QNAP Systems, Inc. - Network Attached Storage (NAS)



How to configure hot spare disk for RAID in QES?

In QES system, as long as the disk is initialized and its status is READY, this disk will be treated as global hot spare disk. You don’t need to configure and assign which disk is hot spare disk but you need to reserve the disk whose status is READY to be a hot spare disk.

Ex: In the picture below, there is a RAID 6 (Disk5 - Disk15) group and Disk16 is the hot spare disk.

Release date: 2017-12-01
Was it helpful?
Thank you for your feedback.
Thank you for your feedback. If you have any question, please contact support@qnap.com
50% of people think it helps.