템을 대폭 개선할 수 있습니다. QNAP HybridMount 앱과 함께 지원되는 클라우드 스토리지를 QuTScloud에 마운트하면 고급 기능으로 클라우드 기반 데이터를 관리할 수 있습니다. QuTScloud 앱을 통해 클라우드 기반 데이터를 활용하여 생산성을 높일 수도 있습니다. HybridMount를 사용하여 클라우드 스토리지를 QuTScloud 데이터 저장소로 마운트하면 QuTScloud 인스턴스로 공간을 직접 설정하는 것보다 더 많은 비용을 절감할 수 있습니다.
참고: HybridMount로 마운트된 클라우드 스토리지를 사용하도록 QuTScloud 시스템 볼륨을 설정할 수 없습니다.
IT 구조에 QuTScloud NAS가 필요한 이유는 무엇입니까
연결. 번거로운 작업 없이 공통 파일 액세스 프로토콜을 사용합니다.
-
Samba를 통해 파일 브라우저로 공유
표준 프로토콜(CIFS/SMB, NFS, AFP 및 iSCSI 포함)을 통해 QuTScloud에 액세스하고 웹 기반 File Station을 사용하여 파일을 관리, 탐색 및 공유할 수 있습니다. 개별 또는 그룹 사용자 계정에 대한 인증을 설정하는 것 외에도, 디렉토리 관리를 위한 Windows AD 및 LDAP 통합은 사용자 관리를 간소화합니다. 특히 사용자가 많은 기업의 경우 보다 큰 혜택을 받을 수 있습니다.
-
안전한 VPN 연결 만들기
QuTScloud를 사용하면 전체 인터넷 연결을 위한 보안 터널을 만들어 데이터에 액세스하거나 네트워크/지리적 제한을 피할 수 있습니다. QNAP의 전용 VPN 프로토콜인 QBelt는 중요한 데이터로의 액세스 시 트래픽을 암호화함으로써 VPN 연결로 감지될 가능성을 줄입니다.
-
그룹 사용자에게 클라우드 드라이브를 제공합니다
IT 직원은 작업 그룹 사용자에게 QuTScloud 스토리지 공간을 할당하여 클라우드 드라이브를 사용하는 것처럼 파일을 쉽게 저장, 백업 및 공유할 수 있습니다. myQNAPcloud Link 서비스를 사용하면 전용 도메인 이름을 사용하여 QuTScloud에 연결할 수 있으므로 고정 IP 없이도 데이터에 쉽게 액세스, 관리 및 공유할 수 있습니다.
데이터 공유 및 보호 기능. 클라우드 공간을 매핑하고 클라우드 데이터를 쉽게 활용할 수 있습니다.
-
Amazon S3 및 S3 호환 클라우드 개체 스토리지 통합
HybridMount를 사용하면 S3 및 S3 호환 클라우드 개체 스토리지 공간을 QuTScloud에 마운트하고 중앙에서 관리할 수 있습니다. 이러한 클라우드 파일은 효율적인 파일 공유를 위해 File Station 또는 Qfile 모바일 앱을 사용하여 액세스할 수 있습니다. 클라우드 스토리지 게이트웨이로 연결된 클라우드 스토리지(HybridMount, VJBOD Cloud)는 SMB, FTP, AFP, NFS, WebDAV 프로토콜을 사용하여 액세스할 수 있으며 클라우드 데이터를 사용하여 단순화할 수 있습니다.
-
스냅샷 및 버전 관리를 통한 클라우드 기반 데이터 보호
QuTScloud는 클라우드 데이터 보호를 위한 스냅샷을 지원합니다. 빠른 백업 및 복구를 위해 여러 버전의 스냅샷 파일을 쉽게 생성할 수 있습니다. 증분 백업 기능을 사용하면 시간과 대역폭을 절약할 수 있으며 단 몇 분만에 바로 스냅샷에서 데이터를 복구할 수 있습니다.
생산성. 풍부한 기능을 탑재한 앱을 사용해 관리를 용이하게 하고 애플리케이션 잠재성을 높일 수 있습니다.
-
클라우드에서 데이터를 인덱싱하고 검색할 수 있습니다
Qsirch는 클라우드 NAS 전체에 위치한 파일과 클라우드 스토리지 게이트웨이로 연결된 클라우드 공간을 빠르게 찾을 수 있는 전체 텍스트 검색 엔진입니다. 조직은 GDPR(개인정보보호 규정) 컴플라이언스를 비롯한 많은 작업에 도움이 되는 파일을 신속하게 검색하고 식별할 수 있습니다.
-
QTS App Center에서 애플리케이션 잠재력 확장
App Center는 QuTScloud의 애플리케이션 잠재력을 확장하기 위한 백업/동기화, 생산성 및 멀티미디어 도구 등 다양한 온디맨드 설치 애플리케이션을 제공합니다. 예를 들어 알림 센터를 사용하여 QuTScloud의 상태를 쉽게 모니터링하고 Qfiling은 파일 구성을 자동화하며 QuMagie는 AI 기반 사진 앨범을 제공합니다. QuTScloud는 최적화된 네트워크 대역폭 및 보안 네트워크 연결을 위한 컨테이너화된 앱 또는 프록시 서버 호스팅도 지원합니다. 앱을 수동으로 설치할 수도 있습니다. App Center에서 자동으로 최신 버전으로 앱을 업데이트합니다.
클라우드
기반 데이터를 보유하고 있으며 우수한 파일 관리 시스템이 필요한 조직
하이브리드
클라우드와 사이트 간 파일 공유가 필요한 서비스를 제공합니다
NAS가
필요한 소규모 사무실/전문가
이미 클라우드 기반 데이터를 보유하고 있다면 QuTScloud 는 반드시 갖춰야 할 클라우드 NAS입니다.
대부분의 데이터를 클라우드에 저장했지만 디지털 자산을 활용할 수 있는 좋은 관리 시스템이 없는 조직을 위해 클라우드 NAS로서의 QuTScloud는 뛰어난 데이터 관리 솔루션을 제공합니다. 조직이 클라우드 데이터를 최적화하고 클라우드의 가치를 극대화할 수 있도록 지원하는 것이죠. 한편, 온프레미스 QNAP NAS는 IT 직원이 상주하는 중견기업과 지점에게 높은 처리량과 데이터 보호 기능을 제공합니다. 소규모 사무실과 원격 근무자에게 QuTScloud는 하드웨어 유지 보수 없이 즉각적인 연결을 제공하므로 협업 및 데이터 공유에 더욱 이상적인 선택입니다. QNAP의 myQNAPcloud Link 서비스는 QuTScloud 사용자가 복잡한 VPN 설정을 걱정하거나 전용 인터넷 연결 비용을 지불하지 않고도 클라우드 NAS에 쉽게 액세스할 수 있도록 지원합니다. 다기능 QNAP NAS 기능은 쉽게 사용할 수 있으며, 보안 강화를 위해 분리된 내부/외부 장치를 통해 권한 제어가 용이합니다.
Console Management - 문제 해결을 위한 편리한 방법
유지보수 또는 문제 해결을 수행할 때 또는 IT/기술 지원 직원이 HTTP/S를 통해 QuTScloud에 액세스할 수 없는 경우 Console Management를 사용하여 기본 구성 및 디버깅을 수행할 수 있습니다. Console Management는 SSH 또는 각 클라우드 플랫폼의 관리 콘솔을 사용하여 사용할 수 있습니다.
참고: Console Management는 QuTScloud를 초기화한 후에만 사용할 수 있습니다.
지금 바로 클라우드 NAS 경험을 시작하세요!
클라우드 기반 QNAP NAS에 QuTScloud를 설치하고, 풍부한 기능을 갖춘 지능형 QTS 환경을 누릴 수 있습니다.
합리적인 가격 + 페이고 + 수많은 무료 앱 + 부가 가치 유료 앱
QuTScloud 간편 설정 5단계
-
Step 1
QuTScloud 이미지 다운로드
-
Step 2
원하는 클라우드 플랫폼 또는 VPS에 QuTScloud 이미지 업로드
-
Step 3
QuTScloud 가상 시스템 실행
-
Step 4
QuTScloud 라이선스 구매하기
-
Step 5
라이센스를 입력하고 QuTScloud 사용을 시작합니다
Acquire QuTScloud
| 클라우드 플랫폼 | 형식 | 클라우드 마켓플레이스 | 비디오 튜토리얼 |
|---|---|---|---|
| Amazon Web Services | OVA / RAW / VHD / VMDK | AWS Marketplace | View |
| Microsoft Azure | VHD | Azure Marketplace | View |
| Alibaba Cloud | RAW / VHD | Alibaba Cloud Marketplace | View |
| DigitalOcean | QCOW2 / RAW / VHD / VMDK | --- | View |
| Catalyst Cloud | RAW | --- | View |
| Exoscale | QCOW2 | Exoscale Marketplace | View |
| Google Cloud Platform | VHD / VMDK | Coming soon | View |
| Huawei Cloud | QCOW2 / RAW / VHD / VMDK | --- | View |
| Oracle Cloud | QCOW2 / VHD / VMDK | Oracle Cloud Marketplace | View |
| Contabo | Linux Installer | --- | View |
| IONOS | QCOW2 / VHD / VMDK | --- | View |
| OVHcloud | QCOW2 / RAW / VHD / VMDK | --- | View |
| DreamHost | RAW | --- | View |
| HiCloud | OVA | --- | View |
더 많은 애플리케이션을 다운로드하기 위해 결제를 할 수 있는 앱입니다
-
QuMagie
엔터테인먼트
사진을 쉽게 탐색, 관리 및 검색할 수 있습니다. AI 이미지 인식으로 AI 앨범을 구성해 보세요.
-
Qsirch
생산성
파일을 즉시 검색하고 찾은 후 미리 보고, 다운로드하고, 공유할 수 있습니다.
-
Qfiling
생산성
파일을 분류하고 일정을 설정하면 Qfiling이 자동으로 파일을 관리해 줍니다.
-
OCR Converter
생산성
이미지에서 텍스트를 간편하게 추출하여 파일 관리, 편집 및 검색을 용이하게 합니다.
-
McAfee Antivirus
보안
소스 NAS와 비교할 수 없는 대상 NAS로 마이그레이션하는 경우 제한 사항이 적용되고 마이그레이션이 작동하지 않을 수 있습니다. 이러한 제한사항은 다음과 같습니다:
-
Boxafe
백업/동기화
Google™ Workspace 및 Microsoft® Office 365®에서 파일, 이메일, 캘린더 및 연락처를 백업 또는 동기화합니다.
크리에이티브 앱을 세상과 공유하세요!
QuTScloud App Center에 앱 및 패키지 디자인을 제출하여 전 세계 시청자들에게 다가갈 수 있습니다. 소프트웨어 개발자, 네트워크/시스템 통합업체 및 독립 코더가 제공하는 앱 제출을 환영하며, 전 세계 사용자와 앱 및 솔루션을 배포할 수 있는 효과적인 방법을 제공합니다.
자주 묻는 질문
QuTScloud에 처음 들어가면 시스템에서 옵션의 "SMTP 서비스" 및 "암호를 잊으셨습니까 설정"을 설정하여 비밀번호 찾기 서비스를 활성화하라는 메시지를 표시합니다.
잘못된 비밀번호로 로그인을 시도하면 "암호 잊어버림" 버튼이 나타납니다. 이 버튼을 클릭하고 지침에 따르면 QuTScloud가 SMTP 설정에 따라 등록된 편지함으로 복구 이메일을 보냅니다. 이메일의 링크를 클릭하고 지침에 따라 비밀번호를 재설정합니다.
라이선스가 만료되면 "License Center" 및 "myQNAPcloud"를 제외한 QuTScloud의 모든 서비스가 중단됩니다. 라이선스는 기본적으로 자동으로 갱신됩니다.
데이터는 QuTScloud 가상 하드 드라이브에 남아 있습니다. 라이선스를 갱신하면 이전과 마찬가지로 QuTScloud를 사용할 수 있습니다.
QuTScloud는 자체적으로 업데이트할 수 있으며 시스템을 수동으로 최신 버전으로 업데이트할 수도 있습니다.
QTS와 QuTScloud는 다음과 같은 동일한 보안 기능을 공유합니다. 보안 카운셀러, QVPN 서비스, 스냅샷, McAfee 안티바이러스, Malware Remover 등이 있습니다.
두 가지 방법을 사용하여 QuTScloud를 백업할 수 있으며, 두 가지 방법 모두 추가 라이선스가 필요하지 않습니다. 첫 번째 방법은 App Center에서 제공하는 스냅샷 또는 도구를 사용하는 것입니다(예: HBS 3). QuTScloud에서 제공하는 스냅샷에는 스토리지 볼륨에 사용 가능한 공간이 필요합니다. 두 번째 방법은 VM 수준 백업을 수행하여 전체 인스턴스를 한 번에 백업하는 것입니다. 이 방법은 클라우드 플랫폼/VPS 공급업체 또는 VM hypervisor에서 제공합니다.
QuTScloud는 다음을 포함하여 QTS와 동일한 프로토콜을 지원합니다: Samba, AFS, NFS, iSCSI 및 FTP. 그러나 클라우드 플랫폼/VPS 공급업체가 제공하는 방화벽은 이러한 프로토콜에 필요한 포트를 차단할 수 있습니다. QuTScloud가 인터넷에서 데이터를 수신할 수 있도록 하려면 클라우드 플랫폼/VPS 공급업체가 제공한 문서를 참조하십시오.
QuTScloud에는 QTS 기반 리소스 모니터 앱과 유사한 리소스 모니터 앱이 있습니다. 일부 리소스 정보는 하드웨어 부족으로 인해 제공되지 않습니다(예: 가상 하드 드라이브에 디스크 SMART 데이터 부족).
시스템 요구 사항
QuTScloud를 실행하려면 최소 2GB의 메모리가 필요합니다(최소 4GB의 메모리 권장). QuTScloud 가상 머신에 충분한 메모리를 할당하여 시스템 안정성과 성능을 확보합니다.
QuTScloud는 최대 25개의 디스크를 지원합니다. 첫 번째 디스크에는 QuTScloud OS 이미지만 포함됩니다. 나머지 24개의 슬롯은 데이터에 사용할 수 있습니다. 48 GB가 넘는 하드 드라이브만 QuTScloud에서 데이터 저장소 디스크로 인식되고 나열됩니다.
스토리지 풀을 생성하는 데 필요한 최소 디스크 크기는 144 GB이며 200 GB가 권장됩니다.
QuTScloud에서 라이선스를 확인하려면 인터넷 연결이 필요합니다.
QuTScloud에 액세스하려면 Google Chrome, Firefox, Safari 또는 Microsoft Edge를 사용하는 것이 좋습니다.
NAS 웹 서비스용 QuTScloud에는 포트 번호 8080 및 443이 필요합니다. 클릭하여 자세히 보기.
최종 사용자 라이선스 계약
END USER LICENSE AGREEMENT
This Software License Agreement (hereafter referred to as "License Agreement") is a legal contract jointly agreed to by the user (individual or corporate entity, hereafter collectively referred to as "User", “You” or “Your”) and QNAP Systems, Inc. and its affiliates (hereafter referred to as "QNAP"). This License Agreement covers the use of the [QuTScloud] software product (referred to as the “Software Product" or "the Software" below), including but not limited to documentation, services, and relevant intermediaries.
When the User installs, copies, or uses the Software Product in any way, the User agrees to accept this License Agreement. If the User does not agree with this License Agreement, or is unsure about the identity, technical ability, or trustworthiness of QNAP or the law of Your country or territory excludes all or part of the terms of this License Agreement, the User is not authorized to use the Software Product.
-
1. SCOPE OF AUTHORIZATION
QNAP authorizes the User to install and use this Software Product on their device or in cloud platforms under this License Agreement.
This Software Product is licensed to the User under this License Agreement, and the property shall remain with QNAP or the publisher.
2. LIMITATION
- (a) The User must strictly abide by the trademark and copyright use of all Software Product copies.
- (b) The User cannot distribute, lease, or lend the Software Product to other parties.
- (c) The User cannot reverse-engineer, decompile, or disassemble the Software Product.
- (d) The User cannot transfer their rights to use the Software Product, fully or partially, to other parties.
- (e) The User must obey all relevant legal regulations of using the Software Product.
- (f) The User is not allowed to copy the Software, the attached user manual and/or other documentation, nor acquire the source codes, software strings, information, graphics, images, and music and/or sound files.
-
3. COPYRIGHT
All compositions of this Software Product and its copies belong to QNAP or the publisher. The User shall retain the copyright mark of all the Software. The copyright of the data accessed by the Software Product belongs to the copyright owner of that data, and is protected by the relevant copyright or other intellectual property right laws. The User is not allowed to copy this software, the attached user manual and/or other documentation, nor acquire the source codes, software strings, information, graphics, images, and music and/or sound files. This License Agreement does not authorize the User the right to use the data accessed by this Software Product.
-
4. Consent to Use of Data
- (a) The User agrees that QNAP can collect the usage data (hereafter referred to as “Data”) of the Software. Data shall include, but is not limited to, technical information about your devices, system and applications. Data is gathered periodically to facilitate the provision of software updates, product support, and other services to the User (if any) related to the device when the Software has internet access with or without additional notice and liability to the User. QNAP may use the Data, as long as it is in de-identification, anonymous or any other form that does not personally identify the User, to improve its products or to provide services or technologies to the User.
- (b) QNAP guarantees the Data will be used solely for improving the product quality of the Software and will only be collectible under the User’s consent. The User acknowledges and agrees that QNAP has no responsibility or liability under any circumstance at any time for any loss, corruption or reveal of the User device’s data that may arise during the transferring of such service.
-
5. EFFECT OF DEFAULT
If the User fails to comply with the terms and conditions of this License Agreement, QNAP can terminate this License Agreement with the condition that no other rights are hindered. The User will have to return or destroy all copies of this Software Product and uninstall the Software.
-
6. DISCLAIMER
The User is solely responsible for all risks of using this Software Product. QNAP, its affiliates, or any of their respective officers, shareholders, employees, contractors, and the publisher make no warranty, expressed or implied, including, but not limited to the warranties of merchantability and fitness for a particular purpose and against infringement.
In no event shall QNAP, its affiliates, or any of their respective officers, shareholders, employees, contractors, or the publisher be liable for any special, direct, indirect, consequential, incidental, punitive or other damages whatsoever (including, without limitation, damages for loss of business profits, business interruption, loss of business information, loss of data, loss of use or equipment or facilities, loss of any other economic advantage or loss of other profits) arising out of or in connection with the availability or performance of this Software Product.
This License Agreement will remain the same even if the User has notified QNAP or the publisher of the possibility of damage in advance. In the event of damages incurred by using the Software Product, under this License Agreement, any compensation shall not exceed the amount the User paid to QNAP.
-
7. UPDATES
QNAP may periodically release updates for the Software Product. The User shall not install or use updates provided by sources other than QNAP.
-
8. SUPPORT SERVICES
QNAP is not obligated under this License Agreement to provide any support services for this Software Product. Any support is provided “as is”, with all faults and without warranty of any kind.
-
9. MODIFICATION
QNAP reserves the right to modify, suspend, or discontinue, temporarily or permanently, the application or any service to which it connects, with or without notice and without liability to the User. The modifications will be limited to updates or regular maintenance.
-
10. AMENDMENTS
QNAP reserves the right, at its sole discretion, to modify or replace this License Agreement at any time. If a revision is material, QNAP will provide at least thirty (30) days' notice prior to any new terms taking effect. What constitutes a material change will be determined at the sole discretion of QNAP.
-
11. PRIVACY
According to the General Data Protection Regulations of the European Union (“GDPR”), California Consumer Protection Act (“CCPA”) or any applicable laws and regulations, QNAP can process the personal data of data subjects only to fulfill contractual obligations or to preserve overriding legitimate interests. QNAP will collect the User’s personal data, such as [login, account name, account activity, IP address ], to provide products and services. Some functions may not work if the User prohibits the collection of personal data. QNAP has taken precautions to protect the User’s privacy and data security as stated in the https://www.qnap.com/go/before_buy/con_show.php?op=showone&cid=17. By using the Software Product, the User agrees to be bound by the Privacy Notice, which is incorporated in this Agreement.
-
12. TERM AND TERMINATION
This License Agreement shall remain in effect until the User ceases to use or uninstalls this Software Product. Some sections of this License Agreement, in accordance with their nature, shall still take effect and will survive the termination. QNAP may, in its sole discretion, at any time and for any reason, suspend or terminate this License Agreement with or without prior notice. The User may also terminate this License Agreement by deleting or uninstalling this Software Product.
-
13. GOVERNING LAW AND JURISDICTION
Any dispute, claim, or controversy in connection with or arising under the use of the Software Product or these terms and conditions, their construction, existence, interpretation, validity, or any breach hereof which cannot be amicably settled between the QNAP, its affiliates, or any of their respective officers, shareholders, employees, contractors, or the publisher, shall be finally and exclusively resolved by the laws of Taiwan, R.O.C. and shall be subject to the jurisdiction of the District Court of Taipei, Taiwan, R.O.C., provided that, however, this License Agreement shall not prevent the User from any right under local laws.