No fields to put in the Pre-shared key and VPN port

Last modified date: 2022-10-04

Scenario:

In the tutorial, it shows how QVPN is manually configured on iOS and the Pre-shared key and VPN port fields for QBelt are shown. https://www.qnap.com/en-us/how-to/tutorial/article/how-to-set-up-and-use-qvpn However, while setting up a QVPN connection profile, both fields are missing.

Solution:

Please tap on Save button at the bottom to connect first and wait for it to finish loading.

Then tap on Continue button.

And then, you’ll see a window popping up asking for Pre-shared key and VPN port afterward.

Was this article helpful?

Yes. No.

60% of people think it helps.

Daha fazla yardım için toplulukta diğer kullanıcılara ve QNAP uzmanlarına sorun. QNAP Topluluğuna Git

Please tell us how this article can be improved:

The article is missing important information
The article's solutions do not work
The article is too complicated
The article contains incorrect information
The article is out-of-date

If you want to provide additional feedback, please include it below.