[Viktigt Säkerhet meddelande] Falska Qfinder Pro webbplatser har upptäckts. Läs mer >

How to create a RAID50 / RAID60 storage pool in QES NAS?


Senaste ändringsdatum: 2020-09-04

To create a RAID50 / RAID60 storage pool in QES NAS, please follow the steps below:

  1. Go to Storage Manager > Storage space page.

  2. Select New Storage Pool in Create menu to start the pool creation.

  1. Enter and select below options to create the pool.

Pool Name: Enter pool name here.
Controller: Select the pool owner. (this option only exists in dual-controller NAS)
Enclosure Unit: You are allowed to select disks in the NAS or expansion enclosure.
Disks Lists: Select minimum required disks for each RAID type here.
RAID Type: Select RAID type here.

And click Next button to view Pool Creation Summary.

Click Create button and then click OK to confirm.

A RAID 5 pool is created.

  1. Go to Storage Manager >> Storage space page and select the pool you just created.

  2. Select Expand Pool in Actions menu to perform the pool expansion.

  1. Select these options to expand pool.
    Enclosure Unit: You are allowed to select disks in the NAS or expansion enclosure.
    Disks Lists: Select same amount of disks of previous pool you created. (Ex: 5 disks)  

    And click Expand button to expand the pool.



A RAID50 pool is created.


To create a RAID60 pool, you can repeat same steps but choosing RAID6 type to proceed it.

Var den här artikeln till hjälp?

Tack för din feedback.

Behöver du fortfarande hjälp?

Ställ din fråga i QNAP Community. QNAP-personal och erfarna användare svarar.

Fråga communityn

Berätta för oss hur vi kan förbättra artikeln:

Ge oss fler synpunkter genom att skriva dem nedan.

Välj specifikation

      Visa fler Färre
      Denna webbplats i andra länder/regioner:
      back to top