Important Notes

• To add the router to the QuWAN network, users must bind their QNAP ID in the QuWAN Settings page or log in to QuRouter with their QNAP ID.
  • QuWAN page -> Log in with QNAP ID
• 

New Features

• The following new features have been added to QMiro-201W and QMiroPlus-201W: DDNS (MyDDNS), Remote Support, and UPnP
  • DDNS Page
• 
  • Remote Support Page
• 
  • UPnP Page
• 
• Added OpenVPN protocol support in the QVPN Client Connection Profiles page.
  • QVPN Clients Page
• 
• Added the following security options in the wireless settings: WPA2-PSK/WPA3-Personal, Opportunistic Wireless Encryption (OWE)
  • Wireless -> Security
• 
• Added the WAN IP attribute feature in QuWAN settings: Public IP, Behind NAT, Behind NAT (Device role - Hub or edge), Public IP (IPSec / IKE passthrough failure)
• Reset functions on QMiro-201W: Users can reset the local account and password by pressing the reset button for 5 seconds, and reset the router settings to default settings by pressing the reset button for 10 seconds.
• Reset functions on QMiroPlus-201W: Users can reset the local account and password by pressing the WPS button for 6 seconds, and reset the router settings to default settings by pressing the WPS button for 20 seconds.

Enhancements

• Modified several user interface strings and the user interface workflow in the QuRouter user interface.
• QuRouter prompts the users to specify a strong pre-shared key when configuring the VPN server settings.
• Users can modify the device name in the QuWAN Settings page.
  • QuWAN -> Device name
• 
• QuRouter dashboard displays the user-defined device name instead of the product name in Overview.
  • Dashboard page
• 
• The updated firmware mechanism ensures that users can access the QuRouter user interface and access the internet even after reaching the maximum system sessions.

Fixed Issues

• Due to myQNAPcloud retry interval issues, users could not access the internet for 24 hours after enabling DDNS (MyDDNS) and changing the WAN IP address in QuRouter.
• After the router is added to the QuWAN network, the QuWAN VPN status would sometimes display "Disconnected" in the QuRouter QuWAN page, despite showing the "Connected" status in the QuWAN Orchestrator device dashboard page.
• Users could not update the firmware of nodes that is older than the primary router firmware in a mesh network.
• QVPN Device Client could not connect to the QVPN QBelt VPN server if the configured pre-shared key was between 14 and 16 characters.
• The QMiroPlus-201W LEDS would not work as expected.
• The USB Settings page in QMiro-201W would incorrectly display 2 USB devices connected to the router.
• Even after enabling the VPN server, users could not connect to the QVPN QBelt VPN server.
• WAN type with PPPoE may occasionally disconnect.
• Configuring the Network & Virtual Switch settings on QTS would prevent communication between the router system board and the storage system board.