Can I set the NAS as a DHCP server?
Senaste ändringsdatum:
2022-06-24
Applicable Products:
Yes, the NAS Network & Virtual Switch support create DHCP server.
Steps to configure the NAS as DHCP server as below:
1. First, make sure the Network & Virtual switch APP already set in “Advanced” mode
2. In NAS Network & Virtual Switch > Virtual Switch page, click “Add” button to create a new virtual switch.
3. Click “Advanced mode”, select a NAS LAN adapter.
4. Choose “Static IP” & “Manually configure the IP address” option, specify the static IP address for the adapter
5. Enable “NAT” and “DHCP Server” options, and completed the relevant fields.
6. Complete the setup process.
Once completed creating, devices connected to the specified adapter on the NAS would receive IP addresses from the NAS DHCP server.
- Support Network & virtual switch NAS model (Which models support Network & Virtual Switch?)
Yes, the NAS Network & Virtual Switch support create DHCP server.
Steps to configure the NAS as DHCP server as below:
1. First, make sure the Network & Virtual switch APP already set in “Advanced” mode
2. In NAS Network & Virtual Switch > Virtual Switch page, click “Add” button to create a new virtual switch.
3. Click “Advanced mode”, select a NAS LAN adapter.
4. Choose “Static IP” & “Manually configure the IP address” option, specify the static IP address for the adapter
5. Enable “NAT” and “DHCP Server” options, and completed the relevant fields.
6. Complete the setup process.
Once completed creating, devices connected to the specified adapter on the NAS would receive IP addresses from the NAS DHCP server.
