이 콘텐츠는 AI 번역을 사용하여 번역할 수 있습니다.
한국어(으)로 번역
QHora-301W/QHora-321/QHora-322 2.2.13.016 build 20230206
2023-02-23
New Features
- Added support for IPTV functions on the QHora-301W router.
- Users can now view the wireless SSID configuration information on the VLAN Settings and Bridge Settings page.
- You can now configure the router to restart automatically on schedule.
Enhancements
- QuRouter can now display the MAC information of the WAN and LAN ports.
- Introduced several user interface changes in QuRouter to present network information in a streamlined format.
- Improved the detection and display accuracy of the radar and Dynamic Frequency Selection (DFS) Channel Availability Check (CAC) information.
- Users can now configure port 10G-3 as a WAN interface on QHora-322 routers.
- Updated the country code list for Wireless LAN Compliance Lookup.
- Improved the log information of certain event logs.
Fixed Issues
- Fixed an issue where QuRouter would still display the UPnP-enabled port after disabling UPnP on the router.
- Resolved an issue where the QuRouter initialization page would display certain strings in English in the password update page even after changing the UI language.
- Fixed an issue where a router using a PPPoE connection for a long time would disconnect from the internet and users would have to reboot the router in order to reestablish the internet connection.
- Resolved an issue where QuRouter would not refresh the channel information after selecting or deselecting a 5 GHz DFS channel.
- Fixed an issue where QuRouter would display an unexpected error message if the router is offline and the user would access QuRouter's QuWAN page.
- Fixed an issue where users could not add devices to the block list after disabling Wi-Fi Smart Connect and configuring the virtual ID in the Wireless page.
- Resolved an issue where QuRouter would display an unexpected error message when attempting to leave the QuWAN page and enable the ALG settings. This would only occur if the router was rebooted after adding the router to a QuWAN organization.
- Resolved an issue where wireless clients could still scan the QNAP router if the SSID was hidden.
- Resolved an issue where FTP clients could not connect to the FTP server via active mode after enabling FTP ALG on QuRouter.
- Fixed an issue where different VPN services could connect to the same IP subnet range.
- Fixed an issue where QuRouter would incorrectly display disconnected devices as still being connected if they were disconnected from the router's LAN connection. This would only occur if the end device was connected to the router's LAN network through a switch.
- Fixed minor bugs related to the parental control settings.
- Resolved an issue where users could not connect to the QuWAN QBelt server occasionally after the first VPN client was disconnected from the server. This would only occur when the second and subsequent users would try connecting to the server.
- Fixed an issue where QuRouter would not display all the VPN users for the VPN server in the QVPN User Settings section.
- Fixed an issue where the QuWAN VPN services on the router would not operate normally and the router would not reboot automatically after adding the router to a QuWAN organization for the first time.
Other Changes
- Changed the user interface strings in the dashboard page for WAN Overview from "link up" and "link down" to "connected" and "disconnected".
새로운 기능
- QHora-301W 라우터에서 IPTV 기능에 대한 지원을 추가했습니다.
- 이제 사용자는 VLAN 설정 및 브리지 설정 페이지에서 무선 SSID 구성 정보를 볼 수 있습니다.
- 이제 일정에 따라 라우터가 자동으로 다시 시작되도록 구성할 수 있습니다.
향상
- QuRouter는 이제 WAN 및 LAN 포트의 MAC 정보를 표시할 수 있습니다.
- 간소화된 형식으로 네트워크 정보를 표시하기 위해 QuRouter에 몇 가지 사용자 인터페이스 변경 사항을 도입했습니다.
- 레이더 및 DFS(Dynamic Frequency Selection) CAC(Channel Availability Check) 정보의 감지 및 표시 정확도가 향상되었습니다.
- 사용자는 이제 포트 10G-3을 QHora-322 라우터에서 WAN 인터페이스로 구성할 수 있습니다.
- 무선 LAN 준수 조회를 위한 국가 코드 목록을 업데이트했습니다.
- 특정 이벤트 로그의 로그 정보를 개선하였습니다.
해결한 문제
- QuRouter가 라우터에서 UPnP를 비활성화한 후에도 여전히 UPnP 활성화 포트를 표시하는 문제를 수정했습니다.
- QuRouter 초기화 페이지에서 UI 언어를 변경한 후에도 암호 업데이트 페이지에서 특정 문자열이 영어로 표시되는 문제가 해결되었습니다.
- 오랫동안 PPPoE 연결을 사용하는 라우터가 인터넷 연결을 끊고 사용자가 인터넷 연결을 다시 설정하기 위해 라우터를 재부팅해야 하는 문제를 수정했습니다.
- QuRouter가 5GHz DFS 채널을 선택하거나 선택 해제한 후 채널 정보를 새로 고치지 않는 문제를 해결했습니다.
- 라우터가 오프라인이고 사용자가 QuRouter의 QuWAN 페이지에 액세스하는 경우 QuRouter가 예기치 않은 오류 메시지를 표시하는 문제를 수정했습니다.
- Wi-Fi Smart Connect를 비활성화하고 무선 페이지에서 가상 ID를 구성한 후 사용자가 장치를 차단 목록에 추가할 수 없는 문제를 수정했습니다.
- QuWAN 페이지를 떠나 ALG 설정을 활성화하려고 할 때 QuRouter가 예기치 않은 오류 메시지를 표시하는 문제를 해결했습니다. 이것은 라우터를 QuWAN 조직에 추가한 후 라우터를 재부팅한 경우에만 발생합니다.
- SSID가 숨겨진 경우에도 무선 클라이언트가 여전히 QNAP 라우터를 스캔할 수 있는 문제를 해결했습니다.
- QuRouter에서 FTP ALG를 활성화한 후 FTP 클라이언트가 활성 모드를 통해 FTP 서버에 연결할 수 없는 문제를 해결했습니다.
- 서로 다른 VPN 서비스가 동일한 IP 서브넷 범위에 연결할 수 있는 문제를 수정했습니다.
- QuRouter가 라우터의 LAN 연결에서 연결이 끊어진 경우 연결이 끊긴 장치가 여전히 연결되어 있는 것으로 잘못 표시하는 문제를 수정했습니다. 이는 최종 장치가 스위치를 통해 라우터의 LAN 네트워크에 연결된 경우에만 발생합니다.
- 자녀 보호 설정과 관련된 사소한 버그를 수정했습니다.
- 첫 번째 VPN 클라이언트가 서버에서 연결 해제된 후 가끔 사용자가 QuWAN QBelt 서버에 연결할 수 없는 문제를 해결했습니다. 이것은 두 번째 및 후속 사용자가 서버에 연결을 시도할 때만 발생합니다.
- QuRouter가 QVPN 사용자 설정 섹션에서 VPN 서버에 대한 모든 VPN 사용자를 표시하지 않는 문제를 수정했습니다.
- 라우터를 QuWAN 조직에 처음으로 추가한 후 라우터의 QuWAN VPN 서비스가 정상적으로 작동하지 않고 라우터가 자동으로 재부팅되지 않는 문제를 수정했습니다.
기타 변경 사항
- WAN 개요에 대한 대시보드 페이지의 사용자 인터페이스 문자열을 "링크 업" 및 "링크 다운"에서 "연결됨" 및 "연결 끊김"으로 변경했습니다.
피드백을 주셔서 감사드립니다.