How to setup QuFirewall to allow VPN connections


Data ostatniej modyfikacji: 2022-06-24
Applicable Products:
  • QuFirewall
  • QVPN

If you want to allow VPN connections to the NAS and you enabled QuFirwall, you will need to add a couple of rules to allow the traffic to go through.

I will take the “Basic Protection” profile to add the rules. So first we need to edit the Profile:

img

Then we need to add a new rule.

img

The next step is to allow “VPN (Gateway)” and select the allowed region to access the VPN server

img

The next step is to create a new rule to allow your VPN IP pool access to the NAS.

Following are the default VPN IP pools

  • Qbelt: 10.6.0.2 - 10.6.0.254
  • PPTP: 10.0.0.2 - 10.0.0.254
  • L2TP/IPsec: 10.2.0.2 - 10.2.0.254
  • OpenVPN: 10.8.0.2 - 10.8.0.254
  • WireGuard: 192.168.17.1/24

For instance, using QBelt VPN you must allow the connections from the IP pool 10.6.0.2 - 10.6.0.254. In other words, you need to add a QuFirewall Rule to allow permission for IP address 10.6.0.0/Subnet mask 255.255.255.0 (24)

img


Finally, we will need to move the rules to the top of the list.

img

Czy artykuł ten był przydatny?

81% ludzi uważa, że to pomaga.
Dziękujemy za przekazanie opinii.

Poinformuj nas proszę, w jaki sposób możemy ulepszyć ten artykuł:

Bardziej szczegółowe opinie można wpisać poniżej.

Wybierz specyfikację

      Więcej Mniej

      Ta strona dostępna jest w też krajach/regionach:

      open menu
      back to top