How do I reinitialize the NAS?
Última fecha de modificación:
2025-08-25
Applicable Products:
- All NAS series
To initialize the NAS, power on your NAS without any drives installed first (remove any m.2 SSDs as well if there are any installed).
Once powered on, find and connect to the NAS using the QFinder Pro utility, this should take you to the NAS web interface and it will prompt that that are no drives installed in the NAS. Plug in your drives at this point, the system will prompt the option to format and reinitialize the NAS.
Warning: This will format and remove all data on the drives if there are any. Ensure to backup these data first if you wish to keep them.
