【重要資安警示】發現冒充 Qfinder Pro 的非官方網站，了解詳情 >

10GBase-T Network card install position

最後修訂日期: 2022-06-24

Applied models:

All NAS Series

Applied Firmware:

4.4.3

If you received your NAS, for example a TS-H1283XU-RP-128G. And you found a 10Gbase-T NIC has been installed on slot 2.

According to QNAP website, 10Gbase-T nic was on slot 3.

You do not need to change it, according to the specification of the NAS, the card can be mounted in both ports without any problem, so there is no need for correction.

Also if you leave the card in slot 2 it should be better ventilated because of the space between the cards, but it should work properly in both of them.

這篇文章有幫助嗎？

是否

100% 的人認為有幫助。

需要進一步協助，歡迎前往官方社群發文，與其他用戶及 QNAP 專家交流。前往 QNAP 官方社群

請告訴我們如何改進這篇文章：

這篇文章缺了重點訊息
這篇文章的解決方案沒有用
這篇文章太過複雜
這篇文章包含了不正確的訊息
這篇文章的資訊已過時

如果您想提供其他意見，請於下方輸入。

如果您想提供其他意見，請於下方輸入。