PCI Expansion card QM2-2P10G1TA does not allow TS-873AU to boot
Zuletzt geändertes Datum
2023-03-10
Applied models:
-
NAS Series TS-X73AU
Applied Firmware:
-
All QTS Firmware Versions
If after installing the Expansion card QM2-2P10G1TA on a NAS series TS-X73AU model, it is not able to boot or the card is not recognized, this could be because the BIOS version is not yet updated.
To know your current BIOS, refer to the following article:
How to know BIOS and EC version on QNAP NAS
If your BIOS is older than Q052AR13, you need to update the NAS BIOS.
You can download the BIOS file from our Download Center.
The following article provide steps to update the BIOS:
