QNAP Systems, Inc. - Network Attached Storage (NAS)



How to check if the Turbo NAS is a faulty unit?

Applied Models:


If your Turbo NAS is not responding properly, please do the following to check if it is a faulty unit:

  • Turn on the Turbo NAS without hard disk drives.
  • You will hear the first beep upon pressing the power button, and another beep about 2 minutes later.
  • If you did not hear the second beep, there might be a hardware problem with the Turbo NAS. Please contact your local distributor/reseller technical support. 

Note: Make sure the alarm buzzer option for system operations (startup, shutdown, and firmware upgrade) has been enabled in [System Administration] > [Hardware] on the administration page of the Turbo NAS.

Caution: The Turbo NAS must be repaired by professional technicians. Do not try to repair the server yourself.

Release date: 2013-04-19
Was it helpful?
Thank you for your feedback.
Thank you for your feedback. If you have any question, please contact support@qnap.com
33% of people think it helps.