QuLog Center doesn't display Access Log

Last modified date: 2026-10-02

Applicable Products

QuLog Center

Symptom

QuLog Center can not work normally when there is no configured volume as log database destination. If this happens, when you open QuLog Center the logs are not displayed and you could see a page similar to below.

Solution

You need to assign the volume where you want to save the logs. To do this, follow these steps:

Select Log Settings in the side menu.
Select the tab Event Logs Settings or Access Logs Settings
In Destination select the desired volume
If you are setting Access Log, please check the connection types that you want to log

Was this article helpful?

Yes. No.

16% of people think it helps.

หากต้องการความช่วยเหลือเพิ่มเติม สอบถามผู้ใช้รายอื่นและผู้เชี่ยวชาญของ QNAP ได้ในคอมมูนิตี้ ไปที่ QNAP Community

Please tell us how this article can be improved:

The article is missing important information
The article's solutions do not work
The article is too complicated
The article contains incorrect information
The article is out-of-date

If you want to provide additional feedback, please include it below.