Please follow the procedure below to solve this problem.
- Power off the Turbo NAS.
- Remove all HDDs.
- Power on.
- System will make 1 short beep when you power on, and then after 2~4mins it will make a 2nd long beep.
- After the 2nd long beep, please plug in the HDD in sequence, ex: HDD1 --> slot 1, HDD2 --> slot2....etc.
- Please run the QNAP Finder and double click on the Turbo NAS unit.
- Keep following the quick installation setup.
Release date: 2013-04-19
Was it helpful?