How do I configure port forwarding in QHora-301W?

Release date: 2023-01-03

Applicable Products

QHora-301W

Solution

You must create a Custom Service before you can configure port forwarding.

Login QHora-301W as admin,
Go to Service Port Management > Custom Service Ports.
Click Create Custom Services.
The Add Custom Service window opens.
Configure the service.
- Service name: Enter a name to identify the service.
- Protocol: Select a connection protocol.
- WAN service port: Enter a port number.
Click Save.
Go to NAT/Firewall > NAT > Port Forwarding.
Click Add Rule
The Add Rule window opens.
Configure the rule settings.
- WAN service port: Select the custom service you created earlier.
- WAN port: Choose the physical WAN interface (for instance: 1GbE WAN Port 1)
- Host IP address: Specify the LAN IP address for the device.
- LAN service port: Specify a port number used to accept connections.
- Allow Remote IPs: Specify one of more IP addresses allowed to connect.
  Note
  Leaving this field blank will allow access from any remote IP address.
Click Apply.

Was this article helpful?

Yes. No.

47% of people think it helps.

Please tell us how this article can be improved:

The article is missing important information
The article's solutions do not work
The article is too complicated
The article contains incorrect information
The article is out-of-date

If you want to provide additional feedback, please include it below.

If you want to provide additional feedback, please include it below.