What's the difference between Apply to All Disks, Apply to ALL HDD and Apply ALL SSD in Disk Health Setting?

Last modified date: 2022-06-24

Applied Products:

All QTS and QuTS firmware versions.

In Disk Health setting, you may find there several options when you apply the settings.What is the difference between them?

Apply : Apply the settings to current disk only.

Apply to All Disks : Apply the settings to all the disks installed on the NAS.

Apply to ALL HDD : Apply the settings to all HDD (mechanical hard disks) installed on the NAS, this button only appears when you configure on a mechanical hard disk.

Apply to All SSD : Apply the settings to all SSD (solid state drives) installed on the NAS, this button only appears when you configure on a solid state drive.

Tip: Find Disk Health in Control Panel > Storage&Snapshot > Storage > Disks/VJBOD > Disk health

Was this article helpful?

Yes. No.

Please tell us how this article can be improved:

The article is missing important information
The article's solutions do not work
The article is too complicated
The article contains incorrect information
The article is out-of-date

If you want to provide additional feedback, please include it below.

If you want to provide additional feedback, please include it below.