[Thông báo bảo mật quan trọng] Phát hiện các trang web giả mạo Qfinder Pro. Tìm hiểu thêm >

Why can't I connect the Web Server to MariaDB 10?

Last modified date: 2024-06-26

Applicable Products

All NAS series

Scenario

You are hosting content on the QTS Web Server and are unable to initialize a database with the MariaDB 10 app installed from App Center.

Solution

This issue is likely caused by changes to the access port numbers in MariaDB 10 and MariaDB 5. By default, MariaDB 10 is accessible through port 3307. To resolve this issue, use 127.0.0.1:3307 to connect to MariaDB 10 when configuring the Web Server.

Note

You can customize the default access port for MariaDB. If you have done so, make sure to adjust the specified port when connecting to the Web Server.

Further Reading

Why am I unable to connect to MariaDB using phpMyAdmin?

Was this article helpful?

Yes. No.

17% of people think it helps.

Để được hỗ trợ thêm, hãy hỏi những người dùng khác và chuyên gia QNAP trong cộng đồng. Đến Cộng đồng QNAP

Please tell us how this article can be improved:

The article is missing important information
The article's solutions do not work
The article is too complicated
The article contains incorrect information
The article is out-of-date

If you want to provide additional feedback, please include it below.

If you want to provide additional feedback, please include it below.